1965 Chevy Impala 409 4-speed 4.11 Rear 2-door Hardtop Very Rare California Car on 2040-cars
Wind Gap, Pennsylvania, United States
Body Type:Coupe
Engine:409 CUBIC INCH V8
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 8
Model: Impala
Trim: 409 & 4-SPD 2-DOOR HARDTOP
Drive Type: REAR WHEEL DRIVE
Mileage: 117,219
Exterior Color: White
Warranty: Vehicle does NOT have an existing warranty
Interior Color: Black
CONTACT JEFF AT 570 977 0741. Up for sale and your consideration is a very rare equipped car. The ultimate factory sleeper ! What we have here for sale is a 1965 Chevy Impala 2-door hardtop bench seat car with a 340 horsepower 409 & 4-Speed & 4.11 rear. Extremely rare in this combination as early 1965 was the end of production for the legendary 409 engines. They were only offered until February of 1965 and then the 396 big blocks replaced them. So to find a 409 & 4-speed car today in this package is an extremely rare offering. Please take the time to look over all the photos here. I have a total of 50 photos of the car that I will be happy to send to any prospective buyer upon request. Just give me a call and I can send them out. I don't have a window sticker or a build sheet for the car, but I feel this is a true 409 4-Speed car based on physical inspection. It has dual steel lines coming from the gas tank to the engine that have obviously been there since 1965. The fuel line is 3/8". The original back up light switch was old and inoperative and was replaced with a new one. The bell housing, transmission, shifter and driveline all appear original. The original hold down ring for the shifter boot was found under the seat and used to hold down the new replacement shifter boot which is unique to a bench seat car. The numbers are as follows: The VIN # is 164375C111222 designating a 1965 Impala built in Southgate California. The last six numbers (production #s) are just plain interesting...111222 . The data plate shows a C code for Ermine White and a trim code of 811 for black vinyl interior. There is a # 70 after ACC on the data plate that I couldn't find a breakdown for. Engine code on engine flat boss is JB designating 1965 409-340HP manual trans engine. The original carburetor #7025123 was working poorly, so it was removed and replaced with a late model Edelbrock so the car would be driveable without problems with the fuel. The original carburetor of course goes with the car and the original tag is still on the carburetor. The 4-Speed trans is # 3851325 which designates a 1964-1965 Muncie M20 unit with a 2.56 1st gear. Transmission also appears to have been in the car since 1965. The engine runs great and appears to have been rebuilt somewhere along the line with new freeze out plugs installed. Since I don't have any receipts for a rebuild I can only assume by the way it runs and it's appearance that is a rebuilt engine. It is freshly serviced as well with an engine oil and filter change, new spark plugs, new air filter, and new fuel filter. The rear differential is a 12-Bolt non-posi unit with 4.11 gears. I do have a posi rear with 3.23 gears that goes with the car at the buyers request. I also have the original floor mats to include with the car and there is a trunk mat included. The interior has been renewed with new upholstery, door panels, carpet, headliner, etc. The factory in dash tachometer works. A rare optional clock sits on top of the dash. The car is also equipped with a rare tilt wheel. The lights and wipers all work. The AM radio and heater blower motor do not work. Underside photos of the car are provided so nothing is left to the imagination. Although this is a California car, it was stored outside for some time while in California, and unfortunately had worn out window and trunk seals, causing some rust on the left side floor and trunk. The rear floor was patched from the inside. The trunk floor was professionally replaced along with the gas tank being replaced with a new unit. Please refer to the underside photo and in trunk photo. Looking beyond the left side floor rust one can see that the rest of the underside is all-solid 1965 metal including body mounts and floor supports which are notorious for rust. Window and trunk seals have been renewed. Front suspension and shock absorbers have been renewed. Dual exhaust has also been replaced with Flowmaster mufflers and pipes which have a fantastic sound ! All the glass is fine. The body is rust free and has a presentable appearance with a few small touch ups. This is not a show car but certainly does qualify as an extremely rare one ! Since this car was purchased pretty much as you see it with only minor upgrades, my description is based soley on a thorough physical inspection. If any prospective buyer has any questions on the integrity of this car, I welcome the opportunity to show this car in person by appointment only to answer any questions. Although this is not a show car, it would certainly be a hit at the local cruise or car show. It's what I call "show me another one" car. I have a clean Pennsylvania title in hand ready for transfer to the new owner. The car has Antique status on the title and shows California as the prior title state. Mileage is listed as exempt on the title as many older cars are that do not have a sixth digit on the speedometer. The title will be processed properly by a licensed Pennsylvania Notary official into the new owners name. A complete bill of sale will also be provided to the new owner in their name. There will be no exceptions to this. Again looking to complete an honest sale here.
