2006 F250 on 2040-cars

Auto blog

Ford F-Series Super Duty prototype reduced to smoldering mess of aluminum and steel [UPDATE]

The most important bit of information you need to know after looking through our high-res gallery of images depicting a prototype 2016 Ford F-Series Super Duty pickup truck burning to the ground is that nobody was hurt. There were two engineers inside the vehicle when it caught fire, and both exited to safety.
That's the good news. The bad news is that the truck, which appears to have been testing in Death Valley, appears to be a total loss, minus, of course, whatever information Ford can glean from the conflagration - particularly tracing it back to its root cause. Besides that, we're also expecting the body of the next Super Duty to be hewn from aluminum, as is the case with its smaller brother, the brand-new F-150. Note the little aluminum droppings littering the roadway as apparent proof of that.
Our spy photographers report that it took just 21 minutes for the F-Series Super Duty to burn completely to the ground. The fire appears to have started in the driver-side front wheel well, spreading to engulf the entire front end in three minutes. We can't confirm the source of the blaze, but we're curious if the car's black vinyl cladding, meant to obscure the secrets within, contributed to the fire.

Experts wonder if aluminum F-150 gives Ford a real advantage

There's no doubt that Ford is taking a risk in producing the body of its upcoming new F-150 pickup truck in aluminum. What is up for debate, however, is whether aluminum was a wise risk to take in the first place. Wards Auto took the opportunity to poll some experts on the subject of aluminum versus steel in the automotive sector, with somewhat unsurprising results.
Richard Schultz, a project consultant at Ducker Worldwide, which bills itself as "a leading aluminum industry consultant (though they also deal in steels), suggests that the potential drawbacks to aluminum - higher costs, lower supply - aren't really impediments to the auto industry's increased acceptance of the lightweight metal.
Similarly, Randall Scheps, global automotive marketing director for Alcoa, a massive aluminum producer, counters claims that aluminum is less safe for vehicle occupants, suggesting that the use of aluminum can actually increase safety as it could potentially allow for larger vehicles with more crush space than steel.

Next Ford Mustang to drop 400 pounds

The Ford Mustang is already the lightest of the current crop of muscle cars, at around 3,600 pounds for a GT coupe with the six-speed manual transmission. That's almost 260 pounds less than a Chevrolet Camaro SS and about 450 pounds less than a Dodge Challenger R/T, which means the Mustang has a pretty big advantage when it comes to handling, braking, accelerating and economy. More good news: The next Mustang will be even lighter.
According to a report from Edmunds, the sixth-generation Mustang, which is set to debut at the 2014 North American International Auto Show, will shed an additional 400 pounds of body fat. That 11-percent weight reduction will be thanks to lightweight materials, with a particular focus on using stronger, but less material in construction. Aluminum will feature heavily, but Edmunds' inside source warns that there is "nothing terribly exotic" coming to the original pony car.
The other big news is that the new Mustang will be smaller overall. It's going to be 15-inches shorter than the 188.5-inch Mustang on sale today, while it'll also be 6.5 inches narrower. Shorter overhangs, both in the front and rear, are also good signs for those that want an agile Mustang.