1986 Jeep Cj 7 All Original on 2040-cars
Troup, Texas, United States
This is the last year for the CJ7 series, it a great Jeep in good running condition. The motor runs great, T5 tranny works great,all running gear is in good shape, body of the Jeep is straight as is the frame. The Jeep is all original down to the chrome rims. You will see in the photos on the driver door side that there is a rust problem. The floorpans also have a couple of rust issues but I have been all over the Jeep and these are the 3 areas of rust that will need to be fixed. I have restored many Jeeps over the years and fixing this rust issue is fairly easy. The Jeep had been sitting up for a few years so when i got it home I rebuilt the carb ..it did not need anything else..exhaust system is good. Tires are in very good shape, the right front tire still has the blue on it. This jeep did come with factory air, but it has been taken off. I have an under the dash unit that is practically new and I would sell it seperately. I buy Jeep CJ's to restore, have done several over the last few years but age has caught up with me. I will restore this jeep if it does not sell but would rather sell it and just get my money out of it. I am asking exactly what I paid for it. I am old and do not email, my wife does it for me...so any questions will be answered when she gets home from work. You can call me at 903.539.2410 but not after 8:30 pm |
Jeep CJ for Sale
- 1978 jeep cj 5 beautiful!(US $17,000.00)
- 1978 jeep cj-7 golden eagle original no reserve!!!
- *!*1967*!*cj5 * dauntless v6 *!* 3400 miles on frame off restore *!* 1 of a kind(US $23,900.00)
- 1982 jeep scrambler , show stopper , custom build over $40k spent , no excuses(US $33,998.00)
- 2 door cj-5 frame-up restoration, 304 cid low miles suv gasoline 304 v8 red(US $19,990.00)
- 1974 jeep cj5 4x4, 304 v8, 3 speed manual transmission excellent
Auto Services in Texas
Xtreme Customs Body and Paint ★★★★★
Woodard Paint & Body ★★★★★
Whitlock Auto Kare & Sale ★★★★★
Wesley Chitty Garage-Body Shop ★★★★★
Weathersbee Electric Co ★★★★★
Wayside Radiator Inc ★★★★★
Auto blog
What's really going on with the 2014 Jeep Cherokee's transmission issues?
Fri, 27 Sep 2013On September 23, Automotive News reported that Chrysler had idled the second shift workers it hired just five weeks prior at its Toledo Assembly Complex to build the 2014 Jeep Cherokee. At the time, Chrysler said it had "built the critical number of vehicles we need to stock dealerships once containment is released" and did not want "to put additional strain on our logistics partners ... upon release." That reasoning was not only unusual, it didn't seem to make sense.
It appears the center of the nine-speed issue is software, not hardware.
That same day, the Detroit News ran a piece claiming workers at the Toledo factory said the halt was due to issues with the Cherokee's transmission. It put the number of already-built Cherokees needing fixes at 1,000 and said that some of the workers not laid off had been instructed "to take the Jeep on long test-drives." That made more sense. Three days later, on September 26, Automotive News reported that the 500 workers laid off had been reinstated, with engineers "speeding repairs on the SUV's powertrain software." The AN piece didn't put a number on how many units are being fixed, but it did say that 12,000 have been built and are awaiting delivery to dealers. The best it could say about when dealers will get them, however, is that "progress on a fix is being made. It's unclear when shipments to dealers will start."
Marchionne: Midsize pickup still not in the cards; Ram 1500, Jeep Wrangler could use aluminum
Wed, 07 May 2014During the Fiat-Chrysler briefings on Tuesday, Reid Bigland, head of Ram Trucks, outlined the new product plans for his brand, including confirmation that an all-new light-duty Ram 1500 will launch in 2017. From there, discussions spun off in two directions, with the main questions being: will Ram build a midsize pickup? And, following Ford's move to extensively use aluminum in its new 2015 F-150, will Chrysler be using this weight-saving material for the next round of its fullsize truck, as well?
"I think there is room for a Ram 1000," Fiat-Chrysler CEO Sergio Marchionne (pictured above) told members of the media, saying this is a conversation the automaker has been having internally for several years now. "We've tried this ... we've actually taken it to clinics," Marchionne stated, adding that the "response has been lukewarm."
"I have better use of aluminum in this house than a pickup truck." - Sergio Marchionne
Jeep Renegade's development a template for new Fiat Chrysler Auto
Wed, 24 Sep 2014
"We figured we'd take the best of both worlds." - Ralph Gilles.
The international makeup of the 2015 Jeep Renegade will serve as a template for cooperation within the newly formed Fiat Chrysler Automobiles, Senior Vice President of Product Design Ralph Gilles said.