Ford F150 Raptor,svt. 4x4 Clean 1,300 Miles, Black On Black, Sunroof on 2040-cars

Auto blog

2015 Ford F-150 enters production

Ford has given the F-150 a dramatic makeover for 2015, switching to an aluminum body that helps reduce weight by about 700 pounds. Because the truck is dramatically different, Ford also had to change the way it makes the F-150, so we went inside its sprawling factory in Dearborn, MI, this week to see the Blue Oval's new manufacturing techniques in action.
The company has added 850 jobs at the site and upgraded its stamping and tool and die facilities. The body shop is also modernized, and it has been fitted with 500 new robots that join the structures together. The first 2015 F-150 rolled off the line on Tuesday, and the trucks will begin arriving in dealerships in December. Get a closer look at the F-150's unique assembly process in our video.

Ford Fiesta 1.0L EcoBoost sales robust in early going

Okay, okay, okay, so I was just a smidge wrong. Those that read my review of the Ford Fiesta with the new 1.0-liter, EcoBoost engine will know that while I really enjoyed the torquey little three-cylinder, I was concerned that Ford's decision to force 1.0-liter owners into a manual transmission, steel wheels and one trim level might hurt sales of the new engine. I was also concerned that the promised 45-mile-per-gallon highway rating wouldn't be enough to tempt buyers into trying an engine that's so far outside of what the general public is use to. My concerns, though, seem to have been for naught.
While not doing a booming business on the triple-equipped Fiesta, Ford is seeing a take rate of four to eight percent per month in the engine's first few months on sale. Now, four to eight percent might not sound like a lot - if, like last year, the Fiesta sells around 71,000 units, there'd be barely 5,600 1.0-liter models on the road. It is also small potatoes relative to the take rate on EcoBoost-equipped vehicles across the Ford range, which US sales analyst Erich Merkle estimates to be roughly 35 to 40 percent of retail sales. Still, according to The Detroit News, the 1.0-liter is getting adopted at roughly the same rate as the sparkling Fiesta ST, which should be a solid indication of just how well this little engine is doing.
The 1.0-liter's success "really speaks volumes, not just to what we're doing with the Fiesta, but with EcoBoost in general," Merkle told Autoblog.

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.