1994 Ford Mustang Svt Cobra Coupe 2-door 5.0l on 2040-cars
Moulton, Alabama, United States
Body Type:Coupe
Engine:5.0L 302Cu. In. V8 GAS OHV Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
Number of Cylinders: 8
Make: Ford
Model: Mustang
Trim: SVT Cobra Coupe 2-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: RWD
Safety Features: Driver Airbag, Passenger Airbag
Mileage: 115,000
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows, Power Seats
Sub Model: COBRA
Exterior Color: Red
Interior Color: Black
THIS IS A ROLLING CHASIS ONLY. NO MOTOR NO TRANSMISSION.
With that out of the way this is a really nice "true" Cobra race car/street car. I purchased this car with intentions of placing an 03 Cobra set up in it but I just decided to keep my 92 Coupe car and use it instead. This car could easily be made back into a street car as none of the wiring has been cut and all of the factory harness is included. It has stock supension and maintains all of its factory interior. It does have an 8 point cage with swing out and removable door bars also removable rear cross bar. All gauges pictured in the car are included. This car at one time had been wrapped and the paint has some pitting due to the wrap. It may come out and it may not I have not tried. The paint still looks great and shine really well just wanted to mention it. Please feel free to come see this car in person before bidding. This car will make someone a very nice car. Happy bidding!!
Ford Mustang for Sale
- 2005 ford mustang convertible 4.0l
- 1997 ford mustang svt cobra 35k orig miles,supercharged,one of a kind! like new,
- 2009 ford mustang base coupe 2-door 4.0l(US $14,000.00)
- 1973 ford mustang convertible no reserve show car 351 v8 new top paint ac ps pb
- Roush mustang 427r manual torch red rare leather 08-264 stage 3 l@@k(US $28,485.00)
- 1989 mustang gt with 306 trick flow aluminum heads, bbk intake, etc.
Auto Services in Alabama
Worldpac ★★★★★
Wayne`s Auto Service ★★★★★
Waites Tire and Service Center ★★★★★
Vinnies Auto Repair ★★★★★
Vestavia Auto Service ★★★★★
Trammell Mike Body Shop ★★★★★
Auto blog
Ford Fiesta ST orders off to strong start
Fri, 17 May 2013We at Autoblog love the new little Ford Fiesta ST, and apparently, folks in Europe are pretty impressed with it, as well. According to Ford, the automaker's European arm has already logged 3,000 orders for the new hot hatch since it hit dealerships this March. The US-spec car, which will only be available as a five-door, will go on sale in the United States this summer.
What's perhaps most interesting about the Fiesta ST ordering is that the majority of customers appear to be ordering high-spec cars. According to Ford data, 60 percent of customers have opted for the leather interior with Recaro buckets, and 90 percent have selected the upgraded 17-inch wheels (seen on our test car, above). Spirit Blue has been the most popular color, commanding 27 percent of all orders. As for the technology upgrades, 19 percent of customers have ponied up for the Sony stereo with navigation.
To recap, the Fiesta ST is offered with Ford's 1.6-liter EcoBoost four-cylinder engine, putting out 179 horsepower and 177 pound-feet of torque, mated exclusively to a six-speed manual transmission. We had an absolute blast flinging the hot Fiesta through the French Alps, and we can't wait for this sharp little hatch to make its way over to the States.
Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day
Thu, 13 Feb 2014Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.
Hurricane Sandy cost automakers 15,000 vehicles, may have ruined up to 200k
Wed, 07 Nov 2012Hurricane Sandy was the largest Atlantic storm in US history, and its total economic impact is just now coming into view. According to Automotive News, Toyota, Chrysler, Nissan and Honda are set to scrap around 15,000 new vehicles ruined by the storm. Nissan alone accounts for about 40 percent of those, with 6,000 Nissan and Infiniti models deeded "un-saleable" due to damage. The company saw 56 dealerships shuttered due to the storm, but 51 of those have since reopened.
Toyota, meanwhile, had some 4,000 vehicles at its Newark port facility, and of those, 3,000 may be scrapped. An additional 825 were dealer inventory when they were ruined. Honda and Acura dealers are reportedly sending 3,440 vehicles to the salvage yard. By comparison, Chrysler weathered the storm fairly well with 825 units destroyed, while Hyundai suffered only 400 lost units and Kia scrapped around 200.
As you may recall, Fisker also suffered some losses, and Automotive News reports the manufacturer saw 320 Karma models damaged beyond repair. Ford and General Motors have yet to come up with estimates, and no automaker has commented on the full cost of replacing the vehicles.