on 2040-cars

Auto blog

Dodge Charger R/T NHRA Funny Car is ready to burn rubber at SEMA [w/video]

The Dodge Charger R/T is all set to rocket down the drag strip in NHRA Funny Car competition with a completely redesigned body debuting at this year's SEMA Show. While only the front decal, side scallops and rear logo really signal this racer as a Charger, that doesn't take away from its promise of hitting absolutely ludicrous speeds.
The engineers' biggest tweak to the body was moving the cockpit further back. This created more clearance under the hood, and the change came with added advantage of giving the driver better visibility out of the car. Composites like Kevlar also helped make the one-piece shell even lighter, while not sacrificing strength.
The new design has already undergone extensive time in the wind tunnel and real-world runs to make sure that none of the changes negatively impacted the aerodynamics. With those tests out of the way, the Charger R/T Funny Car will have the first chance to truly prove itself in NHRA competition at the 2015 Winternationals from February 5-9 at Auto Club Raceway in Pomona, CA.

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.

Chop the top of your new Dodge Viper for $35,000

We have good news, and we have bad news. First, the good: It's now possible to get a brand-new Dodge Viper roadster, which is nice, considering we're in the dead of summer and many of us like wind-in-the-hair motoring. Now, the bad: This is not a factory option from the automaker, instead coming courtesy of an aftermarket company called Prefix Performance, and that means it's going to cost you some serious coin.
Called Medusa, this drop-top Viper was created without the knowledge or consent of Dodge, but that's probably fine because Prefix works with the automaker already for the final preparation of the American supercar, including paint. According to the company, the current, fifth-gen Viper was built with a convertible version in mind, so no chassis strengthening is required. From the looks of the somewhat grainy photos available, the conversion appears of very high quality.
Want one? Well, that means you're going to need to procure a Viper - Prefix has 10 units ready for transformation as it stands - and that's going to cost at the very least $102,485. Then, you'll need to write a check for an additional $35,000 for Prefix to surgically remove the car's roof. Thing is, for that kind of cash, a prospective owner could buy, among other very nice options, a Viper hardtop and a loaded Miata, or a Corvette Stingray convertible and several pockets full of change. Or, perhaps a new Viper hardtop and a used, first-gen Viper convertible?