1967 Ford Bronco Half Cab 4x4 on 2040-cars
Hattiesburg, Mississippi, United States
Has a new gas tank, filler neck, fuel lines, fuel pump, fuel filter, rebuilt carb and throttle cable. Has new master cylinder, brake lines, shoes and spring kits, doesn't have an emergency brake though. New starter and solenoid. New points and rotor. New bushings on the 3 speed column shift. new water temp gauge mounted under the dash. New timing chain and belt. Battery is a year old. Floor pans have rust spots in them. Missing the interior door panels. windows and door handles do work. Both door window are cracked but they are double paned. Passenger vent window is missing the hardware that holds it closed. Vacuum wipers are not hooked up, I don't know if they work or not. Speedometer and fuel gauge work on the instrument dash. 4 wheel drive works. I only have the top part to the original oil bath filter. I had to home make a bottom piece that holds an air filter just to have something on it. The PTO winch works. How it works is the transfer case is put in neutral, then you engage the PTO which is the little shifter besides the tall T-Shifter and then put in first or reverse to let in or out. it can also be free spooled out. The speedometer shows 57199 on it. The heater does not work. The interior needs work. Both seats are damaged. It is definitely a rare find. You wont find many of these. I will accept cashiers check or cash only and will release when funds are settled. You will be responsible for shipping or picking up the vehicle.
|
Ford Bronco for Sale
- Very clean bronco, no rust, clean title, automatic with 156,000 miles, new seats
- 1990 ford bronco eddie bauer 4 x 4(US $7,500.00)
- 100% ca truck~super clean! well maintained~1991,1993, 1992, 1996, 1990,1995(US $7,777.00)
- 1973 ford early bronco(US $14,000.00)
- 1975 ford bronco denver edition
- 1994 ford bronco xlt 5.8l v8 4wd
Auto Services in Mississippi
Venable Glass Services LLC ★★★★★
The Pit Stop ★★★★★
Texaco Xpress Lube ★★★★★
Slidell Collision Center ★★★★★
Pro Audio Center ★★★★★
O`Reilly Auto Parts ★★★★★
Auto blog
2015 Ford Mustang GT Line-Lock Burnout
Mon, 03 Nov 2014In this brief Short Cut, Autoblog's Steven Ewing demonstrates Line-Lock on the 2015 Ford Mustang GT. Accessed through an on-screen performance menu, the feature temporarily locks the front brakes to help you heat up the rear tires for better traction, as you would for drag racing. The result? A 15-second smokescreen.
Hennessey unleashes 2015 HPE700 supercharged Ford Mustang
Sun, 05 Oct 2014Thanks to the 2015 Dodge Challenger SRT Hellcat there is a new magic number in the muscle car world - 707. To raise eyebrows these days in the power war, a vehicle needs to match or preferably exceed that palindromic figure. The tuners over at Hennessey took a look at it for their 2015 HPE700 Mustang and decided to go one better. Well, ten actually, because they bestowed their latest creation with 717 horsepower and 632 pound-feet of torque.
The HPE 700 Mustang takes the standard Mustang GT with its 5.0-liter V8 and turns up the power a few hundred notches with a Roots-type supercharger running at 7.25 psi. Hennessey claims that this boosted 'Stang can rocket to 60 miles per hour in about 3.6 seconds and cover the quarter-mile in 11.2 seconds at 131 mph. For those keeping score at home, those figures are very similar to Challenger Hellcat.
To cope with all of the added boost, the engine gets a high-flow throttle body, upgraded injectors, new fuel pump, stainless steel exhaust and Hennessey's calibration for the engine management. Pricing for the package is $59,500, including the base 2015 Mustang GT, but the company is limiting production to 500 units for the 2015 model year. Founder John Hennessey told Autoblog that he has already received about a dozen orders for them.
Ford reveals new rapid prototyping and low-volume production techniques [w/video]
Mon, 08 Jul 2013It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.