1993 Mazda Rx-7 Touring Coupe 2-door 1.3l Twin Turbo Rotary on 2040-cars
Forsyth, Georgia, United States
|
This vehicle would make a great starting platform for someone looking to convert it for racing!
The car was purchased in 1994 by my brother (second owner) and has been in the family ever since. It is mostly stock (see below for exceptions) and has been kept in a garage or carport for most of the last 20 years. It is in very good physical condition for its age and mileage. The car has 120,654 miles on the frame. The engine has somewhere between 50K and 60K. The clutch has about 10,000 miles on it. As far as I know, the car has been in one accident in 2003; it was hit in the right front quarter. There are some minor body alignment issues on the right front corner with the bumper, hood, and headlight, but nothing excessive. There is also a small dent over the passenger door where it was hit by a falling tree branch. There is some paint oxidation on the roof and rear bumper that can probably be polished out. The hood and front bumper are in better shape because they were repainted after the accident. There are minor paint dings in a few places, the largest of which is on the driver's door where someone opened a car door into it. All of these issues should be visible from the photos. The interior of the car is in very good shape. There is some normal wear in the leather of the driver's seat as would be expected from the car's age. The carpet is clean and has been protected by floor mats for the life of the car. The car is equipped with the Bose Acoustic Wave sound system that was created especially for this model car. The subwoofer system in the rear needs an amplifier rebuild. See the photos for details on interior condition. About a year ago, the car was taken to our local Mazda dealer because it would not accelerate. By the time it had been moved a couple of times in the parking lot where it broke down and then put on a tow truck, it had flooded out. The dealer replaced the plugs, wires, and coils to get it started again. At that point, they started trying to troubleshoot the acceleration problem. They replaced the fuel pump with an aftermarket unit and apparently broke the fuel quantity sending unit in the process. The fuel gauge does not currently work, although the low fuel light still comes on at the proper time. The next thing the dealer tried was replacing the catalytic converters, which were supposedly clogged. They couldn't find suitable replacements, so they installed a performance steel downpipe. So the car is now straight-piped from the turbo outlet to the muffler. They spent a couple of months messing with it and could never get it to work. We sent it to a Mazda specialist in Atlanta who replaced the throttle position sensor and then the secondary fuel injectors and finally got the car running again. Less than two thousand miles later, the plastic coolant air separator tank split, causing the car to overheat and shut down just down the street from our driveway. We were able to restart the car after it cooled and move it into the driveway, where we replaced the air separator tank with an aluminum one and replaced the coolant. However, we have not been able to start the car since. It is badly flooded again and will drip oily fuel out the exhaust. We tried removing the plugs and cleaning them, draining the combustion chambers, and reassembling it, but no luck. The car will fire and sputter a little bit, but won't catch and start. Fixing it may be as simple as new plugs, or it may take some more drastic measures. I honestly don't know. We had to replace the car with something more reliable for my son to drive to school, so we are selling the car as-is. This car would be a great project purchase for someone more mechanically inclined than I am who can get it started, tuned up, and maybe converted for racing. It is lightning fast and a lot of fun to drive. In addition to the repairs and modifications above, most of the vacuum lines and check valves have been recently replaced and it has a new alternator and serpentine belt. Buyer will be responsible for taking delivery of the car or having it shipped to your location. It will require transport that can account for the fact that it cannot be started. Thanks for looking! I would love to see this car go to someone who will fix it up and really enjoy it to its full potential. My brother loved driving it, my son loved driving it, and I'm sure you will too! |
Mazda RX-7 for Sale
1989 mazda rx-7 convertible - low mileage(US $4,875.00)
Clean 1993 red mazda rx7 r2 fd turbo rotary import of the year only 731 made!
Collectable low miles 89000miles 89000miles looks and runs great drive it home(US $1,950.00)
1984 mazda rx-7 v8 - as seen on youtube - fb rx7 ford 302 5 speed manual(US $6,999.00)
1991 mazda rx-7 convertible 66k miles 100% originial !
1993 mazda rx-7 -ocasion - 6.900.00usd
Auto Services in Georgia
World Toyota ★★★★★
Watson/Boyd Auto Repair ★★★★★
Trantham`s Service Center & Wrecker Service ★★★★★
Thomson Automotive Parts ★★★★★
Suwanee Park Auto Service ★★★★★
Summit Racing Equipment ★★★★★
Auto blog
Mazda CEO closes door on talk of RX sports car revival
Mon, 10 Nov 2014Some rumors in the auto industry simply refuse to die. Over the last decade, a few of the strongest have focused on Japan. A few years ago, we could have explained away the constant whispering over a new Toyota Supra, Acura NSX or Mazda RX-7 as nostalgia for Japan's golden era of performance. Today, though is different.
We already have the Nissan GT-R, and, thanks to the Toyota FT-1 Concept, a Supra successor finally appears to be on the way. Acura will someday, allegedly, deliver on its promise to put the NSX on sale. So where does that leave the third member of the Japanese performance trio mentioned above? Well, um, it still isn't happening.
"We don't have that kind of vehicle in our future product plan," Mazda CEO Masamichi Kogai told Automotive News when asked about a successor to the rotary-powered RX line. "If you increase the number of segments, then the resources we can allocate to each will decline and that will prevent us from developing truly good products."
2016 Mazda MX-5 Miata has arrived
Wed, 03 Sep 2014Ladies and gentlemen, meet the 2016 Mazda MX-5 Miata. The highly anticipated fourth-generation (ND) model made its official debut in Monterey, CA this evening, and while details are slim (as in, we have practically none), there's one big thing to talk about: less weight.
Yes, Mazda has confirmed that the new Miata sheds some 220 pounds over the model it replaces, and is "the most compact of any generation MX-5 so far." For those keeping track, that means the new MX-5 should weigh in somewhere around 2,200 pounds.
Mazda's Kodo design language is obvious here, with a seriously wide and low demeanor, and a mix of flowing lines and sharp angles. We don't have any powertrain details to report as of this writing, but Mazda says the full suite of Skyactiv technologies are onboard, and the motto in creating this car was "Innovate in order to preserve."
Mazda struggles to meet demand on rising sales
Mon, 23 Sep 2013
For Mazda there's good and not-so-good news on the heels of strong US sales in 2012: demand is high - especially for the Mazda3, Mazda6 and CX-5 - but supply is low, TheDetroitBureau.com reports. That's partly because all Mazda production happens in Japan, since it ended its alliance with Ford and pulled out of a joint venture with the blue oval building cars in suburban Detroit last year.
In 2012, Mazda sales here jumped 26.4 percent, but 2013 sales through August have just been keeping pace with the overall US auto industry, increasing at a rate of 6.8 percent. Mazda North American Operations director of marketing and communications Jeremy Barnes says that sales have slowed because the company is facing challenges delivering products here.