Find or Sell Used Cars, Trucks, and SUVs in USA

1990 Nissan 24sx S13, Cacc Caged Race/drift Street Legal Hatchback on 2040-cars

Year:1990 Mileage:255000
Location:

New Westminster, British Columbia, Canada

New Westminster, British Columbia, Canada

Selling my 10year plus project race car. Car is turn key ready to go. Close to 100,000 spent on it. 

Custom cage build above cacc standards with nascar style side bars. Custom engine bay reinforced tubing built for front end rigidity. 

Engine is a SR20DET (80k on the JDM motor) with oversize metal HG and every bolt-on you can think off. The exhaust side is a top mount full-race kit with a 2871r turbo and external wastegate. Intake is a Freddy manifold with a 3inch q45 throttle body. Has an aluminum radiator and oil cooler. Act street friendly heavy duty clutch and fidanza light weight flywheel with a replaceable surface disk. Runs strong at 21 - 23 psi and 350 rwhp. Brains are an hks Ebc and an hks fcon pro.

Suspension is completely Hyme joint and all arms adjustable. Zeal coilovers with 300zx front and rear brakes with working 300zx h-brake. Power slot rotors and hp+ pads. Power steering is disabled. But can be activated again. 19 inch weds sa90 wheels 9.5/10.5. Cusco 1.5 way LSD still brand new, installed with all new bearings and seals. 5bolt conversion front and back. Alignment done by Levitt Autobody by an experienced racer/mechanic. Car has been corner weighted as well with 53/47 front to back weight ratio. 

Body has the 91-93 front end with wide-body fenders and a very classy lip molded to the body. Rear fenders where pie cut and stretched out 50mm a side for a real metal wide body look. Paint job is fresh and looks good. Rear cf trunk lid with the JDM taillights. 

Interior has been gutted and sound deadning scrapped off. Comes with 2 authentic L-bride zeta 3s, 6-point Omp harnesses. custom hand made dash and greddy/autometer gauges. Sunroof, power windows and mirrors. Has a stiff feel short shifter and a 35 liter fuel cell. 

There is a massive list of mods. I'll put one together for anyone's a interested and would like to read a novel. Pictures dont do justice. 

Just like any race car has small things that it needs.

Complete parts list is as follows:

Performance:

Black top SR20DET
HKS Metal over-sized head gasket
Koyo aluminum radiator
Large Lordco bought Oil Cooler
Samco Radiator Hoses
Kodiak T clamps
Nismo Radiator cap
Nismo oil cap
Nismo engine mounts
Nismo Performance thermostat
Spitfire Ignition System
Greddy Oil relation kit and SS cooler lines
Greddy over-sized oil pan
Greddy FMIC
Greddy oil catch can
Greddy oil filters
Full-race top-mount exhaust manifold
Tial 36 or 38mm external waste gate
Garret 2871r Turbo
Full-race v-clamp Turbo Exhaust Housing
Full-race 3 inch downpipe
3 stainless steel exhaust
740cc injectors. . ...Sard of nismo
Aeromotive Fuel Pressure regulator
Aeromotive inline fuel filter
Aeromotive A1000 fuel pump
SS fuel lines
Dual thin Flex-a-lite Electric fans + thermostat
6 inch K&N Intake cone
Q45 3 inch throttle body
Fidanza light-weight aluminum flywheel with replaceable friction disk
ACT heavy duty sprung clutch
Nismo slave cylinder
SS clutch line
SS turbo lines
35 Gallon Fuel cell

Electronics:

HKS Fcon V Pro Standalone
HKS EVC-S Boost Controller
Greddy 60mm gauges:
-oil temp
-oil pressure
-water temp
-Boost
Autometer gauges:
-KPH Speedometer
-Tachometer -- 10k RPM with a shift light
-volt
-fuel
Taylor aluminum battery box
Brand New Odyssey p1500 high performance battery
Joe's racing kill switch
Joe's racing acc + button start
All unnecessary wiring was stripped and re-loomed
Compustar alarm + remote start

Suspension and Chassis Reinforcement:

