Find or Sell Used Cars, Trucks, and SUVs in USA

1988 Ford F-250 Xlt Lariat Standard Cab Pickup 2-door 7.5l on 2040-cars

Year:1988 Mileage:104000 Color: Blue/White /
 Blue
Location:

Benson, Arizona, United States

Benson, Arizona, United States
Transmission:Automatic
Body Type:Standard Cab Pickup
Vehicle Title:Clear
Engine:7.5L 460Cu. In. V8 GAS OHV Naturally Aspirated
Fuel Type:GAS
VIN: 2FTHF25G3JCB48186 Year: 1988
Number of Cylinders: 8
Make: Ford
Model: F-250
Trim: XLT Lariat Standard Cab Pickup 2-Door
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows
Drive Type: RWD
Mileage: 104,000
Exterior Color: Blue/White
Interior Color: Blue
Condition: Certified pre-owned: To qualify for certified pre-owned status, vehicles must meet strict age, mileage, and inspection requirements established by their manufacturers. Certified pre-owned cars are often sold with warranty, financing and roadside assistance options similar to their new counterparts. See the seller's listing for full details. ... 

This is a very nice Ford 3/4 ton long bed truck.  I have owned it for a little over 6 years and it's been a great truck.  It has new tires and brakes with new hardware and cylinders on back.  The mileage is actual just turning over 104,000.  The interior is very nice for the year has a little wear on the drivers side.  It has receiver hitch and duel gas tanks with brake control.  Tilt steering, with power locks and windows.  This has the tow package and it is geared low for towing.  It's the truck you want to tow anything up a hill or mountain with ease.  It has a cracked windshield and you can see the hood needs sanded and paint.  There are a few minor dings very little signs of rust.  Still a very sharp looking truck.  I really hate to sell this truck if I didn't need the money it wouldn't be on Ebay!

Auto Services in Arizona

Tri-City Towing ★★★★★

Auto Repair & Service, Automotive Roadside Service, Towing
Address: 751 E Aspen St, Peeples-Valley
Phone: (866) 595-6470

T & R upholstery & Body Works ★★★★★

Automobile Body Repairing & Painting, Automobile Seat Covers, Tops & Upholstery, Draperies, Curtains & Window Treatments
Address: 3880 Andy Devine, Kingman
Phone: (928) 757-7700

Super Discount Transmissions ★★★★★

Auto Repair & Service, Auto Transmission
Address: 3220 E McDowell Rd, Phoenix
Phone: (602) 273-6431

Stamps Auto ★★★★★

Automobile Parts & Supplies, Automobile Accessories, Battery Supplies
Address: 9123 E Southern Ave, Apache-Jct
Phone: (480) 986-3602

Solar Ray Auto Glass Repair ★★★★★

Auto Repair & Service, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: 3370 N Hayden Rd, Paradise-Valley
Phone: (480) 648-2022

Sierra Toyota ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 2596 E Fry Blvd, Sierra-Vista
Phone: (877) 245-9461

Auto blog

Ford trademarking 'Mach 1,' possibly for Mustang

Thu, 24 Oct 2013

A legendary name might be accompanying the redesigned, 2015 Mustang when it finally makes its world debut - Mach 1. Stumbled upon by the team at Ford Authority, the Mach 1 title was found in a trademark filing with the US Patent and Trademark Office, and would revive a name last used on the fourth-generation, 2003 Mustang.
While the the 2003 vintage was well and good, the Mach 1 is really remembered for a three-year run from 1969 to 1971 - it's best to just forget the emissions-choked 1972 to 1978 Mach 1s - when power output ranged from a modest 250 horsepower with the two-barrel, 351-cubic-inch Windsor V8 to "375 hp" (actual output was rumored to be well north of 400 horsepower) with the righteous, 429-cubic-inch Super Cobra Jet V8.
What does the title hold for the sixth-generation Mustang? It's tough to say. The fanatics at Ford Authority seem to think Mach 1 could take the place of the Shelby GT500 at the top of the Mustang hierarchy, which sounds like a valid argument. At the same time, we could see the SVT Cobra moniker returning for the flagship model, and the Mach 1 doing battle with the Chevrolet Camaro Z/28 (unless the Boss 302 were to return). Confounding things is the historical precedent - the Mach 1 was responsible for the death of the Mustang GT in 1969, so it might make sense as a volume performance model.

Does the new 2015 Ford Mustang have a burnout control system?

Tue, 10 Dec 2013

Whether it's lane departure warning, blind-spot monitoring or automatic emergency braking, most of the electronic systems we see emerging on new vehicles focus on safety. But there are some there just for enthusiasts. We're talking about systems like automatic throttle blipping for perfect downshifts, or launch control to get that textbook acceleration from a standstill. But the latest system could prove just the opposite of the latter.
Although it has given us most of the details, Ford is still keeping certain elements of its new Mustang secret. But emerging reports may have the skinny on one system which Ford is trying is darnedest to keep under its hat for the time being. That, according to unnamed sources cited by Motor Authority, is burnout control.
The system is reportedly designed to help novices execute the perfect smokey burnout - sort of like launch control, but specifically the opposite. The system could, according to elaborative speculation, lock the front brakes while spooling up the engine to optimal revolutions before dumping (or indicating the driver to do dump) the clutch. A cloud of tire smoke and a long pair of skid marks would then ensue.

Ford rethinking vehicle launch strategy

Tue, 07 May 2013

With a new boss at the helm, Ford is looking at new ways to improve its vehicle launches in North America to prevent recent issues that have popped up with models like the Lincoln MKZ, Ford Escape and Ford Fusion. Speaking with Automotive News, Ford's new president of the Americas, Joe Hinrichs, revealed a few ways the automaker plans to avoid early build issues such as the engine fires on certain 2013 Escape and Fusion models and months-long delays for customers to receive their MKZs.
It sounds like the root of the problems may have been Ford's relationship with suppliers compounded by the fact that the product surge came on the heels of the recent industry-crippling recession, and in the AN article, Hinrichs says improvements are being made to reduce problems during the launch of new or redesigned models. Three such improvements that were implemented during the first quarter of this year including more rigorous quality comparisons, better use of computer technology to catch major problems sooner and hiring engineers to work closer with suppliers.