1968 Dodge Coronet Rt on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Dodge Viper GTS-R goes back to old-school livery

The Dodge Viper may have been around now for over 20 years, but as far as racing achievements go, 2000 was its finest season. That's when it won the Rolex 24 at Daytona, the GTS class trophy at the 24 Hours of Le Mans and its second consecutive title in the American Le Mans Series.
Since then, SRT Motorsports hasn't quite had the same success, withdrawing from Le Mans this year and shedding the Dodge name and its emblematic red and white livery for the SRT badge and a silver snakeskin theme. But now that the Viper is back under the Dodge banner, so too is the racing team returning to its classic livery.
Starting from the six-hour race at Watkins Glen next week, both the No. 91 and No. 93 Viper GTS-Rs will wear the red base color with twin white racing stripes that its more accomplished forebears wore on circuits around the world. And with it, maybe the Viper will return once again to the winner's circle at home and abroad.

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.