Find or Sell Used Cars, Trucks, and SUVs in USA

2011 Honda Accord Ex-l Coupe Manual V6 Fully Loaded Bagged on 2040-cars

US $21,500.00
Year:2011 Mileage:39000
Location:

Palos Hills, Illinois, United States

Palos Hills, Illinois, United States

So it's time to sell my show car for something else this car is really reliable on gas as a daily commute. I daily this car and never had one issue since owning it. It comes with all the options Honda offers with this car. This includes: Navigation, Sirus XM Radio, Illuminated floors lighting, 6 speed manual transmission, Heated Leather Seats, Moon/Sun Roof, Memory Seats, Power Seats, Fog Lights, Bluetooth, Usb/Aux capability, HFP Kit, & much more!

I purchased a little while ago and done a lot of upgrading on it. All upgrades have been done at one time and the parts on the car have little less then 2 months old, never seen snow. I purchased it which it was a little rear-end damage replaced the bumper and taillight, there was no quarter damage or anything just a little minor rear-end. So due to that fact, it comes with a rebuilt title, still fully capable or being insured and everything like a normal car just cheaper. I am known on the south-side for my experience and helping people out with their vehicles, so you definitely can buy this with confidence,
The car just reached 39k miles and still feels like new. Only have used Synthetic oil, and high performance oil filters.

If you wish to see it, shoot me a simple text.
1708-four1five-7six5nine


Here's a video: http://www.youtube.com/watch?v=VNXa10kjZNk


Car comes with all stock parts &:
Modifications this car has:
- J-Power Camber Kit
- Rear HFP Kit
- Front HFP Kit
- Carbon Trunk
- Carbon Wrapped v6 Trunk Wing
- 20% Tinted Windows
- Kenwood Interior Speakers 350Watts
- Custom Evo 8/9 Side Splitters
- Custom 05 Sti Front Lip
- HIDS w/ The G4 Ballasts (Headlights & Fogs)
- All Interior LEDS done
- Air Force Air Struts
- Airlift V2 Management 
- Dual Compressor w/ Water Traps 
- 5gal Tank Painted Copper 
- Spiked Tuner Lugs 
- K&N Short Ram Intake
- Custom Exhaust with 4" Outlets
- 2 Alpine 10" Subs With A 350z Box 
- 1000 Watt Kenwood Amp w/ Capacitor
- BBS LM Reps 20x9 Front & 20x10.5 Rear Rims

I'm asking $21,500 with EVERYTHING!

I can sell the car separate from the wheels, 
so we can negotiate a little on the price!

Auto Services in Illinois

Wheels of Chicago ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 2669 N Cicero Ave, Berwyn
Phone: (773) 292-6200

Vern`s Auto Repair ★★★★★

Auto Repair & Service, Brake Repair, Tire Changing Equipment
Address: 1645 N Grand Ave E, Richland
Phone: (217) 525-2837

Transmissions To Go ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Transmission
Address: 3609 Market Pl, Maeystown
Phone: (636) 238-3861

Transmatic Transmission Specialists ★★★★★

Auto Repair & Service, Auto Transmission, Carburetors
Address: 5210 S Il Route 31, Carpentersville
Phone: (815) 900-7278

Total Auto Glass ★★★★★

Auto Repair & Service, Windshield Repair, Glass-Auto, Plate, Window, Etc
Address: 1151 N US Highway 67, Granite-City
Phone: (314) 667-4548

Sunderland Automotive ★★★★★

Auto Repair & Service
Address: 29622 E Manito Rd, Pekin
Phone: (309) 968-1339

Auto blog

Ugly Moto makes beautiful motorcycle art [w/video]

Thu, 08 May 2014

Ugly Moto is a horrible name for a company that makes such wonderful motorcycle art. The creation of artist Francis Ooi, the company's illustrations focus on some of the iconic racing bikes of the 1960s and 1970s.
The artwork has an elegant simplicity that really makes it pop. It would fit just about anywhere from a home office to the bedroom of a young gearhead. Ooi has completed six illustrations so far covering classic cycles from Honda, Ducati, Yamaha and even Harley-Davidson. According to his site, the Suzuki RGB500 ridden by Barry Sheene will be the next one released. All of the prints are priced at $65 and are limited to 100 copies. They are all about 16.53 inches by 23.58 inches in size.
According to his website, these prints are just a hobby for Ooi and his real career is as the creative director at an ad agency. He creates the illustrations on his Mac, and he estimates that each design with about 800 components and layers takes about a month to complete. You can get idea of the process involved in the time-lapse video below.

Honda S660 set for Yokkaichi production next year

Tue, 06 May 2014

Roadsters, you might argue, are best when they're small and nimble. If you're thinking of the Mazda MX-5 Miata, you're on the right track, but there have been even smaller ones: pint-sized, three-cylinder roadsters like the Daihatsu Copen, Suzuki Cappuccino and Smart Roadster. But the most iconic and enduring of them was surely the Honda Beat.
Designed by Pininfarina, the Beat was - not unlike the F40 was for Enzo Ferrari - the last car approved for production by company founder Soichiro Honda. It complied with Japan's strict Kei car regulations and packed a tiny, naturally aspirated 656 cc that produced just 63 horsepower. The cult classic ended production in 1996, but six months ago Honda hinted at a revival with the presentation of the S660 concept at the 2013 Tokyo Motor Show. Now it seems Honda - or Yachiyo, we should say - is gearing up to put it into production at the same factory that produced the Beat two decades ago.
That plant is the Yokkaichi factory, a facility owned by Yachiyo Industry Co., Ltd. that builds small cars on contract for Honda. It was slated for a major expansion a few years ago until Honda shifted some of its small car production to its own plant in Suzuka, but continues to build the N series of boxy, upright hatchbacks, as well as small commercial vehicles like the Life and Vamos lines. The reintroduction of a small roadster line to the factory's output sometime in 2015 will undoubtedly be a cause for celebration in Yokkaichi. For our part we can only hope that American Honda CEO Tetsuo Iwamura gets his way and manages to bring the S660 to the US in the near future.

Five automakers now being investigated by NHTSA for airbag woes

Thu, 12 Jun 2014

It appears that Toyota's renotification to owners of recalled vehicles from last year is just the tip of the iceberg for what could potentially be a much larger industry-wide recall. The National Highway Traffic Safety Administration is opening a preliminary evaluation investigation into roughly 1.1 million vehicles from Chrysler, Honda, Mazda, Nissan, Toyota and parts supplier Takata regarding faulty airbag inflators in several models.
NHTSA has received six reports - three directly, two from Takata and one from Toyota - of vehicles with ruptured airbag inflators from 2002-2006, which resulted in three injuries. So far, all six incidents have occurred in high humidity areas like Florida and Puerto Rico. According to Toyota's latest recall announcement, the inflators may have an improper propellant that could cause it to rupture in a crash and the bag to deploy abnormally.
This new investigation follows a previous recall from April 2013 of about 3.4 million vehicles worldwide for the airbag inflators from Takata. As Autoblog reported, Toyota jumpstarted the new situation when it found that the original list of serial numbers for the faulty part was incomplete and discovered more cars in need of replacement. Honda and Nissan told us that they were investigating whether further models would need called in again as well. Mazda told Autoblog: "Regarding the current Takata situation, we're working closely with NHTSA and investigating the situation, but nothing else to report at this time." Chrysler Group responded to us with the statement: "Chrysler Group engineers are conducting the appropriate analysis. The Company will cooperate fully with the National Highway Traffic Administration."