1999 Dodge Durango Slt Sport Utility 4-door 5.2l on 2040-cars

Auto blog

2013 Dodge Challenger R/T Redline revs into Chicago

When Dodge released the Challenger Rallye Redline last year, it brought a new dimension of styling to the car's classic muscle car lines, but it was only available in V6 form lacking the oomph to back up its sinister appearance. To remedy that situation, Dodge is unveiling the Challenger R/T Redline, powered by a Hemi V8 engine, at the Chicago Auto Show.
Other than the extra cylinders, most of the R/T's Redline package carries over from the Rallye model including the custom-look 20-inch black chrome wheels with red paint accents, but the R/T version of the package gets more of a retro look to the side stripes with graphite graphics featuring Redline lettering. Cars equipped with the six-speed manual transmission will get a performance-tuned, low-restriction exhaust allowing the engine to produce 375 horsepower and 410 pound-feet of torque; cars with the five-speed auto are rated at 372 hp and 400 lb-ft, but they do offer a bright chrome Mopar t-handle shifter and steering wheel paddle shifters.
The R/T Redline Group is offered only on cars painted in Billet Silver, Granite Crystal, Bright White and Pitch Black, and it adds just $1,995 to the MSRP of the Challenger R/T (starting at $31,990) and the Challenger R/T Plus (starting at $33,990), which adds features like Nappa leather and Boston Acoustics speakers.

Chop the top of your new Dodge Viper for $35,000

We have good news, and we have bad news. First, the good: It's now possible to get a brand-new Dodge Viper roadster, which is nice, considering we're in the dead of summer and many of us like wind-in-the-hair motoring. Now, the bad: This is not a factory option from the automaker, instead coming courtesy of an aftermarket company called Prefix Performance, and that means it's going to cost you some serious coin.
Called Medusa, this drop-top Viper was created without the knowledge or consent of Dodge, but that's probably fine because Prefix works with the automaker already for the final preparation of the American supercar, including paint. According to the company, the current, fifth-gen Viper was built with a convertible version in mind, so no chassis strengthening is required. From the looks of the somewhat grainy photos available, the conversion appears of very high quality.
Want one? Well, that means you're going to need to procure a Viper - Prefix has 10 units ready for transformation as it stands - and that's going to cost at the very least $102,485. Then, you'll need to write a check for an additional $35,000 for Prefix to surgically remove the car's roof. Thing is, for that kind of cash, a prospective owner could buy, among other very nice options, a Viper hardtop and a loaded Miata, or a Corvette Stingray convertible and several pockets full of change. Or, perhaps a new Viper hardtop and a used, first-gen Viper convertible?

25,000 Jeep Grand Cherokee, Dodge Durango SUVs recalled over brake feel

Chrysler has announced that it is recalling over 25,000 Jeep Grand Cherokee and Dodge Durango SUVs from several markets over concerns about brake feel under hard braking. The affected models are from the 2012 and 2013 model years, although the actual dates of production aren't available. 18,700 are in the US, while 825 are in Canada, 530 are in Mexico and a further 5,200 outside of North America.
According to a statement, Chrysler was informed of the issue by a component supplier for the Ready Alert Braking system, which primes the brakes in anticipation of an emergency stop. A component in the system was restricting the flow of brake fluid too much.
As Chrysler is quick to point out, the way the brakes functioned was in compliance with regulations and there are no reported cases of drivers losing braking power. Instead, the issue rests with what Chrysler calls a pedal feel that "was not consistent with customer expectations." So it would seem Chrysler is being proactive and fixing a problem not because there's a legal issue at work, but simply because it doesn't feel the way the manufacturer wants it to. Well done.