Svt Cobra Built!! 600+ Hp!! on 2040-cars
Loris, South Carolina, United States
Body Type:Coupe
Engine:4.6L 281Cu. In. V8 GAS DOHC Supercharged
Vehicle Title:Rebuilt, Rebuildable & Reconstructed
For Sale By:Private Seller
Number of Cylinders: 8
Make: Ford
Model: Mustang
Trim: SVT Cobra Coupe 2-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: RWD
Options: Leather Seats, CD Player
Mileage: 35,326
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag
Exterior Color: Red
Power Options: Air Conditioning, Power Locks, Power Windows, Power Seats
Interior Color: Black
Hi there, Up for sale I have my fully built 01 SVT Cobra. This car is extremely fast and not for the faint of heart. A lot of time and money has been spent to make this car what it is. You can get in and drive it everyday it cranks up and idles perfect. All power options work, Cold A/C, Hot heat, and not a single light in the dash is on. Right off I will say that the car does have a rebuilt title due to a front end collision back in 09. The car was professionally repaired with all factory Ford parts and airbags never were deployed. Car tracks straight and has absolutely NO issues whatsoever. After the accident while the work was being done to the car a motor, gauge cluster, and full wiring harness off of a totaled out 03 Cobra with 12,000 miles was installed in the car. Anyone who knows the 03-04 Cobra's knows that they are the baddest Cobra's around. After the build the car was just driven daily for about another 12,000 miles then it went under the knife again for a complete overhaul to make it the Bad Ass machine it is today. I can promise anyone who see's this car or drives it will not be disappointed. I get compliments on the car almost every time I drive it. However since the full work over it is only driven on nice days and mainly weekends. I am only selling due to the fact just bought another car and some of the toys have to go. I am going to try an list the majority of all the work that was done to the car over the past year and a half. There has only been about 4,000 miles put on the car since the build.
Engine:
- Stage 5 ported Stegmeier blower
- Fore fuel rails
- 60 lb injectors
- Billetflow hub kit with 3.10 pulley
- Billetflow Snub Idler kit
- Metco crank pulley hub kit with 4lb pulley ring
- Thump racing belt tensioner
- 40 amp Kenne Bell Boost a Pump with wiring upgrade kit
- JLT RAI Crabon fiber intake
- Accubab polished single blade throttle body with port matched plenium
- SCT Big Air BA 2600 MAf
- Canton Power streering Res.
- Canton coolant expansion tank
- Canton intercooler coolant tank
- Afco Heat exchanger
- Bosh high output intercooler pump
- JLT oil seperator
- GEN 2 evenflow head cooling mod.
- Optima Red top battery
- Carbon fiber diversion panel
- JLT Carbon fiber coil covers
- Metco idler pulley
- SS braided lines throughout engine
- UPR Billet engine dress up kit
Exterior:
- 03-04 OEM front bumber
- 03-04 OEM side skirts
- 03-04 OEM Rear bumper
- 03-04 OEM spoiler
- 03-04 Aftermarket Fiberglass heat extractor hood
- 03-04 New headlights
- 03-04 New foglights
- Painted to match side mirrors
- SS Cobra rear bumper inserts
- UPR billet short antenna
- One piece fiberglass wiper cowl
Wheels and suspension:
- replica anniversary edition Cobra wheels 17x9 front 17x10 rear
- 275-40-17 front 315-35-17 rear (new tires)
- Front coilover suspension with Koni yellow adjustable shocks with UPR coilover kit.
- Rear Bilstein shocks with H/R lowering springs
- UPR front camber/caster plates
- MMR full tubular K-member
- MMR tubular control arms
- Steeda Bumpsteer kit with new inner tie rods.
- Drilled and slotted front rottors with Hawk pads
Exhaust:
- ARH 1-7/8' Stainless steel longtube headers
- ARH 3" off road X pipe (no cats)
- Bassani Stainless steel cat back exhaust
Transmission/Rear end:
- Built Tremec TR3650 with Cryogenic processing, thermal stabilization, and surface enhancement processing done by Liberty Gears.
