Toyota Supra Twin Turbo Hatchback 2-door on 2040-cars
New Bedford, Massachusetts, United States
Engine Work: 2JZ-GTE (ALL ENGINE WORK DONE IN 2010) -CP .040” Oversized Pistons with .200” wrist pins attached to Carillo H-beam HD Connecting Rods with CARR bolts, floating on a rebalanced stock crank with Clevite Bearings. -Clevite Bearings for the Crankshaft as well. -New Oil Squirters for block -New Oil Pickup, New OEM oilpump, Ceramic Coated Oilpans (1 & 2) -ATI Crank Dampener -ARP Studs for the Stock Mains Caps -ARP L19 Headstuds with a stock headgasket -Port and polished Head from HeadGames with +1mm Ferrea oversized valves, sitting between Crower Springs and Retainers, under a set of HKS 264 Cams. -PWR radiator with stock shroud and HKS radiator cap, with hard medal upper hose and new rubber lower hose, with TRD cap. Antifreeze is the Toyota Red. The waterpump is also new. -There is no stock oil sandwich cooler installed, since I have a 19-row Earl Cooler instead with sandwich plate(currently off the car). Oil temperature hovers at 200-220F. -Timing Belt is a Gates belt with a Stock Cam gears, rewelded timing gear, with a SP Billet Belt Tensioner. -Timing belt and serpentine belt tensioners are both new, 4000 miles on them. The shock absorber for the serpentine belt is installed. -Stock Intake Manifold , stock throttlebody with 1000CC Rochester Injectors with Pigtails, running in conjunction with a Titan Fuel rail with 2 inlets, 1 middle return line to a Fuel Labs AFPR. The system is fed by a newly rewired Triple DENSO fuel system, with only 2 run at the same time. The system has 2 -6AN feeding to a single -10AN, and a -6AN return. -The turbo system consists of a Genuine HKS Manifold (black ceramic coated and wrapped)and HKS GT wastegate, with AN fittings throughout the air system: BOV, AFPR, Wastegate, Boost Controller(AEM 1 Controlled). The Turbo is a Comp CT367 or 67mm water-cooled with a .7 exhaust housing, with a 3” to 4” WOTM SS downpipe, midpipe and BoostLogic 4” Exhaust, with v-bands at each connection. The wastegate has a 2.5” dump tube that dumps the exhaust to atmosphere(aka LOUD). -A greddy catch can with 2 -10AN breathers welded to the valve covers with an atmospheric output line is what the system consists of. - Intercooler is a Greddy 3-row with T-bolt clamps throughout the system -Infinity 10 EMS ECU. 3.5 Bar AEM Sensor, AEM Temperature sensor, AEM Boost Solenoid, AEM Fuel Pressure Sensor, and Traction Control Enabled.-There is a Flex fuel sensor installed, and connected to the Infinity, but there is not E85 tune currently on the map. -Defi Gauges on the A-pillar with the Defilink system: 2-gauge pod but I have 3 gauges. Oil temperature, oil pressure and EGT. Egt is located at the manifold’s collector. Chassis and Steering Mods: -New power steering Pump, New Rack and Pinion (from Curt at Elmhurst), aftermarket power steering cooler on the driver’s side duct( never boiled while road racing in Texas, that’s good!) with Power Enterprise bushings for the rack(if I recall correctly), and R2 bushings for the Control Arms are newly installed as well(front). The fluid is Castrol ATF. -JIC forged inner tie rods with Megan outer tie rods with heim joints. -The suspension is a 4000 miles old, KW 3-way Variant that rides really well. Both sway bars are stock. -Wheels are new 18x9.5F and 18x11.5R Forgestar F14 in Matte black, with nitto NT05 tires all around. 275/35/18 F and 295/30/18 R. The car handles really well with the Lance Alignment and is a joy to drive. -New wheel bearings were installed 4500 miles ago, all around(might as well since everything else was new) -Brakes are 14” Stoptech 4-piston ST-35 Calipers,Front and Back, with a set of HAWK HT-10 racing pads(front) and Axis pads(rear) for the street. Fluid is Motul 600 . SS braided lines are used for the system as well as 8000 miles on a brake master cylinder. -Transmission is a rebuilt 6-speed Getrag with many new components, but not all. Gears have been changed, forks, all synchros, and bearings. It drives amazingly! Fluid is the stock V160. The clutch is a unsprung RPS Carbon Carbon with the CNC machined pressure plate and heavier chromoly flywheel. The slave and master cylinder have about 8000 miles on them as well. The shifter is new, the fork thing that supports it is new with the CNC bushings. The TRD transmission mount holds it steadily in place. The clutch, throughout bearing, release fork, c-clips, all have 4500 miles on them and the car has been drag raced at the track once with only 2 launches. Ran a best of 11.0 at 130 2 years ago. daily driving this clutch is much easier than single plate clutches. -The starter is a rebuilt Denso unit. - The rear end has a TRD Differential, with stock bushings. It is better than the stock Torsen Unit. Interior: -Black Interior with 2 Sparco Torino 2 seats in Blue. The rear seats are the stock black leather seats with a camera mount installed behind them, which can be used when the rear seats are locked down. The kenwood head unit has a kenwood Amp to power the speakers and tweeters in the car. - The defilink system with 2 gauges on the A-pillar. A Momo Jet CF steering wheel with horn is used. A BOSS cruise control hub is in place, but I removed the cruise control so it does not work currently, but it was working prior to removal. -The interior panels for the driver, center console was originally the easily scratched rubbery material, so I removed them and sprayed them with this Storm Gray color.It looks nice and many other members have done the same color from SF.com . There is no passenger airbag, but a panel sits in its place. OEM style. -The HVAC system, A/C, heater, etc, all work great. ICE COLD A/C! Even my 2006 daily car cant get this cold! -Tail lights are the 93-96 style, and so are the headlights. I opened them up and sprayed them the same color as the interior pieces, so they have the 97-98 loook! The sidemarkers are also the 97-98 model style. The driving light is a blueish white HID and the foglights are a light yellow to slightly green color. Exterior: The car is painted Alpine Silver, and it has never been repainted. All the Vin numbers are there. This car does have some scratches, mostly front bumper, a few small dings/ chips .
