Ram 3500 169" 4x4 Laramie Longhorn Edition, 6.7l Diesel, Nav, Loaded!!!!!! on 2040-cars

Auto blog

Chrysler recalls AWD 300, Charger, Ram 1500 over ZF transmission

What do the Chrysler 300, Dodge Charger and Ram 1500 all have in common? Yes, they're all Chrysler products, and two of them are based on the same platform. And we're sure you could find more similarities between them all, but the common trait we're looking at here is that, while they all come standard in rear-drive form, they're also available with all-wheel drive. And it's the transmission in those models that's the subject of the latest recall notice issued by the National Highway Traffic Safety Administration.
The output shaft on the eight-speed automatic transmission supplied by ZF to Chrysler for the AWD versions of the 300, Charger and Ram 1500 is apparently prone to fracture. That in the end could leave the vehicle without power and could, according to the NHTSA investigation, increase the chance of a crash. The vehicle could also roll away if even if left in Park without the handbrake applied.
That's why Chrysler is calling in 4,194 examples of those three models from the 2013 model year. Dealers will be responsible for inspecting the transmissions and, where necessary, replace the entire unit. See the full recall notice below for all the details.

Ram flubs ProMaster cargo capacity

The Ram ProMaster is going to look a little smaller on the inside, at least by way of its specification sheets, despite the sheet metal staying the same.
When Ram originally published the cargo capacity for its van, it simply did a direct conversion from the European rating of 15 cubic meters to 530 cubic feet. However, that didn't take into account the standard way internal measurements are calculated for the US. While the trucks have been on sale since October, the automaker just noticed the problem, and it's working on a revised figure. According to Automotive News, the new carrying ability for the ProMaster is likely between 450 and 475 cubic feet.
The difference stems from two standards for measuring capacity. In Europe, the entire internal area is determined and then obstacles like seats are subtracted from it. That means areas where freight could never go, like on top of seat backs, gets included in the figure. In the US, only the area where goods could actually fit is included, which leads to lower specs with no actual change in space.

Ram goes all-in on SAE J2807 tow ratings [w/video]

Thanks to the Society of Automotive Engineers (SAE), when car shoppers look at horsepower and torque figures on vehicles, they know that all the automakers are calculating them the same way. However, that isn't the case when it comes to truck buyers and max towing capacity ratings because each company figures the value differently. That practice finally changes with the SAE's standardized J2807 system, though, and Ram Truck is the first one to apply the new test procedure to its entire light- and heavy-duty pickup range.
All models of the Ram 1500, 2500 and 3500 use the new, standardized rating for the 2015 model year, but buyers might not notice too much difference. According to the company, in 99 percent of cases the max towing weights are unchanged or even improve slightly from last year. That's a strong result compared to the 2015 Chevrolet Silverado and GMC Sierra that are seeing few increases but mostly decreases under the new testing procedure.
"For too long, an uneven playing field existed and towing capacities went unchecked. We're happy to be the only pickup truck manufacturer to align with the SAE J2807 towing standard across our pickup truck lineup," said Mike Cairns, director of Ram Truck engineering, in the company's announcement of the new specs.