1968 Chrysler Newport Custom 383 Auto on 2040-cars
Newburgh, New York, United States
|
Please Read all of the Details
Recent things done (Engine and Suspension) -383 Motor rebuilt by Previous owner, Flat Top Pistons (2008), had heads off no carbon or black at all on the pistons, walls were in excellent shape. -Heads re done, Put 346 heads on because they have hardened seats, full valve job, magnafluxed. Heads came off of a cuda, and I am almost positive these are six pack heads. -Comp Cams k-21-223-4 just put in May 2014. Duration 268/280, Lift .477/.480, Double roller Timing Chain, Heavy Springs with damper, 10 degree locks. -Edelbrock 1805 AVS Thunder Series 650 CFM -Performer Rpm Intake -Hedman Shortie Headers -New water pump,thermostat, thermostat housing -New Aluminum Radiator, car doesn't get above 160 even in 90 degree temps -New Belts, Hoses, Spark plugs, spark plug wires, distributor cap -Pertronix electronic ignition kit and Pertronix Flamthrower 2 Coil -New fuel pump, fuel filter -Only thing not replaced was oil pump. -New motor Mounts -New tranny filter and pan gasket -New Shocks, rear has load levelers -New upper and lower ball joints -New Wheel cylinders and brakes -Brake lines new accept rear one in good shape. -Fuel lines in good shape -New Gas tank and straps Recent Things Done (Body and Interior) -All trim removed fixed rust on lower fenders and quarters(Rust eliminated but body work not perfect) -Roof was pitted filled in with body filler(Not perfect but much better) -Any rust spots were treated with rust mort -Entire inside of the car inside the doors, and trunk were treated with rust mort then painted with por 15 -Frame was coated on the inside with eastwood frame coating -New Carpet -Heater core box rebuilt with new motor and heater core -Seats are original but have seat covers as they aren't in the best of shape more the rear seats. -Aftermarket Fuel, Oil Pressure, Temperature, and Rpm -Rear window had some rust on the upper driverside corner, removes all old weather stripping treated rust with rust mort, painted inside the grooves with por 15 resealed and put chrome back on, chrome does not sit flush as per the repair, had to clear silicone around the rear window as well. -Trunk repaired with trunk extension and some holes that were in the trunk were fiber glassed, The trunk does still leak but I have the new trunk seal. -Firewall did have some minor holes in it cut and patched with gorilla hair. - Where the heater core box connects to the corner side of the firewall on the passenger side was rusted and needed to cut a small piece out, it is currently sealed up and there is no piece connecting from the firewall to the heater core box where outside air would normally rush in. The heat works great as well as the defogger. - It also has a small hi torque starter - It does leak a small amount of oil after the car has been ran for a while, maybe a few drips, oil level has not gone done and pressure is always around 60 - It does not have a full exhaust. I have some flex pipe running off of the headers into glasspacks with turn downs. -Manual Choke cable for carburetor - The transmission needs a bigger stall convertor to really feel the power after the engine modifications. - Also the rearend has the original highway gears 2.96 I believe, will most likely benefit from installing higher gears(3.55 etc...) - The speedometer is off but I have a new speedometer cable. - All the lights work, blinkers, brake lights, reverse lights(Reverse lights are hooked up to a switch, but I still have the steering column piece) - Also I have a set of fuses and extra bulbs. -I am also including a New set of Hedman 78030 Long Headers. Shorties are on there now. -Has original bumper jack and has a spare but the spare needs a new tire but the tires on the car are brand new cooper cobra 225 70 14. -I am including all of the chrome which is not on the car, the head liner metal rods and any other parts I can find that I have that were not used. - The car starts up and drives with no problems, the car will need body work, some electrical for the gauge cluster and radio. -The car is being sold AS-IS -Buyer is 100% responsible for picking up or shipping |
Chrysler Newport for Sale
1962 chrysler 300 2 door hardtop original condition
1967 chrysler town & country 9-pass wagon 440 tnt/tqflite/8 3/4 rear runs great!
