Find or Sell Used Cars, Trucks, and SUVs in USA

1931 Model A Ford Tudor All Black With Yellow Wheels, Indiana! Runs & Original.. on 2040-cars

Year:1931 Mileage:100000
Location:

Jasonville, Indiana, United States

Jasonville, Indiana, United States

 This is a 1931 Ford Model A Tudor. Brakes are all new, Motor has lots of new parts- Distributor, all new wiring harness, new hoses, new coil. Pretty much everything to make it run as I never heard it run until we added all the new essential parts. Starts and runs great, new battery (6 volt) also added a power switch so you have to turn it on to avoid any wiring fires. Have extra tires I bought used but are in fair shape and a extra radiator. The springs are there for the back of the rear seat but the interior needs head liner and seats need redone. There is quite a few extra parts such as the spare tire holder which goes on the back of the car and have extra wheels that need refinished to put on the spare tire holder. Has new tail lights, originally only had drivers side only but I added the other tail light. Also put the new lights in the head lamps and added an ooga horn. windshield is in good shape but needs the rubber around it. It opens well and has the latches that holds it open. All windows open or roll down but some of the cranks are missing. I bought two mirrors which are door pin mirrors but haven't been put on yet. I also bought a motor meter radiator cap but haven't put it on yet. It is a very nice car and has a lot done already but still needs finished. I would take partial trade on a boat, or other things guys like that go bang. My number is eight one two 325 zero 316.  Under carriage is in good shape as well. Only selling because I went as far as I can go with it or as my health will allow.

Auto Services in Indiana

Xtreme Precision ★★★★★

Automobile Body Repairing & Painting, Automobile Parts & Supplies, Automobile Accessories
Address: 6051 E State Road 144, Mooresville
Phone: (317) 831-4800

Whetsel`s Automotive ★★★★★

Auto Repair & Service
Address: 43 Hough St, Finly
Phone: (317) 462-9461

USA Auto Mart ★★★★★

New Car Dealers, Used Car Dealers
Address: 1701 English Ave, Mc-Cordsville
Phone: (317) 634-2670

Tony Kinser Body Shop ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Dent Removal
Address: 2404 N Smith Pike, Bean-Blossom
Phone: (812) 558-0757

Tire Barn Warehouse ★★★★★

Auto Repair & Service, Tire Dealers, Wheels-Aligning & Balancing
Address: 10103 E Washington St, Wanamaker
Phone: (317) 898-8473

The Tire Store ★★★★★

Auto Repair & Service, Tire Dealers, Brake Repair
Address: 1905 E State Road 14, Tippecanoe
Phone: (574) 224-8473

Auto blog

Ford builds Lightweight Concept with Fusion shell [w/video]

Wed, 04 Jun 2014

It's a fairly well known fact that removing weight from a car is essentially a panacea for many of the modern automobiles problems. Does it handle like crap? Remove weight. Underpowered? Don't add power; trim the fat. Need to improve fuel economy? It's diet time.
Actually executing a major weight reduction program, though, much like with human beings, is no easy task. Unlike you or I, where motivation is the issue, the prohibitive measure in trimming a car's waistline is money. Lightweight materials are expensive, with carbon fiber and carbon-fiber reinforced plastic still primarily in the domain of higher end vehicles. Even aluminum construction, pioneered on a mass-produced level by Audi and Jaguar, is only now starting to make its way into the mainstream, thanks to the upcoming Ford F-150.
With this concept, though, Ford is attempting to show that a mass-produced, lightweight vehicle isn't too far off. This is the Lightweight Concept, and while it may look like a Fusion, it weighs as much as a Fiesta. For reference, the lightest Fusion available to the public is the 3,323-pound, 2.5-liter model with a manual transmission. A manually equipped, 1.6-liter Fiesta, meanwhile, is just 2,537 pounds.

These horribly misguided front-drive design studies nearly became the Mustang

Fri, 08 Nov 2013

As we eagerly await the unveiling of the all-new sixth-generation Mustang, Ford has been giving us some great information over the past few months showing what has gone into shaping its venerable pony car. As many changes as the Mustang has gone through in its 50 years, though, it appears the fourth-gen model played a decisive and pivotal role in the car's future.
As is part of Mustang lore, the front-wheel drive Ford Probe was originally developed as a next-generation Mustang in the Eighties before cooler heads prevailed. The Blue Oval has just released a handful of images showing how bad things could have been - including a full-scale clay model of a front-wheel-drive Mustang (shown above). Fortunately, the FWD Mustang plan was scrapped and Ford went to work designing a rear-wheel-drive replacement for the Fox Body Mustang, with three design studies making it far enough to become full-scale models. These include the soft "Bruce Jenner" Mustang, the over-the-top "Rambo" Mustang and the middle-ground "Arnold Schwarzenegger" Mustang, which finally became the basis for the 1994 'Stang.
By early 1991, the design language of the fourth-generation Mustang had been worked out, and the rest, they say, is history. Scroll down for the fascinating press release telling the story of the fourth-gen Mustang, and be sure to check out the gallery of horribly misguided sketches and various design studies that were all on the table in the late 1980s.

Ken Block's 1965 Ford Mustang Hoonicorn RTR and CR Supercars Villain are retro done right

Wed, 05 Nov 2014

Gymkhana king Ken Block has had a pretty simple car history in his trademark videos, starting out with Subaru Impreza rally cars before moving into Ford Focus racers for the past four installments. His next video, though, Gymkhana Seven, kind of goes back in time.
Rather than the cutting-edge rally racers of past videos, Block will pilot a heavily modified 1965 Ford Mustang, called the Hoonicorn. How heavily modified is it? Well, Block's Hooligan Racing Division, ASD Motorsports and Vaughn Gittin Jr.'s RTR, spent two years working on it, ditching the standard engine and rear-wheel-drive layout and replacing it with a 410-cubic-inch Roush Yates V8. Yes, that's a NASCAR engine, and it produces 845 horsepower.
A NASCAR-powered Mustang would be news in itself, but it's the other powertrain changes made by Block and Co. that really makes headlines. Power is channeled through a one-off Sadev transmission and all-wheel-drive system, meaning that Block has basically married a NASCAR stock car with a WRC racer. ASD also developed the customized suspension, tubular chassis and roll cage. The wide Mustang body is the work of RTR and Block's own Hoonigan Racing Division, while the 18-inch fifteen52 wheels are shod in Pirelli Trofeo R tires that use a specialized compound exclusive to Block.