1937 Chevrolet, Chevy 1/2 Roadster Pick Up With Extra Cab-package Deal Only! on 2040-cars
Clay Center, Kansas, United States
Vehicle Title:Clear
Make: Chevrolet
Drive Type: 327 Engine, 3 speed and 3:70 Rear End Gear
Model: Other Pickups
Mileage: 100
Trim: Stock
Up for sale is a project that I have been working on and off from the late 80's-early 90's. I am cleaning out due to age, health and other interests. This will definitely make a nice ride, rat rod-whatever your wants might be!
I had the roof cut off and extended the cab approximately 12". I made a removable roll bar out of 1/4" thick gas pipe for sturdiness and safety. The engine is a 327 Chevrolet with a mild cam. Running a 3 speed with a new Hurst shifter and a 3:70 rear end. Brakes, shocks, and exhaust are all new. Front axle is a dropped tube axle (new) with new king pins. Steering is a stock box with a late model column. There is only about 100 miles on the odometer since I got it all running. Engine does have more miles, but not sure how many. Runs strong!
Has a plastic windshield in it now but sale includes a safety glass insert to go with the truck. Grille shell is an original and had about 3 new bars put in, straightened and then powder coated the gray that you see. Has 14" x 6" Centerline wheels on front and 15" x 10" Centerline wheels on the rear. Fenders are fiberglass all the way around and are like new. The passenger side would need some work or replaced as it sliced through a post??
The running boards are made out of 16 gauge metal and have been welded to the original boards.
The original boards were cut along the inside lip to allow for drilling of holes in the new covers so I could run side board lights before the new metal was welded on. NO holes yet! The running board taper out on each side about 3" wider to make the rear end/fenders give a tubbed look. The metal that you see in the photo is for the front and sides of the bed I was going to make as well as the square tubing for the stake pockets.
Mufflers are the quiet type but still have a nice sound. The hood is a one piece hood but needs to be finished welded. There are metal side filler panels that go with the truck to finish out the sides. One has already been cut out so there is a start for a pattern, but would recommend creating a template before cutting. EVERYTHING bolts in/on the frame/running gear. There has been no welding other than the rear shock mount/cross member.
Wiring panel is from Affordable Street Rods and has some extra terminals that can be used. The only items wired up are the horn, lights, brakes, mechanical speedometer, turn signals-etc. Just those items that make it legal and street worthy.
Doors are suicide and need fitting and completed. The filler panels for both sides are included for the cab extension and to give the driver and passenger more available leg room as well as safety from the roll bar. Also included is the Inside door skins. I have tried to include photos that show how everything is bolted in.
As shown in the photos, everything is included for the cab that I had to cut off. I guess you could extend that as well if you wanted to. Also included is a top folding assembly off a 1964 MGB that I was going to use for a pattern or re-work to fit on the truck. There are many other parts-including the original rear spring hangers that go with this truck.
Also included with the project is another fairly complete 1937-1938 Chevrolet cab. Includes 3 doors and all the hinges. There is a good driver door and 2 passenger doors to make one good one. The cab does have the original gas tank. If you don't want to finish the roadster, then put on this cab? YOU can do what you want and NO I WLL NOT PART OUT THIS SALE! I AM GETTING CLEANED OUT!
These items must be picked up by buyer as I cannot deliver or ship. Will sell world wide. $500 by PayPal due at close of auction.
This is a heck of a deal with all of the hard work done or at least started and will provide many miles of fun and enjoyment. Rat Rods are in so why not go with the flow? I will be throwing in any extra parts that I can find and they will go with this auction. Don't let this one pass you by.
Chevrolet Other Pickups for Sale
1986 chevy k10 1/2 ton
2005 chevrolet kodiak c4500 truck
1954 chevy pickup truck 3100
1949 chevy pickup truck 3100
1952 chevy pick up
1934 1/2 ton chevy pickup barn findAuto Services in Kansas
Wininger Towing ★★★★★
The Shop ★★★★★
The Auto Clinic ★★★★★
Talley`s Collision Repair Service ★★★★★
Smith Specialty Automotive ★★★★★
Rusty`s Auto Sales ★★★★★
Auto blog
Pushing Back: GM expanding Chevrolet into Korea, Daewoo out
Thu, 29 Apr 2010Chevrolet Camaro goes to South Korea - Click above for high-res image
General Motors decided several years ago to begin heavily promoting Chevrolet as its global mainstream brand even in markets where its existing brands like Opel and Daewoo were a dominant force. Today, at the Busan Motor Show in South Korea, GM Daewoo president Mike Arcamone announced that the Camaro would lead the way in GM's efforts to market Chevrolet in South Korea.
For now at least Chevrolet and Daewoo-branded vehicles will coexist in the Korean market. However, while we were in China last week GM officials told us that the Daewoo brand, which has been somewhat tainted by past quality issues, would eventually be phased out in favor of Chevrolet. When the new Aveo launches next year it will likely be badged as a Chevrolet even though GM Daewoo is in charge of engineering the car.
Joe Flacco wins C7 Corvette along with MVP honors
Mon, 04 Feb 2013As part of a longstanding tradition, the MVP of Super Bowl XLVII, Joe Flacco, quarterback for the Baltimore Ravens, was given a new car directly after the game and trophy celebrations. For 2013, that car is a 2014 Chevrolet Corvette Stingray, and it was presented to Flacco by Rick Flick of Banner Chevrolet, a dealership in New Orleans that was wiped out by Hurricane Katrina in 2005 before returning to prominence as the only Chevy dealer in Orleans Parish.
Last year, Super Bowl MVP Eli Manning took home a 2012 Corvette GS Centennial Edition. Manning also won in 2008, when he selected a Cadillac Escalade Hybrid as his reward. In 2011, quarterback Aaron Rodgers accepted the keys to a Camaro convertible.
Though we're most definitely an auto-obsessed group, we did watch the Big Game along with nearly everyone else in America. And we've gotta say, as if winning the Super Bowl and receiving the Tiffany-designed Pete Rozelle Trophy wasn't enough for the multi-millionaire MVP athletes, a brand-new C7 seems like an awfully generous prize. Scroll down below for an official announcement from General Motors.
2014 Chevrolet Corvette C7 Convertible offers a few more views before reveal
Mon, 04 Mar 2013Over the weekend, Chevrolet released its first images of the new 2014 Corvette Stingray Convertible. Now, ahead of the droptop's official introduction tomorrow at the Geneva Motor Show, the automaker has given us a few more shots of the softop C7 showing off the car's rump albeit from a high, strategically positioned angle.
From this angle, it's hard to get a sense for how long and flat the decklid really is, but we can easily see that, like the rest of the C7's design, the new convertible's decklid and tonneau cover are far more detailed than the current car. We also get a better look at the rear haunches sans brake vents, which have apparently been moved to underneath the car in order to accommodate the top's hard cover.
As for the overall styling of the C7 convertible, with the top erected, we get some idea of what a coupe design (as opposed to the Stingray's fastback shape) would look like on this car. The C5 Corvette most recently had a coupe model that did away with the large glass hatchback, and we recently reported on a low-cost "coupe" model potentially being added to the C7's repertoire.