- UPR Blue thunder short shift kit
- Billetflow IRS rear diff brace
- Urethane rear diff bushings
Interior:
- 03-04 Cobra pedals
- UPR billet climate control knobs
- UPR billet E-brake handle
- UPR billet headlight switch
- UPR billet shifter bezel
- MGW Cobra shift knob
- Cobra cigarette light delete
- Hilton High boost overlay in dash
- carbon fiber wrap on interior pieces
Miscellaneous:
- MRT hood struts
- 20% window tint
- Tinted third brake light
There is probably some stuff i am forgetting but that is the majority of it. If there are any questions feel free to message me or call or text me:
843-742-9294
Scott
I guarantee whoever gets this car will not be disappointed!!!
On Feb-22-13 at 19:32:56 PST, seller added the following information:Forgot to mention whoever gets the car will also get the SCT tuner for it, Some SS fornt brake lines, 01 cobra rear bumper, and side skirts, flowmaster catback exhaust, stock 01 cobra wing, and some other misc things.
Ford Mustang for Sale
- 2004 ford mustang 2dr cpe 40th anniversary 5-spd
- 1968 mustang coupe southern california survivor only 57,000 miles!
- 1989 ford mustang gt hatchback 2-door 5.0l
- 2005 ford mustang gt look alike mint condition!!
- 66 gt350 289 v8/ 2v tribute candy apple red 3spd conv.
- 1987 mustang gt convertible 5.0 blue gray automatic no reserve!
Auto Services in South Carolina
Wiley Body Shop Inc ★★★★★
Ultimate Autowerks ★★★★★
Turner`s Custom Auto Glass ★★★★★
Turner`s Custom Auto Glass ★★★★★
Team Charlotte Motor Sports ★★★★★
Steve`s Auto Repair Service ★★★★★
Auto blog
2015 Ford Mustang to offer solid-rear axle, sort of
Tue, 17 Dec 2013One of the biggest knocks against the last Ford Mustang was its solid-rear axle. Not one to actively court criticism, Ford dutifully swapped out the old-fashioned rear end for something a bit more modern in the redesigned 2015 Mustang, adding an independent rear suspension across the board.
While an IRS Mustang is great news for those that value handling and ride comfort, there's one big group that it's bad news for - drag racers. See, a solid-rear axle is a big deal for drag racers, because not only is it more durable and cheaper, but it's better for the hard launches that can make or break a race.
To satiate this vocal demographic, Ford will sell a body-in-white version of the Stang, complete with a nine-inch rear axle, that will debut at the 2014 Performance Racing Industry show. The news came from gas2.org, which cited an unnamed employee of Ford Racing at this year's PRI show.
Facelifted Ford Focus caught testing in the cold
Wed, 18 Dec 2013It's that time in the life of the Ford Focus to get a little work done - a nip-tuck here, some Botox there. Yes, Ford is testing a facelifted version of its global C-segment entry, which first hit markets in Europe and North America in May 2011.
Like the touchup on the Fiesta, expect Ford's gaping grille to make its first appearance on the Focus. Our spy photographers point out that this is likely to be a more comprehensive makeover than previous spy shots suggested, based on the additional camouflage seen here on the front and rear ends of this five-door model. New head and taillights are also likely in order, as are changes to the front and rear fascia.
The interior was also snapped and features a cleaner design with a larger central display. Other than that, it looks like some buttons have been changed, making us think most of the Focus' updates are limited to the exterior.
Ford to build Explorer in Russia to meet demand [w/video]
Fri, 12 Apr 2013The current Ford Explorer is sold in more than 64 countries, and this three-row vehicle continues to grow in popularity worldwide. To keep up with demand, Ford began producing the Explorer at Ford Sollers Elabuga Assembly Plant in Tatarstan, Russia, a joint venture facility. This partnership will build Russian-market Explorers only, and production of export vehicles not destined for Russian buyers will continue to be built at Ford's assembly plant in Chicago.
Before this plant went online, Ford would ship Explorers to Russia (and other regions around the world) as partially assembled knock-down units where final assembly would eventually take place. While there is no indication as to how many Explorers Ford Sollers will build for Russia, Ford did add that exports of the SUV were up 65 percent last year (from 2011) accounting for more than 24,000 units.
Scroll down for a press release about the Russian Explorer as well as a video (bad music and all) showing the SUV being produced in Tatarstan.