Find or Sell Used Cars, Trucks, and SUVs in USA

1989 Ford Bronco, 302, 6" Lift, Only 15k Miles Since Frame Off Restoration on 2040-cars

Year:1989 Mileage:15050
Location:

Hahira, Georgia, United States

Hahira, Georgia, United States

Bought this truck about 5 years ago, a complete basket case. Wiring harness was completely, burnt, spliced, hacked, etc., throttle body and intake was completely shot, the dash guages and components were disconnected, no way of telling mileage, water temp, pressures, etc. Bought it to do a frame off restoration with my son, who was 13 at the time. Took a couple of years and about $16,000, but made a nice truck for him to drive to high school. He's graduated now and going off to college, so we are going to sell this truck and get him something smaller and more economical.

We completely disassembled the truck, had the engine and transmission professionally rebuilt, since the engine bay was in such bad shape we stripped all the wiring/electronics/throttle body and went with a new painless wire harness and Holley 600 cfm carbuerator, stripped, pressure washed and re-painted the frame, installed a 6" skyjacker suspension lift, new wheels and tires, new paint, billet grill, KC off-road lights on front brush guard, new carpet and new Auto Meter mechanical guages.

 

Specifics and Particulars on rebuilds:

 

Engine 302 C.I.D.:

  • Rebuilt by Knico engines in Moultrie, GA.
  • bored .030" over
  • 351 W cam, everything else stock
  • Edelbrock aluminum dual plane intake manifold
  • Holley 600 cfl 4 bbl carb
  • MSD billet distributor
  • MSD Street Fighter electronic ignition box
  • MSD Blaster II coil
  • Hooker headers w/ 2 1/2" dual exhaust
  • Edelbrock valve covers and air breather

Transmission C6 automatic:

  • Rebuilt to stock spec by local shop Valdosta, GA

Suspension/Tires:

  • Skyjacker 6" suspension lift
  • New re-arched springs
  • New shocks w/boots, dual shocks up front
  • Steering Stabilizer
  • All new hardware/brackets etc.
  • 15" x 10" Eagle alloy wheels
  • 35" x 12.5" Mickey Thompson Baja Claw Radial tires

Fuel System:

  • New fuel tank
  • new pickup pump/sending unit in tank
  • new fuel pump on frame rail with on/off switch in cab
  • new fuel pressure regulator
  • new fuel lines
  • new fuel filter

This truck is a steal for the minimum asking price. There is only 15,000 miles since the rebuild, most parts on this truck are new. There are a few issues that need to be addressed: The trim around the windshield is missing, the A/C is not hooked up, reverse lights do not work, some interior trim pieces are missing, small dent in drivers door, some knicks and scratches here and there, ignition switch on steering column is loose (new summit racing steering column), small items that were set aside when my son started driving and were forgot about. This truck just needs a good cleaning and some TLC. I must apologize for my son, we have been getting alot of rain and we live on a dirt road, that somewhat explains the dirty engine bay and undercarraige. If you have any questions, please feel free to ask. Truck is being sold as is, where is, with no warranties expressed or implied.

 

 

 

Auto Services in Georgia

ZBest Cars ★★★★★

New Car Dealers, Used Car Dealers, New Truck Dealers
Address: 3280 Commerce Ave, Roswell
Phone: (888) 862-8501

Woods Automotive ★★★★★

Auto Repair & Service, Brake Repair, Tire Dealers
Address: 2644 Houston Ave, Dry-Branch
Phone: (478) 745-2624

Wellington Auto Sales ★★★★★

New Car Dealers, Used Car Dealers
Address: 395 Brennan Rd, Fort-Benning
Phone: (706) 507-0375

Volvotista ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 478 Northdale Rd Ste 103, Buford
Phone: (678) 682-3063

US Auto Sales - Covington ★★★★★

Used Car Dealers, Financing Services
Address: 3192 Emory St NW, Porterdale
Phone: (888) 558-0754

US Auto Sales ★★★★★

Used Car Dealers, Financing Services
Address: 1590 Monroe Drive Gainesville, Pendergrass
Phone: (678) 450-0400

Auto blog

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

Mon, 08 Jul 2013

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.

Ford, Renault, VW shareholder oppose French aid for PSA/Peugeot-Citro"en

Mon, 29 Oct 2012

Pots and kettles, glass houses and stones - that's a little of what we appear to have going on in the European car market. New reports say that that three European automakers have registered their opposition to a loan deal that PSA/Peugeot-Citroën is working on with the French government. Peugeot's finance arm, Banque PSA Finance, is struggling with its debts and has been downgraded by Moody's to its lowest investment-grade classification, one step above junk. This makes it more expensive for a potential buyer to finance a car through Peugeot. The last thing Peugeot needs is more difficulty selling cars in the tough European market, and the situation will only worsen if the bank's credit worthiness takes another hit.
A deal being worked on would have the French government offer €7 billion ($9B U.S.) in bonds to guarantee the bank's loans, which would give the institution some breathing room to manage its debts and lower its interest rates. Outside of that, a group of banks would provide other, non-guaranteed loans to the bank to further help its position. In exchange for state help, though, the government wants seats on Peugeot's board for worker representatives and a government liaison, along with factory and worker guarantees. The Peugeot family would maintain control of the company.
So what we have is government assistance being provided to a car company's finance arm, akin to the way General Motors' GMAC (now Ally Financial) and Chrysler Financial got help in their time of need. What we also have is Ford and Renault, and Germany's State of Lower Saxony, the second-largest shareholder in Volkswagen, voicing their concern about the proposal, because they say it could create an unfair competitive advantage for Peugeot. Everyone in Europe's down market is fighting for every sale, and if Peugeot gets help to keep its auto loan costs down, it figures to help buyers choose Peugeot or Citroën.

Ex-GM VP LaNeve takes over Lincoln ad agency

Wed, 10 Apr 2013

Those of you that caught yesterday's op-ed about Lincoln will have heard already, but Mark LaNeve has taken the helm at Team Detroit. Once the North American vice president of sales, service and marketing for General Motors, LaNeve will now head up the agency that handles all of Ford advertising. LaNeve will also run the account for Lincoln. While at GM from 2001 to 2009, the exec oversaw ad campaigns like Cadillac's Breakthrough and sales initiatives like "Employee Pricing for Everyone."
He left in 2009 to join Allstate as chief marketing officer, oversaw the creation of the Mayhem ad spots and was moved into the role of VP of agency operations overseeing Allstate's 10,000 agents. He resigned from the insurer in February 2012 for personal reasons and joined Team Detroit in August 2012 as chief operating officer, in charge of satellite offices in New York and internationally. He replaces ex-CEO Cameron McNaughton, and will continue to hold the title of COO.
Lincoln is trying to get its 2013 back to rights after putting big dollar commercials for the 2013 MKZ on television then having production glitches preventing cars from getting to dealerships. With rumors of a relaunch in the works, it's no surprise LaNeve has been given the reins - and from here it looks like the brand is desperate for the kind of magic he's proved he can marshal. Perhaps he can start by calling a mulligan on the renaming exercise that gave us the hoary "Lincoln Motor Company" and go back to oh, say, "Lincoln." Then he can ask the product folks to get to work on the MKC concept...