Find or Sell Used Cars, Trucks, and SUVs in USA

2003 2.5l 175hp 6-speed Aztec Red No Reserve on 2040-cars

Year:2003 Mileage:130500
Location:

Sparks Glencoe, Maryland, United States

Sparks Glencoe, Maryland, United States

2003 Nissan Sentra SE-R Spec-V in Aztec Red 130,500 miles

Features:
2.5 liter 4-cylinder engine with 175 hp from the factory
Six-speed manual transmission
17" factory wheels
Sport-tuned suspension
Keyless entry
Power windows and locks
Sunroof
Race-inspired seats
New brakes
Air conditioning recharged
One owner
Clear MD title in hand

I bought this car new from South Point Nissan in Austin, Texas on 7/28/03. I used it as my commuter vehicle for the better part of ten years until getting something larger last fall. Since then I've driven it to work an average of once per week. It is in good condition, though it is an older car, shows some wear, and has typical paint chips and maintenance needs. Interior is in good shape as well. It has generally been a very reliable daily driver for me and is a blast to drive.

I really enjoy driving this car. It has good power and responsiveness and corners nicely. The six speed manual is a ton of fun. I changed the oil with Mobil 1 synthetic every 4,000 miles until the car reached 100k miles and since then I've changed it every 5,000 miles. This car has never seen anything other than a Nissan oil filter, and got a new one with every oil change.

On 6/6/05 while I was driving to work (in Texas), a lady in the lane to my left going the same direction as me swerved into my lane to avoid someone crossing over the center line into her lane. The car sustained body damage to the left front and also on the right side as the car careened into the safety rail on that side. I took the car back to the dealership and it had about $4,500 worth of bodywork repairs done. Since then I've driven the car over 100k miles and while the front bumper sags a bit, the accident didn't adversely impact the way the car drives and you generally can't tell it was in an accident. I drove the car up when we moved to Maryland in mid-2006 and it has been up here since, after spending its first three years in Central Texas.

The car has been modestly modified for performance, fuel economy, and reliability. In August of 2004 I bought and installed a Hotshot header (exhaust manifold). These cars are known to have trouble with the stock exhaust manifold catalytic converter breaking up and being sucked into the engine which causes catastrophic engine failure. Changing to the aftermarket header alleviated that risk altogether. In 2013 the Hotshot header rusted out around the bottom midpipe flange and I purchased a like-new NISMO header and installed it. The O2 sensor that was located inside the stock manifold has been relocated behind the cat in the midpipe using a DC sports extender harness that uses the stock car and sensor harnesses (no wires were cut) and I replaced the O2 sensor when I installed the NISMO header. The car has passed MD state emissions inspection every other year, as required.

In December of 2004 I bought and installed an aftermarket Stromung stainless steel exhaust. The Stromung is a top quality piece with a nice exhaust note, and a highly desired part. I also installed an AEM cold air intake and solid motor mount inserts that eliminate "wheel hop" when the front wheels spin. I installed a lightened crank pulley as well.  Other than those external engine mods the car is largely stock.


Recent maintenance includes:

New brake rotors and ceramic pads and bled the brakes in April of 2014.

In August of 2013 I replaced the battery.

In the winter of early 2013 as I was driving home from work the serpentine belt broke. I took the car to the Nissan dealer and they replaced the belt as well as drained the cooling system and replaced with new coolant.

In December of 2012 when the car had 120k miles on it, I had new Bridgestone Potenza RE970 ultra high performance all weather tires installed on the car at Costco. These tires are very highly rated by TireRack and I've found them to handle really well even in wet weather with good ride quality. The tires were rotated at 127,500 miles and now have about 10k miles on them.

In the summer of 2012 an air conditioning line ruptured and the A/C lost function. I took the car to the Nissan dealer, where they replaced the hard line and re-charged the A/C. The air conditioning cools as good as new now.

The OEM headlights had become pretty clouded and one of the driving lights didn't function so this spring I replaced them with new TYR complete headlamp assemblies. I also had a brake light out so last month I replaced both brake lamp bulbs in the rear.


The car is over 10 years old and has over 100k miles on it so it isn't perfect. The front end has paint chips, particularly on the hood. The windshield has minor chips and scratches typical of a car this age.  There is a small, barely noticeable dent on the driver's side rear quarter panel that has been there since the day my son was born (long story). The driver's side door has some bubbling on the front edge down low which indicates rust underneath (pictured). Besides that the car doesn't show obvious signs of rust. The stock radio functions fine but the CD player ate the last CD I put in it, so I'd assume that doesn't work.

