2014 Honda Cr-z Ex on 2040-cars

Auto blog

Honda flaunts freshened 2014 Civic Coupe at SEMA

Honda took the wraps off its 2014 Civic Coupe (red car pictured above) and 2014 Civic Si (gray car in the gallery below) at SEMA today, revealing a mid-cycle refresh for each model. The standard Civic coupe benefits from several cosmetic enhancements, while the Civic Si gets the bulk of its improvements under the hood - precisely where the enthusiasts want them.
The best-selling Civic Coupe sports a new front fascia that is "fun and sporty," says the automaker. The more aggressive snout is a step in the proper direction, as its new shape and exclusive grille design gives the two-door a distinctive appearance that sets it apart from its sedan sibling. The rear end follows the same design language, as the lower portion of the urethane bumper gains some character - its smooth surface has been resculpted and recontoured. Newly available 18-inch wheels complete the exterior transformation.
The 2014 Civic Si benefits from a larger spoiler and new wheels, but the big news is in the powertrain. Honda has massaged the 2.4-liter i-VTEC engine and opened up the exhaust system. As a result, output climbs to 205 horsepower (up from 201) and torque increases to 174 pound-feet (up from 170). The power gains aren't extraordinary, but they should allow the coupe to hit 60 miles per hour from a standstill in about six seconds flat and still return over 30 mpg on the open road. Scroll down for the official release.

2014 Honda HPD CR-Z

Honda invited us to its Southern California North American headquarters last week to take a spin in a very special CR-Z - one modified with a full complement of Honda Performance Development (HPD) components. While the company has been racing with HPD parts for years, this is the first time the automaker has offered them for its street-legal vehicles, and it has chosen this year's SEMA Show in Las Vegas to be the launch venue. Last year, Honda introduced the HPD Supercharged CR-Z Concept at SEMA - this is the slightly modified production version.
The complete transformation gives the normally placid hybrid hatchback a serious shot of adrenaline thanks to a bolt-on supercharger combined with suspension, tire, brake and exhaust upgrades. In addition to the blower (detailed in a bullet point below), new HPD suspension components lower the car by about half an inch, and firmer spring rates stiffen the ride. Stock 16- or 17-inch wheels are then replaced with HPD 18-inch alloys wrapped in sticky Michelin Pilot Super Sport tires (215/40ZR18 at all corners). The clutch is upgraded, a limited-slip differential is installed and new HPD monobloc four-piston calipers are fitted over slotted and ventilated iron rotors up front (the single-pistons over solid discs on the back axle are unchanged). In the rear, the stock hidden single exhaust pipe is replaced by a free-flow twin-tip exhaust that peers out of a new HPD lower diffuser. Other cosmetic enhancements include an HPD front lip spoiler, rear deck lid spoiler and an HPD emblem kit for each side. To say the CR-Z is transformed by the complete HPD package is an understatement.
Driving Notes

2015 Honda Fit production gets underway in Mexico

After two years of construction, Honda's new factory in Celaya, Mexico, has officially begun production of the all-new 2015 Fit in North America. Mexican President Enrique Pena Nieto and Honda President and CEO Takanobu Ito both attended the opening and watched the first Fit roll off the line at the $800-million plant. Later this year, Honda will add production of its new Vezel small crossover to the new facility, though the latter is expected to be marketed in North America under a new name.
The Celaya factory will specialize in building subcompact cars by employing cutting-edge tech to use less material and less energy during production. Honda is still constructing a $470-million transmission plant on the campus to build continuously variable transmissions in the second half of 2015. When it's finished, it is expected to have an annual capacity of 200,000 vehicles and employ 3,200 people.
With the facility's completion, Honda now has a 1.92-million unit annual production capacity in North America, and it claims that when Celaya reaches full production, 95-percent of vehicles sold in the US will be built in North America. The new Fit has already proven quite popular in Japan, and now we will have to wait and see if North American buyers embrace it as well. The first new Fit customer cars will hit the roads later this spring, and as Honda spokesman Steve Kinkade tells Autoblog, all Fit models sold in North American will be built at the plant. Scroll down to read the full press release about the Fit and its new Mexican home.