Find or Sell Used Cars, Trucks, and SUVs in USA

1966 Chevrolet Chevelle Ss on 2040-cars

US $29,000.00
Year:1966 Mileage:650 Color: Black /
 Black
Location:

Wayne, Nebraska, United States

Wayne, Nebraska, United States

Send me an email at: adrieneasschulman@veggies.org .

A true 138 VIN number car manufactured in Freemont CA, original equipment, door post and frame tags matching, originally Marina Blue car, now gorgeous Tuxedo Black car. 650 total miles since completion of:

Frame off restoration, frame and all sheet metal media blasted, then painted. No rust, completely original sheet metal, floor plan, hood, deck lid, fenders and quarter panels, with new glass, all new rubber.

Interior, front and rear seats new springs and reupholstered, new door panels, headliner, sail panels, dashboard, new instrument cluster– knee knocker tachometer, correct AM/FM radio by Retro Sound. Period correct conversion to 1966 factory OEM GM Air Conditioning. AC BLOWS COLD, all lights and accessories work

Engine, began as L88 crate motor block, trued, align honed, and bored 60 over stroked ¼ in, Eagle rods, and twisted forged steel crank 4340, internally balanced. Edelbrock Victor Jr. D port open chamber, CNC heads, ported, polished, and bench flowed, chambers cc matching. Competition Cams roller hydraulic camshaft, 11-411-8, lifters and roller rockers, intake is original 1967 Corvette 435HP tri-power, high rise, port matched to heads, with blueprinted Holley 2300 carbs – ZERO bog or throttle lag. Total displacement 496.5 CI.

Suspension set up by Dick Gulstrand’s original shop, polyurethane bushings front, rear, and body mounts.

Power Disc Brakes 4 wheel disc brakes, front brake Corvette C6 calipers, drilled and slotted rotors, rear brakes, Stainless Steel Brakes Corp, 2 piston calipers slotted rotors, ABS Power Brake hydraulic power brakes.

Transmission and driveline Tremec Magnum 6 Silver Sport Transmission kit, close ratio, steel flywheel, SFI Rated 6.1 bell housing, Center Force clutch, hydraulic clutch kit, CNC fabricated cross member, custom balanced drive shaft, 3.42 ratio Torsen differential with steel axles.

Exhaust custom fabricated, ceramic coated headers, 2¾ inch primaries 3.5 collectors, Race Ready remote control cutouts, with Dr. Gas X pipe and Flow Master mufflers.

Auto Services in Nebraska

Russwood Auto Center ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Parts & Supplies
Address: 8350 O St., Martell
Phone: (402) 489-7156

Kearney Motors & Classic Muscle ★★★★★

Used Car Dealers, Car Rental
Address: 1840 Highway 30 E, Kearney
Phone: (308) 236-7009

Heartland Auto & Truck Repair ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting
Address: 306 Development St, Crookston
Phone: (402) 376-3407

Anderson Auto Body ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Body Repairing & Painting
Address: Humphrey
Phone: (402) 564-9518

A & B Motors ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 35399 US Highway 34, Max
Phone: (308) 276-2470

Vern`s Auto Tech ★★★★

Auto Repair & Service
Address: 1402 P St, Broadwater
Phone: (866) 595-6470

Auto blog

Final C6 Corvette built in Bowling Green

Fri, 01 Mar 2013

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

Next Corvette ZR1 to get 700 horsepower?

Tue, 19 Feb 2013

Word has it General Motors may offer as much as 700 horsepower in the C7 Corvette ZR1. Motor Trend reports the next Corvette Z06 will continue to rely on its naturally aspirated 7.0-liter V8 engine for thrust, but the lump will deliver substantially more power. How much more? MT says the engine could deliver up to 600 ponies. That's a jump of 95 horsepower over the current Z06, though no figures have been finalized as of yet. Right now, GM is reportedly waiting to see what sort of grunt it can glean from the next ZR1.
The automaker has already made it clear it will resurrect the LT5 name for the new supercharged V8, and if GM is already pulling 600 from the Z06, the big dog ZR1 would theoretically offer 700 horsepower. Either way, the range-topping Corvette will be suitably insulated from its less potent siblings. Stay tuned. We aren't likely to see the Z06 for at least a year, with the ZR1 trailing along at some point there after.

GM says hybrid Corvette no laughing matter [w/poll]

Fri, 30 Aug 2013

When Mark Reuss was in LA recently, he sat down to have a few words with the scribes at the Los Angeles Times. When the issue of a hybrid Corvette came up, Reuss answered with "Don't laugh." The General Motors president is a complete fan of the possibility, calling it "attractive" and "really fun," believing it would improve GM expertise and that "people would love it."
Naturally, the president being supportive of an idea doesn't give indication that a hybrid Corvette is on the way. However, with supercars like the Porsche 918 Spyder and Ferrari LaFerrari giving hybrid tech a solid, if remote, place in the performance car world, the inexorable trickle-down of technology means we shouldn't be surprised if and when it does happen.
And now that we have that non-negative half-answer to a speculative question, it would be irresponsible for us not to commence rumormilling for the C8 Corvette. Taking Reuss at his word, the C8 will obviously be a hybrid with all-wheel-drive - the left side wheels driven with electric motors, the right side with the mid-mounted, four-cylinder diesel engine. With coefficient of drag of just .16, figure on a 0-to-60 mile-per-hour time of under 2 seconds and an all-electric range of something like 30 miles at top speed. Don't forget, folks, you read it here first.