For sale is a 1937 Ford Coupe I bought about a year ago. I picked it up for a cruise nights/local shows car but found something I like better. It’s an all steel car with great lines and very solid. It has a supercharged Chevy 350, 4 speed, heavy clutch and a Ford posi rear end with a 411 or 457 gear set in it. Since I bought it I put a new Holly carb on it, had the supercharger, a B&M 144, rebuilt by Dyer’s Blower shop. I also had some other work done on it by Midwest Hotrod. I had them put in a new aluminum radiator, the old one had calcified. They rebuilt the rear brake cylinders and bled the lines. The trunk had bubbles in the paint along the bottom edge so I also had Midwest fix that and repaint it and some other areas that need a minor touch up. The mechanic said he thinks they put in an AMC front end in the car. As far as the rest of body goes, it’s very sturdy and rust free. I don’t know much about the history of the car. I’m guessing the car was a 1970’s build, judging from the interior work and style. It works but it’s antiquated. Looks like maybe a 1970’s GM dash. The car also has a sun roof and an opera seat in the cab. It runs strong. I didn’t get it finished until last fall, so I’ve only put about 50 miles on it since the refresh was done. There’s been a lot of 1937’s on the EBAY site lately, mostly going for $35,000.00 to $45,000.00 This car can easily be taking to the next level and customized more to your personal tastes for much less the difference of site cars and what I’m asking for mine. The only things wrong that I’m aware of is speedometer doesn’t work (I was thinking about digital gauges anyway if I redid the Interior) and if you fill up the gas tank all the way there is a small drip that goes away after a 5 or 10 mile ride. A $500.00 Deposit is due within 48 hours of close of Auction, Payment in full within 7 days of Auction Close via certified funds, or cash. Car needs to be picked up within 15 days of end of auction. Insurance, tags, taxes and shipping fees are the buyer’s responsibility.

Auto Services in Illinois

Woodfield Nissan ★★★★★

New Car Dealers, Used Car Dealers

Address: 700 W Higgins Rd, Hoffman-Estates

Phone: (847) 310-1900

West Side Tire and Alignment ★★★★★

Auto Repair & Service, Tire Dealers, Wheel Alignment-Frame & Axle Servicing-Automotive

Address: 2091 W Station St, Kankakee

Phone: (815) 933-7080

U Pull It Auto Parts ★★★★★

Automobile Parts & Supplies, Truck Wrecking, Automobile Accessories

Address: 4555 W North Ave, Berwyn

Phone: (773) 489-2277

Trailside Auto Repair ★★★★★

Auto Repair & Service

Address: 40W288 Wasco Rd, South-Elgin

Phone: (847) 854-6700

Tony`s Auto & Truck Repair ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Wheels-Aligning & Balancing

Address: 37W415 Keslinger Rd, Batavia

Phone: (630) 306-0266

Tim`s Automotive ★★★★★

Auto Repair & Service, Brake Repair, Tire Changing Equipment

Address: 6505 Main St, Village-Of-Lakewood

Phone: (815) 923-4780

Auto blog

Ford evaluating new Fiesta RS?

Wed, 08 Jan 2014

Word coming in from across the pond has it that Ford is working on developing the business case to create a new Fiesta RS. The development is encouraged by the extremely positive reception the existing Fiesta ST has garnered to date, and the emergence of the above-pictured Fiesta RS WRC rally car, but it'll take more than goodwill to make a more extreme version a reality.
According to Auto Express, a new roadgoing Fiesta RS would almost certainly be based closely on the ST version, albeit with some vital differences. Its 1.6-liter turbo four would be increased from 180 horsepower to somewhere around 230 hp, and that powertrain would be accompanied by lightweight alloys inside blistered wheel arches, a stripped-out interior and possibly lightweight bodywork.
The vehicle's approval would reportedly require a strong business case in Europe, and not just in the UK where Ford hot hatches traditionally enjoy a strong following. It's unclear whether the Fiesta RS would potentially make the transatlantic voyage to American showrooms, but between it and the larger Focus RS, hopefully the Blue Oval wouldn't leave its home market out of the action altogether.

How Ford made its 2015 Ford Mustang safer for toupee wearers [w/video]

Fri, 28 Feb 2014

Ford is ready to tell the story of its 2015 Mustang Convertible, the can't-miss bits being the easier, quicker and quieter roof operation, a more robust roof build for a coupe-like cabin noise, more trunk space, better visibility and reduced in-cabin buffeting. The top release system has been completely redesigned with a single, center-mounted latch on the windshield frame instead of the dual latches of before. The driver can now release the roof without having to lean over into the passenger space, after which the top goes down fully automatically with the press of a button. Ford doesn't say how long it takes to stow, but it's apparently done in half as much time as before, so figure around 8 seconds.
The roof uses a five-bow structure, with the fabric outer and full inner headliner sandwiching ten millimeters of insulation. Detailing work on the top has eliminated "unsightly folds" in the corners when the roof is up and made it more compact when down; its Z-fold assembly is 6.7 inches lower than before at its highest point when put down. Ford says the new electric drive internals make less noise when in operation, and the fully-finished droptop look is achieved with snap-in caps that flank the rear seating and stow in the trunk when not in use (the outgoing Mustang's top was higher and the front when folded and always looked like it was catching air and creating drag).
The compact roof and newly independent rear suspension setup in back means liberated trunk space, 11.4 cubic feet ready to swallow golf bags and tourist swag. You can read a lot more about it in the press release below, check it out in the short video of running footage and learn about the aerodynamic improvements made to the entire Mustang lineup that decrease drag and increase fuel economy.

Ford cranks up '32 Ford body production

Tue, 14 Jan 2014

If you're going to build your own hot rod, you'll want to start with a '32 Ford 5-Window Coupe. Favored by American servicemen returning from World War II, the '32 Ford remains the very icon of the hot rod to this day. The trouble is there were only so many of them made in the first place, and finding one today can be a challenge. That's where reproduction models come in.
The aftermarket is replete with companies that will sell you a fiberglass body in the form of a '32 Ford coupe, but quality can be hit or miss. So to help meet demand among hot rod builders and enthusiasts, Ford has teamed up with United Pacific Industries to offer officially licensed body shells.
Announced at the SEMA show in November, the '32 Ford 5-Window Coupe body is made from stamped steel according to original specifications from original machinery where possible or reproduced machinery built to the same original specifications where necessary. The bodies are ready to accept vintage powertrains or crate motors from the Ford Racing catalog, and join the 9,000 other parts offered in the Ford Component Sales catalog - including similar reproduction bodies available for the 1965-70 Mustang and 1940 Ford Coupe. From there, the proverbial sky's the limit.

Ford 5 Window Coupe, Chevy Supercharged 350 Engine on 2040-cars

Ford Aerostar for Sale