Ford Mustang Cobra on 2040-cars

Auto blog

Ford to add more than 2,000 jobs in Kansas City

Continued high demand for the Ford F-150, along with the addition of the all-new Transit series of commercial vehicles, has led Ford to announce that it will add over 2,000 jobs at its Kansas City Assembly Plant. At the time of the announcement, the plant boasts 2,450 hourly employees working on two shifts. All told, Ford will invest $1.1 billion in the Kansas City plant to expand truck production and begin producing the Transit series.
According to the automaker, fullsize truck sales are up 19 percent through April of 2013, leading to an additional 900 workers and a third shift of production for the F-150. Production of the Transit series will begin in the fourth quarter of this year, requiring an additional 1,100 workers. In addition, Ford estimates that a total of 18,000 jobs will be created by suppliers to its Kansas City plant to support the additional vehicle production.
Want to know more? Scroll down for the complete press release.

Ford rolls out diesel Focus ST at Goodwood [w/poll]

If you're in the market for a hot hatch, there are some excellent choices at your disposal - especially if you live in Europe. But if you want a diesel, well, your choices become rather more limited. Volkswagen tends to that niche market with the Golf GTD (essentially an oil-burning version of the GTI available Stateside), but that's about the extent of it. The pleas of those looking for more diesel-burning hot hatch choices haven't fallen on deaf ears at Ford, with the Blue Oval not only rolling out a facelifted gas-powered Focus ST at the Goodwood Festival of Speed this weekend, but also a new diesel version as well.
The diesel Focus ST (which we hope and pray isn't marketed as the STD) packs a 2.0-liter turbodiesel four producing 182 horsepower and 295 pound-feet of torque to propel the oil-burning hot hatch to 62 in 8.1 seconds en route to a top speed of 135 miles per hour. With less power and only slightly more torque, that makes the diesel Focus ST considerably slower than the gasoline one, which packs 252 hp and 270 lb-ft, runs to 62 in 6.5 seconds and tops out at 154 mph, but (in a testament to how far particulate filters have come) the diesel model cuts carbon emissions by nearly a third compared to the petrol version and returns about 50-percent better fuel economy, which makes that much more of a difference in markets where diesel is already priced better than gasoline at the pump.
For buyers who wouldn't consider anything other than a diesel, it also represents 23-percent more power than the previous top-level diesel Focus. The VW Golf GTD, for reference, offers up 181 hp (just 1 horse less), 280 lb-ft (15 fewer torques) but is somehow estimated to reach 60 in a considerably fleeter 7.4 seconds.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.