2002 Ford Excursion 7.3l Diesel 4x4 Leather Very Clean Limited on 2040-cars

Auto blog

NHTSA investigating 725k Ford, Mercury vehicles for stalling issue

Owners of Ford Escape, Mercury Mariner, Ford Fusion and Mercury Milan models, listen up. According to a report on Automotive News, the National Highway Traffic Safety Administration has opened an investigation into these four vehicles totaling an estimated 725,000 units. The investigation appears to center around a malfunctioning throttle body on non-hybrid models of the 2005-2012 Escape and 2011-2012 Fusion. With Mercury dying off after the 2011 model year, this probe will also apply to the 2005 through 2011 Mariner and the 2011 Milan. There has been some discussion around the Escape stalling issue for some time now, but this investigation appears to be larger in scope than before.
Though not a recall yet, NHTSA's Office of Defects Investigation (ODI) has received 123 complaints of stalling or surging vehicles, while Ford itself has logged 1,472 complaints. The investigation report, which is posted below, seems to indicate that a faulty circuit board for the throttle body could cause the vehicle to go into limp mode, which, according to NHTSA, could cause complaints of both stalling and surging.

Hyundai, BMW and Ford win Concept Vehicle of the Year awards

More than two dozen jurors started with a pool of 23 concept cars introduced at the most recent Los Angeles, Detroit, Chicago, Toronto and New York auto shows, then pared it down to three winners in three categories for the twelfth annual North American Concept Vehicle of the Year Awards. The trophy-bearers are said to be those "vehicles most likely to shape the future of the automobile industry," and lead their classes in the Concept Car, Concept Truck and Production Preview divisions.
Hyundai had two cars as finalists for the Concept Car category, the competition boiled down to the Hyundai HCD-14 Genesis concept, Veloster C3 Roll Top, Honda EV-STER and the Toyota Corolla Furia. It won with the HCD-14 Genesis that was introduced at the Detroit Auto Show, a sharp sedan that sharply divided opinion between those who thought it was too much, those who thought it was too much Audi A7, and those who thought it was perfect. The award panel's judges, however, thought so much of it that it's got two awards in one sitting, not only taking concept car honors, but because it earned the highest overall score in the competition it also takes the crown for Most Significant Concept Vehicle of 2013.
The final selection in the Concept Truck category was down to the Ford Atlas, Kia Cross GT, Nissan Resonance and Volkswagen Cross Blue. The Ford Atlas took the silverware, after also winning the Eyes on Design award - shared with the Nissan Resonance - at the Detroit Auto Show where it was introduced.

How Ford plans to handle insurance and repair questions surrounding new aluminum-bodied F-150

Building a car out of aluminum has a number of benefits - the lighter weight allows the vehicle to be more agile, more fuel efficient, make better use of its power and be more resistant to dings and dents. The downside to the advanced construction, though, is that repairs are both challenging and expensive. That's troubling for the new, aluminum-bodied Ford F-150, because it's kind of made a name for itself as a rugged, durable work vehicle.
How will the legions of Ford buyers cope when it comes time to insure and repair their new trucks? Well, according to Ford, it's expecting a ten-percent jump in insurance costs for the aluminum-bodied F-150, although Ford's truck marketing manager, Doug Scott, was quick to point out that the F-150 is generally cheaper to insure than its competition from Ram and General Motors. "At the end of the day, that's sort of a wash," Scott told Automotive News at last week's Detroit Auto Show. "We've spent a lot of time and feel very comfortable that that's not going to be an inhibitor."
The other issue facing Ford is the distinct lack of body shops that have the training or equipment to repair aluminum-bodied vehicles. AN cites an estimate from the Automotive Service Association claiming that of the 30,000 independent body shops in the US, less than 10 percent are able to work on aluminum.