Find or Sell Used Cars, Trucks, and SUVs in USA

7.3l Diesel F/250 4x4 Supercab Only 126,000 Miles on 2040-cars

US $17,500.00
Year:1997 Mileage:126000 Color: White /
 Gray
Location:

Cumberland, Maryland, United States

Cumberland, Maryland, United States
Transmission:Automatic
Body Type:Pickup Truck
Engine:7.3 L Diesel Turbo Intercooled
Vehicle Title:Clear
Fuel Type:Diesel
For Sale By:Private Seller
VIN: 1fthx26f5veb31330 Year: 1997
Number of Cylinders: 8
Make: Ford
Model: F-250
Trim: XLT Heavy Duty
Cab Type (For Trucks Only): Extended Cab
Drive Type: 4X4 4:10 gears
Options: 4-Wheel Drive, CD Player
Mileage: 126,000
Safety Features: Anti-Lock Brakes, Driver Airbag
Sub Model: F-350 Drivetrain Dana 60 Front Axle
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows
Exterior Color: White
Interior Color: Gray
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"1997 F-250 Power Stroke 7.3 L Diesel W/AirRide Suspension assist, fully adjustable from drivers seat, body has a couple dents, some surface rust on passenger door, but very clean truck."

Selling my 1997 F 250 Ford truck, clean truck, only 126,000 miles, the truck looks fairly stock, but has been nicely modified. Mostly I was going for creature comfort, a smoother ride on a 3/4 ton truck. Some sort of ride height adjustment, The front leaf springs tend to wear out quickly with the weight of the diesel and transfer case over them. Truck was on second set and could use help before I started, Note: the dana 50 is reliant on springs for caster and camber wheel alignment. It works good on F-150 with coil springs and a lighter motor.     First the Twin I-Beam Dana 50 removed to make room for a straight axle Dana 60 Old School Front Axle w/king pins, Rebuilt before installation, new seals and universal joints and Warn heavy duty full turn manual locking 4X4 hubs (King-Pins Axle) , Much easier maintenance then( ball joints) and no caster and camber issues. The truck has new Skyjacker Soft-Ride leaf springs. To adjust the  ride height Air-Bags were installed Front and Back. Fronts are 3" compressed to 9" fully expanded. Rated1300lbs each. Rear bags are 4" compressed and 13" fully expanded. The Front Rear has a Heavy-Duty Panhard Bar to control front stability along with 3/4 of a High Steering System, Note the Steering Link from Steering Box to Passenger side Steering Knuckle is Above the Leaf-spring. The drag-link is still below.        Rear-end has Panhard Bar to keep it in True, along with Heavy Track Bars, All Adjustable Joints are Super-Pivot type, and all joints are greasable. Rear Brakes, rear parking brake cables, and brake cylinders and drums are new, and Painted. Front Brake Calipers and Pads are New the Rotors that where on dana 60 rear when purchased, where reused. All Brake Hoses and Lines are New, including the Rear Anti-Lock Brake Actuator. Both Fuel tanks are New. Frame has had rust removed, treated with por-15 Metal Ready and has been painted whit por-15 rust paint with a brush to make sure of good contact to metal. New Skyjacker Hydro 7000 Shocks all around along with Steering Stabilizer. The Air-Bag Preesure is Controled using Two Little-Larry's Manual Control Valves, Front and Back Controlled separately. (No electric two mess with). Control Valves are Mounted in Dash with a Two- Needle Gauge just above. 2 needles in one gauge. Air suspension mainly for when truck is loaded or when pulling camper or car hauler.  Air Pressure for the system comes from a New Compressor and Two- gallon tank in the Bed Tool-Box.      Power, I wanted to open up flow of the stock motor mostly, K&N Filter and a  4" Gale Banks ( Monster)Stainless exhaust would help with that, 3" from Turbo to Cat. 4" through Monster Muffler to a 5" Polished Exhaust Tip.  Intercooler has been Added to help in Power, some parts used are Banks and some are a Kit for a Mustang intercooler, works Great! All Piping 3" Polished and the 4" Intercooler is Polished also.  Gale Banks Power-Chip is Installed on Factory Computer, along with the Banks Trans-Commander is installed for nice Trans Shifts.  Always plenty of Power,  never any Nasty Black Smoke. All Banks Gauges Installed to monitor Engine Exhaust and Transmission Temps, along with a Turbo Boost Pressure Gauge, mounted on A-Pillar and has Switch to turn off gauge lights if not needed. Truck moves out nicely, 4:10 gear ratio in rears work good with the bigger tires.    Interior: New 180 Watt per-channel  JVC sat ready Stereo has been installed along with Sony Explode Speakers front and back all installed behind factory speaker Grills to keep clean looking. Has a USB port in front for I-pod or other Music Storage Device. I have owned truck for about 5 years, I have put about 25,000 miles on truck and it has never given me any problems, even starts right up in the winter, New Starter installed also.        Truck has a few character marks (dents) on it , dent on extended cab section drivers side, top of bedside on drivers side dent and some surface rust starting on passenger door behind trim on door. Truck was Zebart Treated when it was new, they drill holes in the body and spray in rust prevention coating, and has kept the body in very good condition.   The Mickey Thomson Rims have been treated with Shark Hide, seems to be keeping rims very shinny, should be good for life, (front and back of rim).Stock Aluminum Factory Rims/ Hub Caps are available for truck, they have New 10 ply tires mounted on them, for the High Boy look. Either rims and tires go with truck, both sets for additional fee.  Truck has never been used for heavy pulling, I put a trailer hitch receiver on it when I bought it with a 100,000 miles on it. Never had one Before,  I pulled a light weight 4-wheeler trailer once in a while. The trucks undercarriage makes no noise, no squeaks, no rattles, tight ! The cab is very tight, no air leaks or wind noise. Thanks for looking, selling to continue working on other projects, My # 301-876-1007 questions about truck,  thanks Hewey.

