1973 F-100 Pickup 2wd 2-tone Rebuilt 360 & C-6 Transmission Matching Numbers on 2040-cars

Auto blog

This is what a 3D-printed liquid metal Ford Torino looks like

Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.

Jay Leno's Garage goes eco with Ricardo HyBoost

"Now before you turn away, this is not another boring hybrid car thing..." Despite the slightly defensive introduction from Jay, the latest episode of Jay Leno's Garage is actually pretty fascinating. The Ricardo HyBoost is a 2009 Ford Focus that has had a 1.1-liter engine swapped in for the stock 2.0-liter four. That might not get you performance enthusiasts out there fired up, until, that is, you hear that the 1.1L is also fed by both a turbocharger and an electrically driven supercharger for an instant-on "torque-fill" effect. Sounds about right, considering that Ricardo engineering is part of the genius behind the McLaren P1.
Perhaps most exciting of all, the Ricardo folks say that the package should run somewhere in the neighborhood of $1,100. A sort of performance-hybrid that makes sense for the frugal driver and the enthusiast one, then. There's a lot more to the HyBoost, all of which can be seen in the video below.

2015 Ford F-150 shaves 700 pounds, adds 2.7-liter EcoBoost [w/video]

The Ford F-150 is one of the best selling vehicles on the planet. Considering that, one can imagine that when it comes time for a redesign, there are hardly any half measures. For its lucky thirteenth generation, Ford has gone all-in on the single most important vehicle in its portfolio, redesigning it from the ground up.
The big news is the F-150's new, lightweight, Atlas-inspired body. Ninety-three percent of that new body is made from a sort of aluminum alloy not unlike what the US military uses in its M2 Bradley fighting vehicles and Humvees, and it accounts for up to 70 percent of the F-150's 700-pound weight reduction. As a side benefit, the aluminum body should prove more resistant to dents and dings. Built Ford tough, indeed.
If you're wondering where the other 30 percent of that 700-pound weight loss went, 8.5 percent (60 pounds) came from the increased use of high-strength steel (up from 23 percent to 77 percent) in its ladder-box frame. Ford claims this steel is comparable to some of the heavy duty pickups used by its competitors, with a PSI rating of 70,000.