1996 Ford F250 Xlt 4wd W/ 460 on 2040-cars
Hollywood, Maryland, United States
For auction: 1996 Ford F250 XLT with 4WD and a fuel injected 460. It is a pretty basic work truck, but has power windows, power locks, cruise control (inop), AC (inop) The truck runs and drives fine, but it has all the issues that should be expected with a vehicle of this age. This truck has its fair share of rust underneath. The front main seal leaks, but not bad enough for me to need to add oil between changes. The front u-joints need to be replaced, but that just keeps me from using the 4WD. The seat sags on the driver's side. I have never gotten the cruise control to work. Driver's door sags and needs replacement hinge pins. Tires are in reasonable shape. I have enjoyed the truck. Obviously, I did not have to drive it much (40k miles over 12 years), but it has been a workhorse when I needed it to be. I finally broke down and bought a new truck, so I don't need this one anymore. I may be able to deliver within 50 miles for an extra $100, but you must contact me to coordinate this before auction close. |
Ford F-250 for Sale
- 2012 ford f-250 lariat crew fx4 4x4 diesel nav rear cam texas direct auto(US $44,780.00)
- Black leather remote start back up cam heated sunroof microsoft sync xd wheels(US $37,992.00)
- Ford f250 4x4 long bed extended cab
- 1997 ford f-250 power stroke diesel 7.3 liter(US $4,500.00)
- 4 door truck, diesel, 7.3 powerstroke, stock, short bed(US $9,800.00)
- 2001 ford f250 7.3l diesel lifted crew 4x4 xlt long bed low mile very clean!!!(US $16,900.00)
Auto Services in Maryland
XDealerTechs ★★★★★
Will`s Road Service & 24-HR Towing Incorporated ★★★★★
Standard Auto Parts ★★★★★
Salisbury Towing ★★★★★
Razz-Auto Shop ★★★★★
Paul`s Tire Inc ★★★★★
Auto blog
2015 F-150 launch to curb Ford profits?
Thu, 30 Jan 2014Ford is making a big bet on aluminum with its new 2015 F-150, and it's possible that the decision will hurt the company financially, at least in the short term. After earning a record $8.6 billion in 2013, the Blue Oval does not expect to set another record in 2014. According to Automotive News, that's "largely attributable to F Series," says Bob Shanks, Ford's Chief Financial Officer.
To retool for the new F-150, Ford will idle its Dearborn Truck Plant in Michigan for 11 weeks and the Ford Kansas City Assembly Plant in Missouri for 2 weeks. "3 of the 13 overall weeks occur during what normally is our summer shutdown timeframe," said Mike Levine, Ford Trucks Communication Manager, in an email to Autoblog. The extra 10 weeks will be preparing for the more aluminum-intensive construction for the trucks and will mean over 2 months of no F-150s being made. For comparison's sake, Chrysler boss Sergio Marchionne just confirmed that the 200 plant in Sterling Heights, MI will be down for 30 days to retool for the new model, but obviously there are many more F-150 production variables than for the midsize sedan.
Levine notes that Ford is already running three shifts at both plants, and says the automaker has plans to ensure that there is adequate supply of the full-size pickups during the retooling process. The company does not want to suffer a shortage of the vehicle that accounted for 31-percent of its 2013 US sales and an even bigger percentage of its profits.
Ford Mustang GT350 drops some camo
Mon, 03 Feb 2014Now that we've poured over the 2015 Ford Mustang in its standard form, it's time to look ahead. We already knew (and heard - literally) that Ford was working on a higher-performance version of its 'Stang to replace the Shelby GT500, and earlier reports have stated that it will simply be called the GT350.
We don't have a ton of detail to go on, but this latest set of spy photos clearly shows a hood-mounted air scoop, which suggests a forced-induction powerplant is under the hood. However, this disagrees with earlier reports that the GT350 will be all motor, using a naturally aspirated engine to send massive horsepower to the rear wheels. Our spies also point out the functional vent aft of the front wheels to allow for better airflow, and the massive quad exhaust pipes can be seen, clear as day.
Expect to see the Mustang GT350 in April, when it debuts at the New York Auto Show in conjunction with the Pony's 50th anniversary. In the meantime, have a look at our gallery above to see the latest shots of the hot Mustang out testing.
This is what a 3D-printed liquid metal Ford Torino looks like
Sat, 12 Oct 2013Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.