2004 Ford F-150 Fx4 Extended Cab Pickup 4-door 5.4l on 2040-cars

Auto blog

2015 Ford Focus Electric hides in plain sight

The styling changes to the 2015 Ford Focus were shown off at the recent Geneva Motor Show, so what the EV version looks like is not that much of a surprise. Still, the 2015 Focus Electric is making its world debut here at the New York Auto Show, so we wanted to know what changes we are looking at compared to both the internal combustion engine version and the earlier EV models.
The exterior visual distinctions between the ICE and EV are minimal, and basically nonexistent from the A-pillar to the rear. Up front, you can see the charge port, of course, but the front fascia has also undergone a bit of an adjustment. The front doesn't have the ICE version's flattened grille and the EV's Ford logo creates a bump in the hood line where none exists on the ICE. The 2015's grille is also different than the one on the 2014 Focus Electric, being slightly smaller (you can see this better if you compare pictures in our new gallery above to these of the 2011 Focus Electric and these of the gas-powered 2015 Focus).
The updated 2015 interior - which we couldn't access ourselves - has things like a new center stack, improved cupholders and is basically identical between the gas and electric models. With the car off, you can't even tell if you're in an EV or ICE, Seema Bardwaj, the US brand manager for the Focus, told AutoblogGreen. The only things that are different, she said, are extra menu screens to show EV powertrain information to the driver.

3dCarbon now offering body kit for Ford Fusion

A factory-backed body kit by 3dCarbon is now available to Ford Fusion owners who want their car to stand out from the crowd while not being too flashy. The body kit adds a more aggressive front spoiler, side skirts, rear body trim and spoiler that are, in fact, integrated quite nicely into the Fusion's already-comely styling, just as 3dCarbon claims. All Fusions with the kit also receive dual exhaust ports with the stainless-steel exhaust surrounds usually reserved for the Titanium package Fusion EcoBoost models.
A nice detail of 3dCarbon's injection-molded urethane body kit is that it has undergone crash testing to certify that it can withstand crashes up to five miles per hour. Because of this, the kit is warrantied by 3dCarbon for five years or 50,000 miles, much like Ford's warranty on its own parts. In fact, the kit is available through participating Ford dealers and can be financed through Ford Motor Credit. Buyers can purchase the kit - pre-painted or unpainted - and install it themselves, or it can be purchased with a new Ford Fusion and installed at the dealer, pre-painted to factory specifications. Of course, it can also be ordered directly from the source. Take a look at the press release below for more detailed information on the body kit, and let us know what you think of it in Comments.

Ford Q3 pretax profits drop to $1.18B

Following positive third quarter financial results recently from General Motors, rival Ford took a tumble in Q3. The automaker posted pre-tax profits of $1.18 billion, compared to about $2.59 billion in Q3 2013, a drop of around 54 percent. Net income also suffered with $835 million made in the quarter, versus $1.272 billion last year, a decline of about 34 percent. The Blue Oval blamed the gloomy figures on three reasons in its release: "lower volume, higher warranty costs and adverse balance sheet exchange effects."
There were problems of one kind or another in practically every region. North America experienced higher warranty costs than expected, partially due to recalls. The sales volume for the quarter was 665,000 units, versus 725,000 in Q3 2013, and pre-tax results amounted to $1.41 billion versus $2.296 billion last year.
South America and Europe both posted worse pre-tax results than last year. On the bright side, European volume was up slightly to 321,000 vehicles, from 303,000 in Q3 2013. The Middle East and Africa also lost $15 million, but that was an improvement compared to the $25 million loss previously experienced in this region.