Auto Services in Maryland

Thoroughbred Transmissions ★★★★★

Auto Repair & Service, Used Car Dealers, Automobile Parts & Supplies
Address: 11011 Scaggsville Rd, Georgetown
Phone: (301) 317-7886

Standard Auto Parts Corp ★★★★★

Automobile Parts & Supplies, Automobile Parts & Supplies-Used & Rebuilt-Wholesale & Manufacturers, Automobile Accessories
Address: 2020 Hollins Ferry Rd, Arlington
Phone: (410) 659-5400

Quickest 24/7 Ocean City Locksmith ★★★★★

Auto Repair & Service, Automotive Roadside Service, Locks & Locksmiths
Address: Snow-Hill
Phone: (443) 664-2216

Proficiency Automotive ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automotive Tune Up Service
Address: 30470 Conaway Rd, Bishopville
Phone: (302) 396-9836

Pimlico Motors ★★★★★

Used Car Dealers
Address: 6922 Liberty Rd, Gwynn-Oak
Phone: (443) 429-5020

Motion Motorcars, Inc. ★★★★★

New Car Dealers, Used Car Dealers
Address: 17273 Jefferson Davis Highway, Marbury
Phone: (703) 221-7036

Auto blog

Ford opens the doors on its Swedish rally skunkworks

Fri, 19 Sep 2014

It's always amazing to see how different kinds of racecars are made. Formula One racers are often constructed in modern architectural marvels that hint at some of the cutting-edge technology going into the racing. Conversely, rallying is all about sliding around on a varied course as fast as possible, but it often leaves a vehicle caked in mud. So it makes some sense Olsbergs MSE, or simply (OMSE) rally car shop in Nynashamn, Sweden, shows technological sophistication in a more down-to-earth setting. It builds Ford Fiesta ST racers for Global Rallycross there, and this new video gives viewers a tour through the work.
Former rally driver Andreas Eriksson runs OMSE. These days instead of racing, he and the company's 46 employees are building Ford racers from scratch. A ton of work goes into constructing each one, and according to Eriksson, it takes 400 hours to complete each body. At times, things are so busy that some of the technicians live in the shop in apartments that are on premises. There's even a restaurant to keep them fed. Sadly the dyno room is empty during this visit, though.
By the time OMSE is done, a rallycross car might resemble a Fiesta ST on the outside, but as you see in the video, it's a completely different beast underneath. Check out the work it takes to build one of them, and scroll down to read more about it in the official release.

New car market raining on convertibles' parade

Mon, 08 Jul 2013

Whether fitted with soft or hard folding lids, today's droptops are better than ever for year-round motoring. Advancements in power top mechanisms, sealing, aerodynamics, structural rigidity, rollover safety and creature comforts like heated and cooled seats mean that modern convertibles are more versatile and better to drive than ever before. Yet the segment's sales took a dive during the recession and haven't come back, Automotive News reports.
Part of that is because automakers are looking at today's more sensible buyers and simply not developing as many new models, and that lack of fresh iron is curbing sales. AN cites R.L. Polk data which notes that only about one percent of new vehicles registered in the US last year had tops that folded. Back in 2009, it was 1.4 percent, and it was 2 percent in 2006. All-in, some 151,636 convertibles were registered in 2012. That's more units more than were registered in each of the past three years, but the market has also grown as the economy has picked up speed, and as a percentage of new vehicles purchased, convertible sales are lagging.
Thus far in 2013, the Ford Mustang is America's top-selling convertible, with 6,421 units registered through the end of April, followed by its rival, the Chevrolet Camaro, at 4,751 units. The Volkswagen Beetle isn't far behind, with 4,305, but from that point, it's a steep drop off to the fourth-place Mercedes-Benz SL-Class and its 2,380 sales.

How and why Ford is rolling out Vignale in Europe

Wed, 09 Oct 2013


We know that Ford is positioning the new, upscale Vignale brand in Europe to fill a niche market of customers who want a bit more luxury, a lot more service and the same reliability and dependability that a non-Vignale Ford offers. But so far, we've been in the dark regarding how the Blue Oval will sell Vignale vehicles, how many of them will be created, and what the new sub-brand has in store for the future.
Gaetano Thorel, Ford's European marketing head, recently was interviewed by Automotive News and shared details about Ford Vignale. Thorel says, "The Vignale trim line will be priced like an ST model but attract a completely different type of customer." Specifically, he says it will attract customers in the upper 15 percent of the price band who don't want a performance-oriented ST model. He adds that Vignale cars will be about 10 percent more expensive than Titanium-trim cars. About 500 of Ford's European dealers will sell Vignale Fords, Thorel says, "in areas that make sense." The automaker expects 10 percent of its European sales to be Vignale cars, which equates to about 5 percent of its global sales. When asked if there are any other Vignale models planned beyond the Mondeo, Thorel said, "There is nothing written in stone yet."