2008 Nissan Altima S M/t 2dr on 2040-cars

Auto blog

Nissan recalling 841k vehicles overseas for steering wheel trouble

A possible issue with a steering wheel bolt in the Nissan Micra (shown) and Cube from the 2002 to 2006 model years has Nissan recalling roughly 841,000 units on four continents, as well as Oceania and the Middle East. On the affected cars, the bolt may not have been tightened properly, which could lead to a loss of steering in a worst-case scenario. According to Reuters, there haven't been any reports of accidents or injuries due to the fault, however.
The Micras affected were built in the UK and Japan, the Cubes in Japan. Nissan has yet to say when the recall will begin, but when it does, owners can take their cars to dealers for repairs; the bolt with either be tightened or, if necessary, a new steering wheel installed.

Hurricane Sandy cost automakers 15,000 vehicles, may have ruined up to 200k

Hurricane Sandy was the largest Atlantic storm in US history, and its total economic impact is just now coming into view. According to Automotive News, Toyota, Chrysler, Nissan and Honda are set to scrap around 15,000 new vehicles ruined by the storm. Nissan alone accounts for about 40 percent of those, with 6,000 Nissan and Infiniti models deeded "un-saleable" due to damage. The company saw 56 dealerships shuttered due to the storm, but 51 of those have since reopened.
Toyota, meanwhile, had some 4,000 vehicles at its Newark port facility, and of those, 3,000 may be scrapped. An additional 825 were dealer inventory when they were ruined. Honda and Acura dealers are reportedly sending 3,440 vehicles to the salvage yard. By comparison, Chrysler weathered the storm fairly well with 825 units destroyed, while Hyundai suffered only 400 lost units and Kia scrapped around 200.
As you may recall, Fisker also suffered some losses, and Automotive News reports the manufacturer saw 320 Karma models damaged beyond repair. Ford and General Motors have yet to come up with estimates, and no automaker has commented on the full cost of replacing the vehicles.

Nissan moving next-gen Murano production from Japan to Mississippi

Celebrating 10 years of operation at its Canton, Mississippi assembly plant, Nissan has announced that it will be adding a seventh vehicle to the plant's portfolio. Starting in 2014, production of the next-generation Murano will move from Japan to Mississippi alongside its platform mate, the Altima, which is a part of Nissan's plan to build 85 percent of its US products domestically.
In addition to the Altima, the Canton facility also produces the Armada, Xterra, Titan, Frontier and NV vans, and back in June, production of the Nissan Sentra production was moved to Canton creating an extra 1,000 jobs. At this point, there is no indication about how many jobs the Murano line will add, if any.
This is the second announcement this week of production being added in the US as Honda said that the Accord Hybrid production would move to Marysville, Ohio where the standard Accord sedan is currently built.