On Jun-07-13 at 10:25:45 PDT, seller added the following information:
After receiving multiple requests I forgot to include the engine casting number. It is 3857656 which in the book states 1965 Passenger car 409. The flat boss on the front of the motor is stamped T1211JB That corresponds to the Tonowanda NY assembly plant for engines and it was built on December 11th. I also have registration and insurance cards for the car from California and a shipping manifest for the car when it was shipped from California to Pennsylvania on July 16, 2002 so it has spent only 10 years and 11 months in Pennsylvania. Most of its life was spent in California.
Chevrolet Impala for Sale
1995 chevrolet impala ss sedan 4-door 5.7l(US $12,500.00)
Chevrolet impala keyless entry cruise control cd player runs good no reserve
1964 chevy chevrolet impala ss 64 beautiful car ready to drive home
Certified low miles one owner clean excellent condition
1968 impala super sport
1958 chevrolet impala sport coupe very good condition
Auto Services in Pennsylvania
Yorkshire Garage & Auto Sales ★★★★★
Willis Honda ★★★★★
Used Car World West Liberty ★★★★★
Usa Gas ★★★★★
Trone Service Station ★★★★★
Tri State Preowned ★★★★★
Auto blog
New Chevrolet Silverado to be revealed on Facebook on Thursday
Tue, 11 Dec 2012There's not much to see here, but if you're one of those waiting for the reveal of the 2014 Chevrolet Silverado 1500, above is the teaser image that Chevrolet posted on its Facebook page. We've seen the truck in form-fitting camo before, and even less can be made out here beyond those seriously punchy Silverado-esque fenders and the knowledge that the projector-beam headlamps teased previously do indeed work. We'll have to wait until Thursday for a full perusal of the "bold exterior design" and "careful attention given to every detail" we've been promised.
Gathering intel and rumors, magnesium and aluminum contribute to the Silverado's weight loss plan, the purported "High Country" top-tier trim will contribute to luxury pickup truck competition and profit margins and the next-generation small-block V8 will contribute to improved fuel economy. On the engine note, there have been rumors of available V6 engines, and when Facebook user John Jones asked "Where's your answer to that EcoBoost Chevy?", the Bowtie replied "stay tuned on the 13th. We think you'll be pleased...".
Along with the "Raise the Bar" tag, Chevrolet says of the Silverado, "You asked, we delivered." You can watch the reveal live on Chevrolet's Facebook page at 9:30 am EST, this Thursday, December 13. The GMC Sierra 1500 will also be there, and we'll see both in person at the Detroit Auto Show in January.
GM investing $167m in Spring Hill for new midsize vehicles
Tue, 06 Aug 2013General Motors has announced a large investment in its Spring Hill, Tennessee facility. The former home of Saturn production will be getting a $167 million addition to a previously announced $183 million, to cover a pair of new midsize vehicles. The investment is expected to create 1,800 jobs at the factory.
That $350 million is being divvied up for a pair of programs at Spring Hill. The first will take the bulk of the money ($223 million) and create 1,000 of the 1,800 jobs, while the other will take the remaining $127 million and generate the leftover 800 positions. But GM says the investment will cover "midsize vehicle programs." So what could they be?
The leading candidate in our minds is a new crossover for Buick, called the Anthem, that will slot between the Encore and Enclave, but will be slightly smaller than the Equinox and Terrain. As we've explained, the new model will likely be the first product to sport GM's new D2UX platform, which will eventually replace both the Delta and Theta platforms. Spring Hill is already building the Equinox, so there could be some credence to this theory.
2014 Chevrolet Corvette Stingray Convertible is a Swiss hit
Mon, 04 Mar 2013We've just received an early peek at the 2014 Chevrolet Corvette Stingray Convertible here at the Geneva Motor Show. General Motors was kind enough to let us attend the final dress-rehearsal for its press conference scheduled for tomorrow's opening media day, and we've come away with a good look at the droptop C7 in person.
In the metal, the new Corvette Convertible seems somehow less avant-garde than the Coupe, even in Z51 Performance Package guise. That's not necessarily a bad thing - more of an observation. That initial impression may be because the C7's new greenhouse is one of its most prominent departures from Corvettes past. While we didn't get to see the top erected, there's no rear side window in the stock images that Chevy has already released, suggesting the C7 convertible's profile will look a lot like its C6 predecessor. And with the new power tonneau cover in place, there are also no rear ducts that come as part of the Z51 package (they've been moved under the car).
As with its predecessor, the tonneau is a handsome double-bubble piece, and the body-color "waterfall" element into the cabin between the seats has made it to the new model as well. Thus, the overall look with the top down should be a bit more familiar to prior-gen C6 owners - if you're one of those put off by the C7's new shape, you'll probably appreciate the convertible bodystyle more than the coupe.