1998 Dodge Viper Gts-r #88 Of 100 on 2040-cars

Auto blog

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.

Dodge idles Viper production again at Conner Avenue

You've got to hand it to Dodge for having the gumption to put the original Viper into production in the first place. It was, after all, much more of an emotional decision than a practical one, and a move which saw the first production V10 engine placed in a road car - long before the advent of the Lamborghini Gallardo, Audi R8, Porsche Carrera GT or Lexus LFA, not to mention the other Ford, BMW and Volkswagen Group models that used such engines.
It's now been 22 years since the first Viper entered production and the Viper still rolls on several generations later, but we're sad to say that courageous decision has not always been met with overwhelming sales success. In fact parent Chrysler was forced to idle the Conner Avenue plant where the Viper is made back in April due to slow sales. And while production resumed again as planned on June 23, it apparently didn't do the trick.
As a result, Chrysler corporate communications chief Shawn Morgan revealed to Autoblog that the assembly line has been shut down again for another two weeks. The line was up and running for nearly two full work weeks from June 23 until the holiday weekend that started on Thursday, July 3. But instead of coming back online today as planned, it's been idled again for the weeks of July 7 and 14. That means it will be July 21, at the earliest, before the serpentine supercars start slithering down the assembly line at Conner Avenue again. Once it does, however, production is set to resume at the same pace it was before the shutdown.

Coal-rolling Ram dually does tandem beer-shooting burnout with ATV in bed

Sometimes a video comes around that just makes you shake your head in disbelief. Take for example these guys from Nebraska in their dually diesel flatbed Ram, doing a smoky burnout. Lighting up the tires is nothing new, but these folks take things a step further by having another guy on an ATV in bed that is also smoking the tires. Finally, people are sitting on a couch in the bed taking the whole show in, as beer cans shoot out of the stacks.
There have been several stories recently about the scourge of rolling coal, i.e., diesel trucks modified to lay down a thick, black smoke screen, sometimes for vaguely political reasons. Whatever your opinion is on it, breathing in this much nasty stuff isn't exactly great for your health. Of course, it turns out that burning rubber is pretty awful, too. Both diesel and tire emissions contain cancer-causing Group 1 carcinogens. Combine them with the cigarette smoking here, and these guys are an oncologist's nightmare. Scroll down to take it all in for yourself. Warning, there is a little explicit language.