Reg Cab I4 Manual B-series 2wd Truck 2 Dr Truck Manual Gasoline 2.3l 4 Cyl Silv on 2040-cars

Auto blog

Next Mazda MX-5 Miata headed for 2015 Chicago debut

Twenty-six years after it was introduced at the 1989 Chicago Auto Show, the much anticipated fourth generation Mazda MX-5 Miata will meet the press at the 2015 Chicago show. A piece in Autocar refines some of the details on the larger, lighter Miata that a Mazda insider has said will be "our best-looking car ever."
The company has relented on the quest for the metric tonne, the 1000-kilogram (2,200-pound) target too difficult to achieve in light of cost constraints. You can still expect it to lose a generous dollop of weight - Autocar says a curb weight of 1,100 kg (2,420 pounds) will still make it the lightest in its class. And Mazda will be stressing a fun driving experience through light weight and a modest amount of naturally-aspirated horsepower. Engine capacities of 1.5 and 2.0 liters are expected. Sounds familiar (and good), right?
The Miata's interpretation of Kodo design will be veer from that found on the Mazda3 and Mazda6, with "very clean and simple" lines marking out "more muscular proportions" and elongated bodywork on a longer wheelbase. A stretched engine bay will make room for the current Skyactiv engine and perhaps the future Skyactiv 2 powerplants, initial reports suggesting there could be a 30-percent increase in fuel economy from the moment it arrives.

Mazda CX-3 almost ready for LA Show

The Mazda CX-3 is just days away from its unveiling at the 2014 Los Angeles Auto Show, but elsewhere in the world, the Japanese brand still has the compact crossover disguised for testing. These spy shots aren't too camouflaged though, and when combined with the previous teaser image, they give a pretty clear idea what the new model will look like.
The grille here is well covered, but the photo from the front reveals the similarities to the design sketch. The rear shows a similar horizontally oriented design as the Mazda2, which the CUV is based on. However, the dipping sides around the B-pillar from the teaser don't appear to be on this tester. Even with all the swirls, the vehicle looks fairly attractive.
Mazda is doing a fantastic job of keeping mechanical details about the CX-3 a secret. It's not yet known whether the model is front-wheel-drive only or if all-wheel drive is also an option. The crossover also likely shares the Mazda2's engine, which isn't revealed for North America, yet. The diminutive CUV will compete with a huge crop of new classmates, including the Fiat 500X, Jeep Renegade, Chevrolet Trax and Honda HR-V. Check out the gallery for the latest glimpses of this Japanese CUV just days ahead of its full debut.

Mazda's new Mexican plant capacity rises to 230,000

After the turmoil of last year, 2013 is getting off to a much better start for Mazda. The company has issued a release indicating that the forthcoming plant in Salamanca, Mexico has had its production capacity raised even though it isn't scheduled to go online until March 2014. The original plans called for a 140,000-unit capacity, 90,000 of that allotted for the Mazda2 and Mazda3, the remaining 50,000 for a small car Mazda would build for Toyota that would be based on the Mazda2. The new plans call for raising that by 90,000 units to a total of 230,000 units within two years, by the end of March 2016, and it looks like it will all go toward Mazda production to satisfy growing demand for Skyactiv vehciles. The Mexican plant's opening will be the return of Mazda manufacturing to North America, after Mazda6 production was moved back to Japan last year.
More good news for the company is that it projects 10 billion yen ($114 million) in net income for the financial year that will end in March. That would be a welcome turnaround from the 100-billion-yen loss in the previous financial year, part of a series of three annual losses in a four-year span.
You'll find the press release with the factory update below.