Toyota Supra for Sale
Toyota supra turbo(US $2,000.00)
Toyota supra(US $8,000.00)- Toyota supra supra hks gt2835 6-speed(US $10,000.00)
Toyota supra twin turbo hatchback 2-door(US $13,000.00)
Toyota supra hardtop(US $2,000.00)- Toyota supra twin turbo hatchback 2-door(US $20,000.00)
Auto Services in Massachusetts
Willy`s Auto Supply ★★★★★
Wheel Dynamix North ★★★★★
Weymouth Honda ★★★★★
Westgate Tire & Auto Ctr ★★★★★
Westgate Tire & Auto Center ★★★★★
Westgate Tire & Auto Center ★★★★★
Auto blog
Toyota settles complaints with states Attorneys General for $29 million
Thu, 14 Feb 2013Toyota announced today that it has reached a settlement with the Attorneys General of 29 states and one US territory that will resolve their complaints relating to recalls performed by the automaker from 2005-2010, including those related to sticky accelerators and malfunctioning floor mats that may have contributed to cases of unintended acceleration.
The settlement includes a payout of $29 million to be divided among the states and US territory, as well as a commitment from Toyota "to take steps to make vehicle information more easily accessible to consumers to help them operate their vehicles safely and make more informed choices." The settlement also has Toyota continuing its rapid-response service teams and quality field offices that were put in place shortly after the largest of the recalls from 2010, as well as a "range of customer care amenities for owners of vehicles subject to certain recalls," though the press release below isn't specific about what those amenities might be.
This settlement marks the second major step in the last few months that Toyota has taken to settle legal disputes surrounding the unintended acceleration recalls, the first being a $1.4 billion settlement to address economic loss suffered by owners of current and past Toyota vehicles that may have lost value on account of these recalls.
Cosworth teases upgrades for Subaru BRZ
Mon, 19 May 2014Subaru may or may not produce an STI version of the BRZ. Things seem to go back and forth on the subject. But Subaru Tecnica International isn't the only company with a history of tuning Subies. So does Cosworth, and now the British racing firm appears to be turning its attention to the BRZ and its Toyota- and Scion-badged siblings.
For those unacquainted, Cosworth is more than your average tuning company. It's a racing firm first and foremost, having made F1 engines under its own name as well as Ford's (chief among them the all-conquering DFV 3.0-liter V8 of 1960s and 70s fame), not to mention engines for Indy, rally and even high-performance, road-going versions of the Ford Sierra, Chevy Vega and Mercedes 190E. The list goes on and on, but you get the point.
Now withdrawing from Formula One, Cosworth is focusing its attention on tuning road cars again with the launch of the Cosworth Power Package line, the first of which will focus on the Toyota GT86 (aka Scion FR-S) and Subaru BRZ. We don't know just yet what will be included in the packaged dubbed FA-20, but from the video teaser below, it seems there'll be upgrades to the exhaust, suspension, aero and - if we're lucky - maybe a super- or turbocharger for the 2.0-liter flat-four engine. We'll have to wait and see, but we get the feeling that with Cosworth on the job, it'll be worth the wait. Check out the minute-long video below in the meantime.
Toyota GT86 CS-R3 rally car presages for-sale customer racecar
Thu, 31 Jul 2014Rallying may enjoy a very strong association with all-wheel drive, but it wasn't so long ago that the World Rally Championship was populated by cars that slipped and slid across gravel and tarmac using rear-wheel drive. One of those was the Toyota Celica. While the little Celica eventually joined the gravel-spewing masses with an all-wheel-drive rally car, Toyota is returning to its rear-drive rally roots with a modified version of the critically acclaimed GT86.
Called the CS-R3, the new model boasts all the necessary changes to turn the diminutive twin of the Scion FR-S and Subaru BRZ into a car capable of tackling the tough, twisting paths that are so routinely conquered by the world's rally cars. That means, of course, the CS-R3 has gotten a power bump.
Expected output sits between 240 and 250 horsepower, thanks to a new racing exhaust and manifold, as well as other changes. The ECU has been replaced with an item a bit more suited to racing, while the compression ratio has also been adjusted to boost the output.