2003 Honda Accord 4d Ex 5 Speed Manual on 2040-cars

Auto blog

Acura NSX bodywork to be sheathed in zirconium e-coat, fewer paint layers

Automakers make halo cars to drum up excitement and show off what they can do, but there's more to it than that. Advanced platforms allow a company's engineers to experiment with all sorts of technologies. And in the case of the upcoming new Acura NSX, that includes new paint processes.
Speaking with Autoline in this video interview, Honda's North American Senior VP Jon Minto talked about an innovative zirconium e-coat which it's applying to the new NSX. Unlike some experimental paints developed for Formula One, however, this coating is not designed to minimize drag or enhance cooling: it's designed to be more environmentally friendly.
It's one of a few measures which Honda is implementing on the NSX before expanding it to more accessible models, along with another process that uses fewer coats to reduce energy consumption by 40 percent. Watch the interview with Autoline host John McElroy right here.

2014 Honda HPD CR-Z

Honda invited us to its Southern California North American headquarters last week to take a spin in a very special CR-Z - one modified with a full complement of Honda Performance Development (HPD) components. While the company has been racing with HPD parts for years, this is the first time the automaker has offered them for its street-legal vehicles, and it has chosen this year's SEMA Show in Las Vegas to be the launch venue. Last year, Honda introduced the HPD Supercharged CR-Z Concept at SEMA - this is the slightly modified production version.
The complete transformation gives the normally placid hybrid hatchback a serious shot of adrenaline thanks to a bolt-on supercharger combined with suspension, tire, brake and exhaust upgrades. In addition to the blower (detailed in a bullet point below), new HPD suspension components lower the car by about half an inch, and firmer spring rates stiffen the ride. Stock 16- or 17-inch wheels are then replaced with HPD 18-inch alloys wrapped in sticky Michelin Pilot Super Sport tires (215/40ZR18 at all corners). The clutch is upgraded, a limited-slip differential is installed and new HPD monobloc four-piston calipers are fitted over slotted and ventilated iron rotors up front (the single-pistons over solid discs on the back axle are unchanged). In the rear, the stock hidden single exhaust pipe is replaced by a free-flow twin-tip exhaust that peers out of a new HPD lower diffuser. Other cosmetic enhancements include an HPD front lip spoiler, rear deck lid spoiler and an HPD emblem kit for each side. To say the CR-Z is transformed by the complete HPD package is an understatement.
Driving Notes

Honda unveils new 3.5-liter racing engine

Honda is following Ford's lead and debuting the second twin-turbocharged V6 to be used by Daytona Prototypes in the United Sports Car Championship. The wait won't be long to see it on track because the new engine will debut with the Starworks Motorsport team in a Riley Gen3 prototype chassis at the 12 Hours of Sebring from March 12-15.
The new HR35TT engine is based on Honda's J35 production V6 found in a variety of its models, including the current Accord. The racing version benefits from dry sump lubrication, but is still similar to the production version with an aluminum block, direct injection and single overhead camshafts. It is fueled by 100-octane E10 fuel, but like many racing engines, exact power figures have not been released.
Starworks has had a close relationship with Honda since it won the LMP2 class at the 24 Hours of Le Mans and in the FIA World Endurance Championship in 2012 with a Honda Performance Development ARX-03b chassis and Honda engine. We can't wait to see this new mill hit the track, and see how it fairs against Chip Ganassi Racing's EcoBoost-powered Riley. Scroll down to read the press release for the full details.