1951 chrysler windsor deluxe newport 2 door hardtop rust free body
1964 chrysler newport convertible big block clean,rust free western car(US $10,000.00)
1980 chrysler newport-318, runs great!rebuilt trans, lean-burn is bypassed,(US $1,995.00)
Auto Services in New York
Wheel Fix It Corp ★★★★★
Warner`s Auto Body ★★★★★
Vision Kia of Canandaigua ★★★★★
Vision Ford New Wholesale Parts Body Shop ★★★★★
Vince Marinaro Automotive Inc ★★★★★
Valu Muffler & Brake ★★★★★
Auto blog
Dodge Viper saved from crusher by students, but will it last?
Tue, 16 Sep 2014The saga of the Washington state community college hoping to keep its allegedly pre-production Dodge Viper out of the maw of the crusher is going strong. Not only does the school still have the car, but there's a chance that the college might even get to keep it.
The whole situation flared up in March when the South Puget Sound Community College in Olympia, WA, received a notice from Chrysler Group that requested that the school's Viper be destroyed. The automaker had loaned the muscle car to it about a decade ago to use for educational purposes in its auto tech classes. With the Dodge growing long in the tooth, "it is unlikely that these vehicles offer any educational value to students," the company said in its press release on the matter.
However, the college balked at destroying its Viper, despite the fact it had signed a contract with Chrysler Group to do so. The school further claimed that its car was incredibly special because it was a pre-production example and just the fourth one made back in 1992. Although, as we pointed out at the time, the photos of the school's vehicle showed a coupe that looked like a newer Viper GTS.
Chrysler highlights Mopar lineup for SEMA
Wed, 30 Oct 2013SEMA is all about aftermarket parts, and in Auburn Hills that all comes down to one name: Mopar. After having previewed its lineup for this year's Vegas tuner expo earlier this month, Chrysler has now revealed what may not quite be its full dossier of modified show cars, but a good portion of them.
All told Mopar is preparing 20 vehicles for display at SEMA this year. Among them you'll find the Ram Sun Chaser, a 1500 Quad Cab show truck kitted out in two-tone orange and black paint, a roof rack for surfboards, onboard shower and convertible tailgate. The white Fiat 500L is called the Adventurer and is modified for a more rugged look that could hint at the upcoming crossover version. The Jeep Cherokee Trail Carver upgrades on the Trailhawk package with everything from roof basket to rock rails. To counterbalance the off-roaders, there's also a modified Chrysler 300S with a deep black paint job, special grille, Varvatos-edition wheels and more.
All four concepts details so far have Katzkin interiors as well, and there's also an unspecified Dodge Durango with a storm-trooper look in the gallery above. But for more details on what Mopar has installed on the Ram, 500L, Cherokee and 300, you'll want to delve into the press release below.
Mopar celebrates 50 years of the 426 Hemi
Thu, 09 Jan 2014Think of Chrysler performance and the names Mopar and Hemi are bound to come to mind. Chrysler and its Mopar performance parts division first introduced the original Hemi (so named for its hemispherical combustion chambers) back in 1951, celebrating its 60th anniversary in 2011. But it was thirteen years later - 50 years ago - that the Pentastar automaker rolled out the most iconic Hemi of them all: the Gen II 426.
The massive 7.0-liter V8 engine instantly became a muscle car icon and went on to become a favorite of racecar constructors. Two competition versions of the Gen II 426 Hemi were made: one for the track and one for the drag strip, and both went on to illustrious strings of victories. The race engine first debuted at the 1964 Daytona 500 where it powered Richard Petty's Plymouth to the checkered flag and on to the NASCAR championship.
Meanwhile on the drag strip, the Gen II 426 Race Hemi propelled Don Garlits past 200 miles per hour and down the quarter-mile in 7.78 seconds. Changes in NASCAR regulations meant that Chrysler devoted the engine to NHRA drag racing, and to this day the Gen II 426 Race Hemi is still used in Funny Car and Top Fuel dragsters.