1996 Bmw Z3 Convertible 1.9 5 Speed Adult Driven Garage Kept on 2040-cars

Auto blog

BMW adds new entry-level 320i model, priced from $33,445*

Fans of the new BMW 3 Series here in the US have likely been waiting for one of two models to arrive: the new M3 or the diesel-powered 335d. Well... keep waiting just a little bit longer. Here at the Detroit Auto Show, BMW is showing off the new entry-level 320i that will join the 3 Series lineup this spring, and rather than bringing added performance or efficiency, this car is boasting affordability above all. The 320i has been on sale in other markets since the current-generation 3 Series was introduced, but it goes on sale in the US with a starting price of $33,445 (*)including $895 for destination, which is $3,405 less than the current starting price of BMW's well-liked sedan.
In other countries, the 320i uses either a 1.5- or a 2.0-liter inline-four (both turbocharged), and the US version of the car will be getting the latter engine producing 180 horsepower and 200 pound-feet of torque. For comparison, the current 328i, which uses this same engine, produces 240 hp and 255 lb-ft of torque. As expected, performance of the 320i will suffer with BMW estimating a 0-60 mile-per-hour time of 7.1 seconds, but it still has the same 130 mph top speed as the 328i. Oddly enough, despite the lower output, BMW's expected fuel economy for the 320i equipped with rear-wheel-drive and the eight-speed automatic transmission actually matches that of the current 328i with 23 miles per gallon city and 33 mpg highway, and those numbers are actually lower than the 328i with the manual gearbox.
It sounds like most of the usual 3 Series options will be available on the budget-minded 320i, including the choice of xDrive all-wheel drive, BMW Assist and numerous packages including a Sport pack and Premium pack. For a lot more information on the 320i, most of it general information on the F30 3 Series, scroll down for BMW's press release.

Giles Taylor succeeds Ian Cameron as head of Rolls-Royce design

Back in the day, a Rolls-Royce looked pretty much the same as a Bentley, but with a different grille. Once BMW took over Rolls-Royce, however, it was faced with the challenge of visually separating itself from its former sister brand. And most would agree that it did so pretty well. But its cars have looked pretty much the same ever since. What Rolls-Royce needs, then, is a bit of a design shake-up. And that's just what this latest appointment could bring.
After a baker's dozen years as design director at Rolls-Royce (and twenty years designing for the BMW Group altogether), Ian Cameron is retiring from his post. In his place, Rolls-Royce has named Giles Taylor as its new director of design. In his new capacity, Taylor will report directly to BMW Group chief designer Adrian van Hooydonk, and be responsible for all design matters related to the Rolls-Royce brand and its products.
Taylor was promoted to the role from his previous position as head of exterior design for the marque, a position he's held for barely more than a year. We'll be eagerly watching to see what the veteran British car designer has in store for the future of Rolls-Royce. In the meantime you can read the full announcement below.

BMW M3 and M4 will rock 430 hp from twin-turbo six with standard manual [w/video]

We're not sure which spec we're most intrigued by for the new BMW M3 and M4: the twin-turbo six-cylinder with 430 horsepower and "far beyond" 369 pound-feet of torque, the 3,300-pound curb weight or the standard six-speed manual transmission with automatic throttle blipping on downshifts. That engine is fitted with both Valvetronic and Double-Vanos, twin-wire arc-spray coating in the cylinders instead of liners to save weight, a track-ready cooling system with additional radiators, a forged crankshaft, dry-sump lubrication and a magnesium oil sump. BMW says its "high revving concept" has a redline beyond 7,500 rpm.
In the M4, it will be pulling a coupe with "a weight of just under 1,500 kilograms," which is 3,300 pounds to you and me. That number is said to include no driver and 90 percent fuel, but we're still waiting on the exact number and specs. BMW says it's "around 80 kilograms lighter than a comparably equipped predecessor model," putting the power-to-weight ratio at something like 7.68 pounds per horsepower at the same time as it helps reduce fuel consumption by 25 percent. The use of carbon fiber reinforced plastics (CFRP) for the roof, drive shaft (with no center bearing), trunk and front strut brace, and forged aluminum for suspension components, have aided in the weight loss. This time around, the sedan - the M3 - will also get a CFRP roof.
The default option will be a six-speed manual.