Find or Sell Used Cars, Trucks, and SUVs in USA

1982 Jeep Cj-8 Scrambler Fuel Injected 4.0l Inline 6 Truck 4x4 4wd! on 2040-cars

Year:1982 Mileage:157000 Color: Green /
 Tan
Location:

Queens, NY, United States

Queens, NY, United States
Transmission:4 SPEED MANUAL
Body Type:Pickup Truck
Engine:258CI INLINE 6 CYLINDER FUEL INJECTED
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
VIN: 1JCCM88E0CT054755 Year: 1982
Number of Cylinders: 6
Model: CJ
Trim: SCRAMBLER
Drive Type: 4WD
Options: FULL 1/2 HARDTOP, FUEL INJECTION
Mileage: 157,000
Power Options: POWER STEERING
Sub Model: WATCH VIDEOS!
Exterior Color: Green
Interior Color: Tan
Warranty: Vehicle does NOT have an existing warranty
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

HERE IS A GORGEOUS 1982 JEEP CJ-8 SCRAMBLER WITH UPGRADED 4.0 LITER FUEL INJECTED INLINE 6CYLINDER AND 4 SPEED MANUAL TRANSMISSION THAT IS ABSOLUTELY TURN-KEY AND READY TO DRIVER ANYWHERE AT THE DROP OF A HAT!

Please e-mail me with questions or to set up an inspection to see the car in person.

Vehicle came out of Missouri. I purchased it a few months ago and have used it as a shop truck of sorts before I did some work to it to make it look the way it does. It was redone about 10-12 years ago and has been gently used since then. It has been well serviced and upgraded with a YJ 4.0Liter fuel injected straight 6, which makes it spot on reliable! This is by far the most dependable and reliable truck I've owned in a long time, with 157k original miles.

OPTIONS:

Power steering

Manual front DISC brakes

Bucket seat interior

Custom center console

Full 1/2 Hardtop

Stock wheels with radial Wrangler tires

4 speed manual transmission

4.0Liter 258ci Fuel-Injected Inline 6 cylinder motor

Tow hitch

Flowmaster style single muffler exhaust

Mechanically it fires right up and sounds great along with the nice and throaty exhaust system. Motor has been upgraded to the later model YJ 4.0 Liter with Fuel-Injection. Transmission is solid and shifts good through all the gears without any noises or grinding, with a good clutch. Now as for driving the car, i've taken it out of state several times, and everywhere around town to haul parts. You can cruise with it on the highway all day and I would trust it to drive anywhere at the drop of a hat.

Interior is very presentable. Seats in decent shape (some wear by passenger seat lower back area. Door panels excellent (needs new driver's side inner handle). Dash is very nice with one tiny hairline crack. Overall very presentable for a working man's driver truck.

Underside has a SOLID frame. Floorboards have had a couple of prior patches by footwell areas. Bed is in GOOD shape overall with some small patches near the inner wheel well area.

The old girl is NOT perfect by any means of course so please keep that in mind when bidding. Paint is in GOOD shape and cleans up very nice, but was NOT a $10k paintjob so please keep that in mind (looks good but has some issues of course like small dings, a few touch-ups, some scratches, and the like). Rear driver's side wheel flare cracked. Underside has scaly surface rust as you would expect from normal use. Not working: horn, fuel gauge, temp gauge, perhaps a bulb or two may need replacing where needed. 

 So overall she is not perfect and will need some form of TLC depending on how nice you want it to be and what you plan to do with the car. Please note, I cannot remember every single issue with the car, nor do I know everything wrong with it, as it is after all over 30 years old  so keep that in mind.

If you just want a GREAT LOOKING and mechanically excellent DRIVER needing tlc, this is the car for you. If you want a show car, it will need some considerable investment or total restoration to bring it up to that level of course. I ENCOURAGE ANYONE BIDDING OR SERIOUSLY INTERESTED TO COME LOOK AT IT IN PERSON. I WILL BE GLAD TO SHOW IT TO YOU TOP TO BOTTOM SO YOU KNOW EXACTLY WHAT YOU'RE GETTING INTO.

Auction Rules:

We would like to encourage you to Please follow our rules of the auction and refrain from creating your own! All inspections must be completed prior to auction close. Winning bidder will provide a $1000 deposit within 48 hrs of auction close. Remaining Balance will be paid in full within 7 days of Auction close. All vehicles must be removed within 14 days of Auction close, After such time a $20 a day storage fee will be applied. All vehicles are sold AS/IS please review our warrenty policy below.

