1997 Bmw Z3 Blue/beige 73k Miles Original Owner 6 Cyl Manual Transmission on 2040-cars

Auto blog

2013 Nissan GT-R and 2013 Alpina B6 mix it up on track and street

Here we have Autocar making an unforeseen comparison: the Nissan GT-R against the Alpina B6 at Brands Hatch and on public roads. Steve Sutcliffe clobbers the circuit in the 3,828-pound, all-wheel-drive sports car, then sees how well the 4,114-pound, rear-wheel drive grand tourer does against it.
Sutcliffe says there are quite a few similarities between the two cars, but that's really only on the spec sheet. The Nissan's got two turbos attached to its 3.8-liter V6, 542 horsepower and 465 pound-feet of torque. The Alpina's got two turbos attached to its 4.4-liter V8, 532 hp and 528 lb-ft. But one's brief is to be a monster on the track, the other on the boulevard, and if there's anything the video demonstrates, it's each car's focus.

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.

BMW M3 and M4 CSL not in the cards

We aren't sure whether to file this one under "good news" or "bad news." BMW confirmed to Top Gear that there "are no plans" for lightweight versions of the new M3 and M4, in the same vein as the E46 M3 CSL (despite rumors to the contrary). The reason?
"There wasn't a CSL on the previous generation, and the way we look at it is like this: the CSL was great because it had this real focus on lightweight engineering. But we've already done that with these new cars. We've made them as light as possible - they come in under 1500 kilograms (3,306 pounds), which for a car like this is incredible," said Matt Collins, BMW's product manager for small to medium cars.
Now, as much as we love the idea of a hardcore version of any car, we appreciate BMW's point of view that the newest Ms are already as light and tough as they need to be. Collins elaborated, saying, "Rather than doing a halfway house to begin with and then rolling out a CSL, we thought we'd make the 'real' car as light as we possibly could. So we've no plans whatsoever to make a lighter, harder version just yet."