Custom Engine DOM-tube cage tied in to the upper strut mounts, frame, A-pillar and with a
removable strut-bar
Boxed + Reinforced Front tension rod bracket
White-line adjustable Front + Back sway bars
Battle Version adjustable Front tension arms
Battle Version adjustable Rear upper control arms
Battle Version adjustable Rear tow arms
Battle Version adjustable Rear traction arms
Not a hicas model
Megan racing Front + Rear adjustable lower control arms
Front 5-bolt kit
Rear 300zx 5-bolt + Functional Handbrake 
Front/Rear 300zx brake calipers 4/2 piston
Power slot slotted rotors
HP+ high performance pads
SS brake lines
300zx brake master cylinder (the larger size)
Fully adjustable Zeal coil-over with 4 choices of spring weight
Cusco or Kaaz outer tie rod ends
Cusco or Kaaz inner tie rods
Energy suspension urethane steering rack bushings
Rear sub-frame metal spacers
Cusco 1.5 way torsen LSD, brand new
Rebuilt pumpkin with all new seals and bearings + pinion and gear
One piece drive-shaft from The Driveshaft shop
Suspension is completely HEIM joint
19x9.5/10.5 Weds SA090 Light-weight wheels +20 offset

Custom built cage to CACC standard out of seamless DOM with gusseted reinforcements and 
nascar style crash bars. Driver side is removable. Rear 4 points attach at the rear sub frame 
attachment points. 2 flat bars are ran along the inside outer floor edge for extra chassis 
reinforcement. Rear upper shock mounts are plated and tied in to the cage.

2 Bride Zeta III L-size buckets with bride side mount rails
2 OMP 6-point quick release harnesses
Custom built stylish dash with windshield defrosting vents
Momo steering wheel
Small lordco coolant heater/defroster

Body: 

Front fiber-glass wide body fenders
91-93 Nose
JDM marker lights
Bings lip, molded
Kouki side skirts
USDM kouki rear lip, molded with a cut for bumper removal
Kouki taillights
VIS carbon fiber trunk with new shocks
Custom rear wide fenders, pie cut and stretched, rear metal 
Customised color paintjob. . ...Goldish, metallic black
Gutted interior with no sound-deadening
Gravel Guarded inside floor
Gravel guarded undercarriage
Fiber-glass vented, driver-side, headlight cover
Tubed front inner fenders (lightly)
Sunroof
Power windows
2600lbs with 160lbs me in it
Driver side safety window net
Rear marker lights shaved
Front tow strap

Auto blog

Sebastien Vettel testing Infiniti's production Etherea?

Thu, 30 May 2013

It sounds like Sebastian Vettel has had his hands full recently, juggling his Formula One racing career while moonlighting as the newly appointed director of performance at Infiniti. On that latter note, Autocar is reporting that Vettel has been testing a production version of the Etherea Concept at France's Circuit Paul Ricard.
There is still no word as to when we could see this car go into production or what it will be called (possibly the Q30), but it will likely share a platform with the Mercedes-Benz A-Class as a part of the Daimler/Renault-Nissan collaboration. The article also said that this future entry-level Infiniti would be produced at Nissan's Sunderland, UK plant.

2015 Nissan GT-R updated with new lights, more refined ride

Tue, 19 Nov 2013

The Nismo version of Nissan's high-tech supercar may be getting most of the headlines today, but we shouldn't forget that the car on which it's based, the garden-variety GT-R, has been significantly updated for 2015, as well.
What Nissan engineers focused on for the new model year was making the GT-R a more well-rounded GT car. That means dialing some more compliance into the car's very firm suspension for a more comfortable ride, as well as lightening up the steering at low speeds to make urban maneuvering easier. The braking calibration has also been changed to be more linear and smooth when slowing from normal, everyday speeds. Does this mean the GT-R has gone soft? We'll reserve judgment until we drive it, but Nissan claims the new refinements giving the car "multi-dimensional performance."
The GT-R also gets new lighting technology for 2015, including multi-LED headlights that lend the car a new light signature at night, and the LED taillight rings are now complete circles instead of rings of dots. The headlights are also now controlled by an Adaptive Front Lighting System, which sounds similar to other systems that aim light where the car is being turned, but Nissan's system adjusts the angle of the lights depending on vehicle speed - at higher speeds the lights are angled to project their illumination further.

Nissan rowed the Note ashore [w/video]

Thu, 24 Oct 2013

Normally we wouldn't suggest trying to float your car on water, but Nissan has made some modifications to turn its new Versa Note hatchback into a makeshift rowing shell.
Nissan replaced the car's rear seats with a sliding rear rowing seat, modified the doors to open wider at 90 degrees and fitted a pair of oars. Most importantly, they put the whole thing on a floating platform to keep it from sinking into Eton Dorney Lake, the site of the 2012 Olympic rowing competitions in England (where the car is simply known as the Nissan Note).
Then they invited medal-winning competitive rowers Helen Glover, Sophie Hosking and Polly Swann to come along and row the thing, making use of the around-view monitor system to see where they were going. All in all it may not be quite as cool as the boats which Fiat made out of the 500 or Mini made out of its convertible, but it's still enough to float our boat. Check it out in the video clip and press release below and the image gallery above.