Overall the car has served me very well and should have a lot of good years left in it with continued diligent care. As I said, it is great fun to drive.  Blue Book value for "good" (defined as better/worse than 50% of the used cars out there) condition is $3,250.  This is a NO RESERVE auction and the car will go to the winning bidder at the end of the auction. 

Car is located in Maryland and I have clear title in hand.  Car is described accurately herein but is for sale as-is, where-is.  I am willing to work with the buyer's chosen transporter, but buyer is responsible for any and all shipping fees.  $500 deposit due via Paypal within 24 hours of the end of the auction.  The balance is to be paid in cash at the time the vehicle is collected. 

Auto Services in Maryland

Trick Trucks & Cars ★★★★★

New Car Dealers, Automobile Parts & Supplies, Truck Equipment & Parts
Address: 8825 Annapolis Rd, Berwyn-Heights
Phone: (301) 918-4628

Suttons Auto Repair ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 3481 Pike Ridge Rd, Owings
Phone: (410) 956-2390

SPRING AUTOMOTIVE ★★★★★

Auto Repair & Service
Address: 24641 South Point Dr, Poolesville
Phone: (703) 957-4252

Sloan Services Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 1735 E Joppa Rd, Loch-Raven
Phone: (410) 668-1100

Salisbury Towing ★★★★★

Auto Repair & Service, Towing
Address: Fairmount
Phone: (410) 749-0089

R & Z Auto Sales ★★★★★

New Car Dealers, Used Car Dealers
Address: 6521 Belair Rd, Perry-Hall
Phone: (443) 449-5112

Auto blog

Nissan to give Qashqai the Nismo treatment

Sat, 30 Nov 2013

Nismo is on a bit of a rampage lately. Once consigned to the fringes, Nissan has taken its performance sub-brand into the mainstream and let it loose on a whole mess of its products. The Juke Nismo was followed by a 370Z Nismo, and in Los Angeles, we saw the GT-R Nismo, Sentra Nismo concept and Juke Nismo RS.
So what's next from Nismo? According to the latest intel from across the pond, Nissan is working on a tuned version of its new Qashqai. Car magazine is reporting that the larger crossover will get the same 1.6-liter turbo four as the Juke Nismo, but with the RS model's 212-horsepower out and not the "base" model's 197. Expect all the other bells and whistles applied to transform a Nissan model into a Nismo one to apply as well.
If the Qashqai name doesn't ring any proverbial bells for you, that's alright, because it's only sold overseas, where it's one of Nissan's most popular models. The crossover (which looks like the new Rogue but is a substantially different model) was recently completely replaced, with engine options ranging up to 150 horsepower - so the jump to over 200 should make for quite a different beast altogether. Whether a parallel or subsequent program to give the Rogue a similar treatment is another matter, but given the pace at which Nismo seems to be running, that may only be a matter of time.

2014 Nissan Maxima gets new Limited Edition model, pricing

Fri, 30 Aug 2013

With a new Maxima expected to debut next year for the 2015 model year, Nissan is only making small changes to its big sedan for 2014. Buyers looking to get behind the wheel of Nissan's "4-Door Sports Car" will be happy to know that the base price for the 2014 Maxima carries over from 2013 starting at $31,000 (*excluding the $810 destination charge).
Aside from two new colors, the only change to the base Maxima S is the addition of a new option group. Sounding very similar to the Sport Package available on the SV, the $750 Limited Edition Package adds smoked Xenon headlights, dark-accented 18-inch wheels, a rear spoiler and fog lights. Stepping up to the SV trim level, the Maxima now comes standard with a rearview camera, Xenon headlights and a seven-inch screen, but its price has also been increased by $850, so it starts at $34,090. Scroll down for more info on the 2014 Maxima.

Nissan gives us the business on the art of clay modeling

Sat, 06 Apr 2013

The team from The Dashboard recently stopped by the Nissan Technical Center in Japan for a look at what exactly goes into creating a full-scale clay model. While automakers have been using clay bucks for decades, designers and engineers are now combining computer renderings and hand-sculpted clay models to determine how a new vehicle will look in our world. Engineers use specially formulated clay kept warm in an oven to bring the body panels to life. They then coat the clay in a thin plastic film to add body color for the final look.
By the time everything is said and done, workers may have hundreds of hours in the model's creation. So, what happens when the company no longer needs the buck? They get scrapped. Someone comes in and dismantles the whole creation. We presume that action is set to the wailing tears of everyone who had a hand in building the model. Check out the video below for a closer look.