Ford Ranger 2008 Xlt on 2040-cars

Auto blog

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.

2014 Ford Fusion to get 1.5L EcoBoost three-cylinder?

Just one year after launching the all-new 2013 Fusion, Ford is reportedly set to alter the sedan's powertrain lineup with the addition of a new 1.5-liter turbocharged three-cylinder EcoBoost engine. A member of Blue Oval Forums apparently got their hands on the ordering guide for the 2014 model year Fusion, and this 1.5-liter mill is set to be introduced with late availability.
This lines up with other news about the Chinese-market Mondeo being offered with a new 1.5-liter EcoBoost - a derivative of the 1.0-liter triple that will come to North America under the hood of the Fiesta (note: the 1.0 is also offered in the current Euro-spec Mondeo). In the Chinese application, the larger three-pot engine produces 177 horsepower and 177 pound-feet of torque, which is very close to the current 1.6-liter inline-four's output numbers of 178 hp and 184 lb-ft.
What's interesting, however, is that the 1.6-liter engine will reportedly still be offered in the Fusion, but only with the six-speed manual transmission. The smaller 1.5-liter EcoBoost will only be mated to a six-speed SelectShift automatic, and will feature start/stop. This means that while the 1.5 is slightly down on power compared to the 1.6, it could easily improve fuel economy numbers, allowing the Fusion to regain the title of having the best mileage in the segment, likely besting the 38 miles per gallon of the Nissan Altima. Currently, the Fusion 1.6 is rated at 23 mpg city and 36 mpg highway.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.