Es350 Keyless Start Htd/cooled Pwr Lthr Seats Moonroof on 2040-cars

Auto blog

Toyota Camry, Lexus RX to get aluminum parts

Ah, aluminum. The lightweight, strong material has long held a following within the premium ranks, but as Ford prepares to launch an aluminum F-150, the material is gaining acceptance among more mainstream automakers. Toyota is one such brand, with a new report indicating that the Japanese giant will add aluminum bits and bobs to some of its upcoming vehicles.
These won't be full, aluminum-intensive treatments like the F-150, however. Automotive News reports that an aluminum hood and liftgate will be coming to the 2016 Lexus RX, and following that, the Camry will get a bonnet built from Element 13 for model year 2018.
As AN points out, Toyota is no stranger to aluminum, using it in Japanese-built models like the Prius and Scion FR-S. The RX and Camry, though, will mark the first time the company's North American factories will use the material, and they'll do so on a significantly larger scale, owing to the higher volumes that the Camry and RX represent.

Production Lexus NX leaked in Jim Lentz presentation?

Before kicking off the Detroit Auto Show, the Society of Automotive Analysts had Toyota CEO Jim Lentz come on stage to say some words about the future of the auto industry, as well as what's coming for Toyota. While this type of information would normally stay off our radar, a video of his speech likely gives us our first look - albeit low-res - at the production version of the Lexus NX compact crossover.
In the video recorded by AmericaJR, Lentz refers to the turbocharged LF-NX Concept that was on display at the Tokyo Motor Show, but comparing this image to our gallery from Tokyo, there are clear differences between the two vehicles. These include the toned-down shape of the spindle grille, lower fascia crease and door mirrors as well as a headlight design that more closely resembles that of the 2014 IS sedan and the newly introduced RC coupe. From what we can see of the rest of this image, the NX should retain some of the LF-NX's angular side body creases. The vehicle you see above basically looks ready for production.
If this is in fact the NX, then reports of a Geneva debut for the luxury crossover seem even more accurate. The entire video is posted below, but the NX comes on screen around the 10:40 mark.

Lexus IS 250 to get new turbo four?

"All show, no go." That's how I described the 2014 Lexus IS 250 F Sport that you see above, when I reviewed it back in November. Don't get me wrong, there's a lot to like about the new IS, but the 204-horsepower, 2.5-liter V6 in the IS 250 is not on that list. In my review, I suggested that Lexus ought to get on the bandwagon of offering a small-displacement, turbocharged, four-cylinder engine in its base IS (like its rivals), and now the folks at Motor Trend are furthering that discussion.
Lexus pulled the wraps off its new NX 200t crossover at the Beijing show recently, and it'll be the first vehicle in the company's lineup to use a brand-new - you guessed it - 2.0-liter turbo-four. With 238 horsepower and 258 pound-feet of torque on tap, that represents a healthy increase over the 204 hp and anemic 185 lb-ft currently being offered with the 2.5-liter V6, and we imagine the fuel economy gains will be rather significant, too. For comparison, the Lexus' four-pot power numbers are very close to the 240 hp and 255 lb-ft offered in the same-sized engine that BMW uses in the 328i.
Motor Trend also posits that Lexus may consider changing the base IS' name from 250 to 200, or perhaps 200t, to properly reflect the new engine's displacement. Of course, that's assuming Lexus doesn't pull a BMW or Mercedes-Benz, and no longer has its alphanumeric names properly reflect the size of the powerplant found underhood.