Warranty Information
 

This vehicle is being sold as is, where is with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected the vehicle, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgement solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this vehicle at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the vehicle.

Terms and Conditions
 

Cash (in person) is preferred. Bank Wire transfer is acceptable, as well as a cashier's check (MUST clear in full before vehicle is released). $1000 non-refundable deposit within 48 hours.


Auto Services in New York

Wheel Fix It Corp ★★★★★

Automobile Parts & Supplies, Auto Body Parts, Tire Recap, Retread & Repair
Address: 55 St Mary`s Place, Freeport
Phone: (516) 825-0600

Warner`s Auto Body ★★★★★

Automobile Body Repairing & Painting
Address: 2650 Pleasant Valley Rd, Mottville
Phone: (315) 673-3521

Vision Kia of Canandaigua ★★★★★

New Car Dealers, Used Car Dealers, Auto Oil & Lube
Address: 2445 Rochester Rd Route 332, Penn-Yan
Phone: (585) 394-4542

Vision Ford New Wholesale Parts Body Shop ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Body Repairing & Painting
Address: 4545 W Ridge Rd, Rochester
Phone: (585) 352-1200

Vince Marinaro Automotive Inc ★★★★★

Auto Repair & Service
Address: 1459 N Clinton Ave, North-Greece
Phone: (585) 342-8010

Valu Muffler & Brake ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 3099 Delaware Ave, Niagara-University
Phone: (866) 595-6470

Auto blog

Fiat 500X poised for Paris catwalk

Wed, 05 Feb 2014

We've known for some time that the new, Fiat-based baby Jeep (which may or may not be called the Jeepster) is set to arrive at the 2014 Geneva Motor Show. What we weren't sure of was whether its platform mate, the so-called Fiat 500X, would be doing so alongside or at a later date. Well, according to Reuters, we'll get to see the first all-wheel-drive 500 later this year in the City of Lights.
Yes, we can expect the 500X to arrive at the 2014 Paris Motor Show, according to an official with an Italian trade union. The unnamed source cited retooling at Fiat's Melfi factory, in southern Italy, which currently produces the Grande Punto. It's expected that the newest member of the growing 500 family will replace the Suzuki SX4-based Fiat Sedici, although when the X will go on sale remains an open question.
According to Reuters, both the Jeepster and 500X will be built alongside each other in Italy. Whether the 500X will cross the pond with it's slat-grilled cousin, though, remains to be seen (we're leaning towards yes).

Chrysler investing $20M in Toledo plant to support 9-speed auto production

Sun, 28 Apr 2013

In 2011, Chrysler announced a $72-million investment in its Toledo Machining Plant to modernize production of the eight- and nine-speed torque-converters for automatic transmissions made there. That upgrade work won't be finished until Q3 of this year, but Chrysler has already announced a further $19.6-million investment to increase production capacity for the nine-speeders.
The extra units will be necessary because the nine-speed transmission they'll be mated to is going into three popular models: it will debut on the 2014 Jeep Cherokee, then go into the Chrysler 200 and Dodge Dart. The company predicted that this year alone it would sell 200,000 units equipped with the nine-speed tranny, and it is spending some $374 million in addition to the investment in Toledo to upgrade production capacity for it.
The work attached to this new investment won't begin until Q3 of 2014, and it will be finished by the end of that year. There's a press release below with all the details.

Chinese Jeep production confirmed with Fiat, Guangzhou agreement

Wed, 21 Aug 2013

Fiat has just finalized a deal originally set up in January between it and China's Guangzhou Automotive Group to bring Jeep production to China. It remains unclear which models will be built, although we're wagering that it'll be the 2014 Cherokee. What we do know, now, is where production will take place.
According to Automotive News, Guangzhou originally wanted production to take place in its home assembly plant in its namesake city. Fiat has battled to send production to a joint venture facility established between Guangzhou and Fiat in the town of Changsha. The joint facility won out, and now the factory, originally built in 2010 with a 140,000-unit capacity, will see Jeeps rolling out of it.
Currently, the GAC-Fiat factory produces the Fiat Viaggio, a jointly developed product that is closely related to America's Dodge Dart. And while it remains unclear as to which model will join the Viaggio on the assembly line, that model is understood to ride on Fiat's Compact platform. The only Jeep to share those underpinnings is the new Cherokee, so there's not much connecting of dots needed to see why this scenario would make sense.