Find or Sell Used Cars, Trucks, and SUVs in USA

Pontiac Fiero With $8,000.00 Custom Body on 2040-cars

Year:1980 Mileage:32000
Location:

Carbon Hill, Alabama, United States

Carbon Hill, Alabama, United States
Transmission:Manual
Vehicle Title:Clear
Engine:v6 mid engine
Fuel Type:Gasoline
Condition:

Used

Year
: 1980
Number of Cylinders: 6
Make: Pontiac
Model: Fiero
Trim: fast looking
Options: Sunroof, Cassette Player
Power Options: Air Conditioning, Cruise Control, Power Windows
Drive Type: 4 speed
Mileage: 32,000

pontiac fiero with $8,000.00 custom body. 
Has a v6 mid engine in rear of car. sun roof, cold ac, v6 has been rebuilt. need a starter, a battery, and a window on passage side door. And a little tlc and this car will be ready to hit the road and be fun to drive. This car is a looker, everywhere i been in the car people would stop to look and ask about it. Good on gas. new tires. I got about $10,000.00 dollar in this car. The custom body is made in England, and there are very few of them in the USA. Can put a v8engine and also g6 speed trans into this car with kit. you can buy the engine and trans kits on line from England.  The custom body is design after a Lotus, but not the same. This is a very fun car to have and drive. you will get a lot of looks with this car. The body is all good and the car need very little to drive. this is truly a dream car to have. very sporty, women really like this car. Fun to have a one of a kind, that no one has seen before. good luck biding. This is a two seater.   :) very nice to go on dates in this car. you can see that it is a sexy car.

Auto Services in Alabama

Welch`s Muffler ★★★★★

Auto Repair & Service, Mufflers & Exhaust Systems, Truck Service & Repair
Address: 8670 Highway 31 N, Kimberly
Phone: (205) 647-4630

Tire Pro Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 5755 Milgen Rd, Smiths
Phone: (706) 563-6234

Tim`s Auto Sales ★★★★★

New Car Dealers, Used Car Dealers
Address: 24545 Highway 69, Sayre
Phone: (205) 995-9002

The Drive Shop ★★★★★

Automobile Parts & Supplies, Truck Accessories, Tire Dealers
Address: 6897 Gadsden Hwy, Alton
Phone: (205) 533-8785

Swedish Autotech Inc ★★★★★

Auto Repair & Service, Used Car Dealers, Automobile Parts & Supplies
Address: 4123 Government Blvd, Whistler
Phone: (251) 661-6070

Steve`s Muffler Service ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Mufflers & Exhaust Systems
Address: 1325 Federal Dr, Maxwell-Afb
Phone: (334) 625-6085

Auto blog

Lutz says Washington killed Pontiac, next G6 was to be ATS derivative

Tue, 29 Oct 2013

How many people think Buick or GMC should have gotten the axe instead of Pontiac? You can't see it, but I'm raising my hand. Autoweek reports that former Vice Chairman of GM, Bob Lutz, has indicated that things didn't have to end up the way they did.
"The Feds said, 'Yeah, how much money have you made on Pontiac in the last 10 years?' and the answer was, 'Nothing.'"
In a talk given at the Petersen Automotive Museum for the Inside the MotoMan Studio series, Lutz says "The Feds said, 'Yeah, how much money have you made on Pontiac in the last 10 years?' and the answer was, 'Nothing.' So, it goes. And when the guy who is handing you the check for $53 billion says, 'I don't want Pontiac, drop Pontiac or you don't get the money,' it doesn't take you very long to make up your mind." Lutz even added that the next-generation Pontiac G6 would have benefitted from the rear-wheel-drive platform of the Cadillac ATS. How awesome would that have been?

GM knew about fatal Chevy ignition problem decade before recall

Fri, 21 Feb 2014

Well, this is not good for General Motors. Following a report last week that GM was recalling 778,000 Chevrolet Cobalt and Pontiac G5 compacts over concerns that the ignition could switch out of the "run" position without warning, USA Today reports that the Detroit-based behemoth knew about the issue, which affected 2005 to 2007 Cobalts (the Cobalt shown above and in the gallery is from 2010) and 2007 Pontiac G5s, all the way back in 2004.
The information comes from a deposition in a civil lawsuit against GM, obtained by USA Today, which claims that a GM engineer experienced the issue while the then-new model was undergoing testing. The issue was "solved" when a technical service bulletin was issued in 2005, informing dealers to install a snap-on key cover on the cars of customers who complained about the issue. According to the Cobalt's program engineering manager, Gary Altman, the cover was an "improvement, it was not a fix to the issue."
The case where the depositions were made was from 2010, and involved Brooke Melton, a 29-year-old pediatric nurse in Georgia who was killed on her birthday. At the time, police claimed she was going too fast on a wet, rural road, although it later came out through the black box that her car's ignition had come out of the "run" position at least three seconds before the accident (the max amount of time a black box records before a wreck), disabling her airbags, power steering and anti-lock brakes. According to USA Today, police said Melton was "traveling too fast for the roadway conditions," although it's impossible to know if she'd have been in the wreck, which injured the occupants of another vehicle, had her 2005 Chevy not shut off. GM settled the Melton family's case, although the details remain confidential.

CNN chronicles young girl building Pontiac Fiero

Fri, 26 Oct 2012

At fourteen years of age, Kathryn DiMaria has already done what many self-proclaimed gearheads won't even attempt in their lifetimes. The Dearborn, Michigan teen is rebuilding a car from the ground up.
The intrepid youngster asked her parents when she was just twelve to start a Pontiac Fiero project, even offering to pony up all the funds herself. Father, Jerry DiMaria only expected the project to last a few months, but two years later, Kathryn is still at it. In this CNN video, the two are at Maker Faire (a DIY festival) rebuilding a 3.4-liter V6 engine out of a Chevrolet Camaro to replace the 2.8-liter mill found in the Fiero.
The whole family hast pitched in, with Kathryn's mother teaching her how to sew in order to complete the interior, father Jerry providing much of the technical know-how, and even her sister is chronicling Kathryn's progress through photos. Jerry even started a thread in a Fiero forum which has been live for two years and is now 22 pages long. Of the project, one forum member wrote, "welcome to the madness."