2005 Dodge Neon Srt-4 Sedan 4-door 2.4l on 2040-cars
Mount Vernon, Washington, United States
Engine:2.4L 2429CC 148Cu. In. l4 GAS DOHC Turbocharged
For Sale By:Owner
Body Type:Sedan
Transmission:Manual
Fuel Type:GAS
Warranty: Vehicle does NOT have an existing warranty
Make: Dodge
Model: Neon
Options: Bucket Seats, Alpine Stereo, Leather Seats, CD Player
Trim: SRT-4 Sedan 4-Door
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag
Power Options: Air Conditioning, Power Locks, Power Windows, Power Seats
Drive Type: FWD
Mileage: 129,561
Disability Equipped: No
Sub Model: SRT-4
Number of Doors: 4
Exterior Color: Black
Interior Color: Black
Number of Cylinders: 4
This is one of the few well built Dodge Neon SRT-4 cars. The engine has been completely re-built internally using only the highest quality performance parts and OEM Mopar parts from dodge, not foreign parts from part stores. It runs better than new, with a solid driving experience. Engine is fine tuned and balanced and you can feel it as you accelerate, it also aids the efficiency, boosting the fuel economy to 35mpg. Plenty of power to enjoy, this car is extremely fast.
All original parts come with the vehicle-- None are damaged. These include:
- Stock Clutch
- Stock pistons, rods, and rings (they will not fit back into the car now because the engine block has been bored .020 larger)
- Stock Flex Plate(part of old flywheel)
- Stock Flywheel
- Original Oil Pump(Still functional, but it is standard practice to replace when engine is rebuilt)
- Prothane solid motor and transmission mounts
- ACT Performance clutch and Lightweight Flywheel
- JE Pistons 8.5:1 Compression, .020 overbore
- JE Performance Pistons Rings
- Eagle Rods
- Gates Racing Timing Belt
- AEM Short Ram Intake
- OEM Clutch Pivot Fork(can wear out during lifetime of vehicle, replaced because it was taken apart anyways)
- OEM Clutch Pivot Ball(can wear out and cause clutch to be hard to disengage and make shifting more difficult, replaced for same reason)
- OEM Head Gasket Set(head gasket, intake manifold gasket, exhaust manifold gasket)
- OEM Cover Oil Inlet Seal(Oil pick-up tube o-ring)
- OEM Oil Cooler o-ring
- OEM Oil Pump
- OEM Rear Main Seal
- OEM Front Main Seal
- OEM Main Bearing
- OEM Rod Bearings
- OEM Oil Pan Gasket
- OEM Hydraulic Lash Adjusters
- Diablosport Predator and USB interface
- WeatherTech Wind Guards for windows
- Balance Shafts removed during build +20hp
- Receipts and certifications for all balancing of rods, pistons, flywheel, dampener pulley, crankshaft, and clutch. Good for 7000rpm+. Balanced within .1 gram.
- Receipts for head machining
- Receipts for all parts as well
BRAND NEW PAINT JOB LESS THAN 2000 miles driven with it. Thick Clear coat, it is not your basic paint. Very glossy.
On Jan-13-13 at 22:39:36 PST, seller added the following information:
I have just uploaded new photos of the car including pictures of the recent paint job in progress.
From the photos you can see the extensive work done to the car in the body shop, including all of the precise work on every rock chip.
Very close attention to detail was used in every aspect of the car.
Dodge Neon for Sale
- 2004 dodge neon sxt(US $4,999.00)
- (US $200.00)
- Sxt 2.0l cd alloy wheels climate control cloth upholstery reclining seats clock
- Only 15k miles - lots of upgrades - rare to find in such condition !!!!1(US $14,900.00)
- 2004 dodge neon sxt auto trans, cd runs and drives no reserve nr no title!(US $1,000.00)
- Srt4 race car for track or street fun car well built(US $10,995.00)
Auto Services in Washington
Yakima Collision Repair ★★★★★
Walker`s Renton Subaru ★★★★★
Trend Imports ★★★★★
Total Mobile Automotive Repair ★★★★★
Top of The Line Professional Reconditioning ★★★★★
Toby`s Battery & Autoelectric ★★★★★
Auto blog
NHTSA probing Ram recall pace, communication
Tue, 28 Oct 2014The National Highway Traffic Safety Administration has announced that it's looking into Chrysler Group's handling of a pair of recalls affecting roughly one million Ram pickup trucks. Reuters is reporting that the regulatory agency is focusing on the availability (or lack thereof) of parts and "poor communications" from the automaker in its investigation.
"Customers have been advised in accordance with the regulations governing recalls," Chrysler spokesman Eric Mayne told Reuters via email. "We are continually replenishing our supply of replacement parts. Chrysler Group regrets any inconvenience our customers may have experienced."
NHTSA disagrees, arguing that the recalls, which affect 972,000 trucks from 2003 to 2012, are being delayed by the lack of parts.
Chrysler recalls 1.2 million Ram pickup trucks
Sat, 09 Nov 2013Chrysler has announced that it will issue three separate recalls that will cover as many as 1.2 million Ram pickup trucks for "steering-system tie rods that may have been misaligned during assembly or steering-system service." The vast majority of these trucks were sold in the United States, though some trucks in Mexico, Canada or overseas will be called in, as well.
The largest of the three recalls covers an estimated 842,400 model-year 2003-2008 Ram 2500 and 3500 trucks. Two smaller campaigns will bring 294,000 model-year 2008-2012 Ram 2500 and 3500 pickups, chassis cabs and 2008 Ram 1500 4x4 Mega Cabs; plus 43,500 model-year 2008-2012 Ram 4500 and 5500 4x4 chassis cabs into the dealer to be checked and repaired if necessary.
This is a very large recall, and Chrysler says it is "casting the net wider than necessary to identify those vehicles that require repair." The automaker estimates that "as many as 726,000 may not need repair."
Challenger A/T Unlimited Concept could be your next Hellcat-powered ORV
Fri, 29 Aug 2014This past June I spent an excellent day hanging out with Joey Ruiter, driving and discussing his Reboot Buggy project. Before heading home, I let him know that he was more than welcome to keep me abreast of whichever new automotive project he'd get into. You can never have too many car designers and one-off fabricators in your Rolodex, right?
Ruiter recently made good with the follow-up, emailing me with details on this Dodge Challenger A/T Untamed Concept that pushes a lot of hot buttons for the muscle car and off-roading enthusiasts.
This all-terrain Mopar is a lot more than a Challenger body dropped on a truck chassis, too. A materialized version of the A/T would included a completely new, long-travel suspension, skid plates, body armor and rock sliders, and obviously flared fenders to help accommodate a hellacious set of off-road-ready tires. The dramatically revised underpinnings would be topped with a slick graphics package and a killer lower light bar, all making the A/T look quite cohesive in its own, radical way. And the result would be a car no longer limited to mere road-driving.