1958 Chevrolet Other Pickups None on 2040-cars
Vancouver, Washington, United States
1958 Chevy Apache step-side pickup truck. He has a lot of money into it, but our
reserve is very fair. The foam board was put in the one pic to cover the license plate. Now... let's get down to
specifics:
Engine - lightly built Chevy 383 stroker. My son bought the engine as a long-block, and it was built by a local
engine builder located in Everett, WA. It is not a racing engine, but it has a great sound to it with a mild cam
and runs flawlessly. All new headers, intake manifold, Holley carb, water pump, alternator, and a complete new
exhaust system. The motor has approximately 1000 miles on it, so it is just about broken in. No leaks anywhere!!
Transmission - TH400. Shifts great and also has new driveshaft hooked up to it.
Chevy rear end with a Ford front. Disc brakes up front and drums in the rear. The disc breaks really bring it
down to a stop! It unfortunately does NOT have power steering.
The body is in very nice shape, but there is one very light ding on the passenger front fender that you can notice
when you look for it. It can probably be removed with the right equipment. We do not know if there is any bondo
in the body, as my son bought the truck but then had to replace the motor. The lines on the body are very straight
and no waviness when you look down the sides. The paint is not perfect, but we would probably grade it an 8 on a
10 scale. He was told it was originally a Texas truck, but we never confirmed that. He also had new wipers
installed, and they do work. It also has a new wood bed installed out back.
The interior is extremely comfortable with what we think is light cream faux-leather and really contrasts against
the black body. It really pops! New Auto Meter gauges, but the speedometer is a little off. All side windows are
new glass. It has a Kenwood CD/bluetooth sound system with (4) speakers behind the seat.
Chevrolet Other Pickups for Sale
1956 chevrolet other pickups(US $15,920.00)
2004 chevrolet other pickups(US $25,280.00)
1990 chevrolet 3/4 ton pick-up truck $9,600 negotiable(US $9,600.00)
1955 chevrolet other pickups base(US $15,600.00)
1934 chevrolet phaeton street rod $49,950 (US $49,950.00)
Clear(US $47,000.00)
Auto Services in Washington
Yire Automotive Care ★★★★★
Woodland Auto Body ★★★★★
University Place Tire & Auto ★★★★★
Town Chrysler Dodge ★★★★★
Superior Auto ★★★★★
Sparky`s Towing & Auto Sales ★★★★★
Auto blog
Refreshed 2014 Camaro confirmed for New York debut
Thu, 07 Mar 2013We've already seen leaked specs and potential spy shots, but the refreshed 2014 Chevrolet Camaro will make its official debut at the New York Auto Show in a few weeks.
Besides a tweaked exterior and the possibility of a high-output LS7 under the hood, we really don't know much else about the 2014 Camaro, but here's hoping for an improved interior, too.
In addition to the refreshed Camaro, Chevrolet will also be showing off the recently introduced Chevrolet SS, making its debut on the auto show circuit, and we'll also get our first look at the C7 Corvette coupe and convertible side-by-side.
Camaro spy shots show subtly different grille, front fascia
Sun, 03 Feb 2013It looks like there some changes in store for the Chevrolet Camaro - the only thing is that we just don't know what Chevy has up its sleeve. Looking at these spy shots, we'd initially be inclined to think that there is just a minor facelift or a new special edition, but upon closer inspection, there are a few oddities about this car that definitely have us intrigued.
The most obvious difference on this prototype is the slightly restyled front fascia with a smaller lower air inlet and the two-bar grille. Then we get to some of the car's mysterious details. For starters, this fascia has the SS vent above the grille, but it looks to be blocked off. Granted this could just be a one-off piece used for testing. What really piqued our interest was at the rear of the car where it has quad exhaust outlets that are used on the ZL1. Could this be the LS7-powered Camaro that we reported on back in December?
At this point, your guess is as good as ours as to what we're looking at here, so let us know in the comments what you think this could be.
GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch
Mon, 04 Feb 2013According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.