2003 Dodge Dakota on 2040-cars

Auto blog

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

Does the future of Fiat-Chrysler include Dodge?

Wards Auto reports the future of Dodge is looking uncertain. Fiat has more or less laid out it's game plan for the next few years, and while the Chrysler, Fiat and Jeep lines are set to receive plenty of love, Dodge isn't so lucky. Fiat has already hobbled Dodge significantly by splitting off the brand's trucks into a separate Ram line.
Wards says that after the Avenger rides off into the sunset early next year, Fiat-Chrysler won't replace the model, leaving a gaping midsize hole in the Dodge lineup. The report also cites unnamed sources as saying that at least two other current Dodge products will move to the Chrysler line.
One of those could very well be the Grand Caravan. Chrysler has already made it clear that it plans to trim redundancy between its minivan offerings, but it has yet to clarify which other vehicle could sail under the Chrysler banner moving forward. Either way, such changes to the product line would theoretically leave Dodge with just four models.

2015 Dodge Charger darts into NY traffic

Meet the refreshed 2015 Dodge Charger; notice anything different? You would have to be pretty farsighted to miss the sedan's new Dart-like nose, and it's likely going to be quite polarizing to the car's fans. Gone are the previous furrowed, aggressive headlights in favor of a wider, friendlier look.
While the more rounded headlights and narrower grille are going to be the first thing most people notice, Dodge claims its designers have made changes to nearly every panel on the Charger. The hood dips down deeper at the front, and the doors show off a more angled version of the car's shoulder blister. LED running lights and taillights are standard on all models, and SXT and RT trims get LED foglights. Even though the front might not be as intimidating, Dodge has hung onto the sedan's muscular stance with angular contours making up the rest of the redesign.
Under the hood is the same engine range you've come to know over recent years. Both the 5.7-liter V8 and the 3.6-liter V6 return for 2015, with the Hemi making 370 horsepower and 395 pound-feet of torque, and the standard Pentestar outputting 292 hp and 260 lb-ft. All models are now equipped with Chrysler's TorqueFlight eight-speed automatic as standard. Fuel economy for V8 Chargers is predicted at 16 miles per gallon city and 25 mpg highway, compared to 15 mpg / 25 mpg last year with a five-speed automatic. All models also come with electric power steering, and the axles are cast from aluminum to save weight.