1968 Plymouth Valiant With R5p7 Dodge Nascar Engine!!! on 2040-cars
Lee's Summit, Missouri, United States
|
***NEWS FLASH*** The Valiant is gaining attention and notoriety before it’s even completed! Don’t let this car pass you by! See link below for the article.
http://www.dragzine.com/news/ebay-find-way-cool-68-valiant-with-elliot-built-dodge-nascar-motor/
1968 R5P7 Plymouth Valiant OVERVIEW No expense was spared for this build. The Valiant still needs to be completed and will be a totally unique, one-of-a-kind type car when finished. Picture yourself driving this stock-appearing, lightweight Mopar A-body with a 358cu.in.R5P7 Dodge Nascar engine producing over 750 horsepower! It has enough power to run into the high 9 second zone in the quarter mile and capable of 170mph plus top speed in the standing mile. With its superior oiling and very low valve spring pressure, you’ll be able to put countless miles on this engine without fear. The R5P7 Dodge Nascar engine has an unbelievable throttle response and sound, which will gain you attention and notoriety at the race track, stoplight or at your local cruise night. I have well over $25,000 invested in this project with a reserve price set that is less than 50% of my total cost! Bid with confidence as this is a once in a lifetime deal! This car will be sold in ‘’as is condition’’ with no warranty. The winning bidder must deposit $500 via Paypal within 24hours of the auction ending. The remainder of the balance will be due in full at time of pick up. If winning bidder fails to pick up the car or fails to pay in full at time of pick up, the deposit will be forfeited and the Valiant will be relisted for sale immediately. Winning bidder will also be responsible for arranging all transportation and the costs associated with it. The Valiant is currently located in the greater Kansas City, MO area (centrally located), which should be easier for transporting. BODY Very solid and in great shape, it has spent most of its life in Arizona and has a clean title. You’ll be hard pressed to find one in this shape! Body has been primed and sealed. The back glass and all side glass are in great condition, it does need a windshield. Front bumper is fiberglass and rear bumper is factory. The front grille is also in good shape. INTERIOR Dash and gauges are in good shape. The A-body Front buckets are in great condition. Rear seat does need to be re-upholstered. Dash pad along with the front and rear door panels are in great shape. No expense was spared in constructing the custom 10-point chrome moly roll cage that is tucked up out of the way for easy entry into the front and back seats along with being very well concealed. ENGINE Complete and ready to run R5P7 Dodge Nascar engine. This engine has been freshened and all it needs is a carburetor. Originally from Ernie Elliot’s engine shop, it has the best of everything. Sonny Bryant, Carillo, J&E, Total Seal, Jesel, Comp Cams, .937 key way lifters, titanium valves, etc… The camshaft has been changed to make peak power at a lower operating rpm to be more enjoyable for street use. This engine produced 768 horsepower @ 7900 rpm and 550ft.lbs. of torque @ 6700 rpm. It also made 557 hp @ 5500 rpm, 602 hp @ 6000 rpm, 702 hp @ 6700 rpm, and produced well over 700 plus horsepower @ 8900 rpm. That is an incredible average! This engine also comes with a brand new set of custom fabricated stainless steel Tri-Y headers with merge collectors. TRANSMISSION Freshly rebuilt 727 automatic transmission with manual valve body. No expense spared in the rebuild. Also included is an engine and flex plate adaptor to ‘’marry’’ the 727 trans to the R5P7 engine. WHEELS Front: Brand new Mickey Thompson Pro 5 wheels mounted on brand new Mickey Thompson 26’’ front runner tires. Rear: Brand new 15’’x8’’ Stockton Wheel Company steel wheels mounted on a pair of brand new Mickey Thompson 275 drag radial tires.
BRAKES Front: Brand new Strange front brake kit that includes lightweight hubs, bearings, rotors, calipers, pads and wheel studs. Rear: Standard OEM drum brakes that are compatible with 5’’x4.5’’ bolt pattern. SUSPENSION Front: Brand new Overkill Race Cars chrome moly k-member, upper and lower control arms and coil over shock mount kit along with a manual rack-n-pinion steering unit. Suspension does still need to be finalized but all components are there. If new owner prefers, I will also include the original V8 k-member along with upper and lower control arms that are 5’’x4.5’’ bolt pattern compatible at time of purchase. Rear: A-body 8 3/4 ’’ rear end that was custom narrowed to allow for better wheel and tire placement and has a 3.91 sure grip third member with Moser axles. Brand new Cal-Trac spilt mono-leafs with a brand new set of Smith Race Craft Max-Trac fully adjustable suspension bars. The rear portion of the leaf springs is mounted on a brand new set of sliders. A lot of time and effort went into achieving the perfect stance/ride height for this build.
THE TIME TO ACT IS NOW TO PURCHASE THIS UNIQUE ONE-OF-A-KIND BUILD! If you have any questions, please feel free to ask.
|
Plymouth Grand Voyager for Sale
2000 plymouth voyager base mini passenger van 4-door 2.4l(US $1,000.00)
1951 plymouth cambridge 4dr sedan
1946 plymouth coupe street rod
1997 plymouth grand voyager se mini passenger van 4-door 3.3l(US $2,500.00)
1951 plymouth cranbrook 92,840 original miles mint condition third owner
Valiant with, clutchless 3 sp on floor, air shocks(US $4,150.00)
Auto Services in Missouri
West 60 Auto Parts Inc ★★★★★
Wes Jerde Performance Center ★★★★★
Waterloo Automotive ★★★★★
The Dent Devil of St Louis ★★★★★
Springfield Yamaha ★★★★★
Spectrum Glass Inc ★★★★★
Auto blog
'Blood Muscle' auction to sell impressive collection of ill-begotten classic cars
Wed, 30 Jul 2014The old saying goes that if you can't do the time, don't do the crime. But being a criminal can involve more than just taking a trip to the big house; it can also mean losing possessions purchased from any ill-gotten gains. Still, one man's loss is another's gain, and if you're in Lodi, NJ, on September 12, you stand the chance to buy some of the ultimate muscle cars from the US Marshals in what is being gruesomely nicknamed the Blood Muscle auction.
The grisly moniker was earned because all of the vehicles belonged to the president of a blood testing company who is facing prison time for alleged bribery, according to Hemmings. After all, they are muscle cars bought with actual blood money. The seven-vehicle collection includes some of the ultimate muscle cars ever made, and the original buyer clearly had an eye for rarity.
This cornucopia of V8 power includes a teal 1970 Ford Mustang Boss 429, a 1967 Shelby GT500 Mustang, an orange 1970 Plymouth Superbird, a 1970 Chevrolet Chevelle SS convertible and perhaps most prized of all - a trio of 1969 Yenko Chevys with a Chevelle, Nova and Camaro all represented. From the included photos, all of them look to be in fantastic condition.
SRT belatedly claims Plymouth Prowler as one of its own
Wed, 19 Dec 2012Before Chrysler had Street and Racing Technology, it had Performance Vehicle Operations. What the two entities have in common, before SRT became its own brand, of course, is that each was created to take Chrysler and Dodge (and Plymouth, before it was unceremoniously killed off) vehicles to the next level of style and performance.
We'll leave the question of whether or not the old Plymouth (and later Chrysler) Prowler was ultimately a stylish, performance-oriented car to you, but the boys and girls currently leading the SRT charge at the Pentastar headquarters are keen to accept the retro-rod into the fold.
According to the automaker, all of SRT's current high-performance models owe a debt of gratitude to the old Prowler, due mostly to that car's use of lightweight bits and pieces and innovative construction techniques. If nothing else, the fact that the Prowler's frame is "the largest machined automotive part in history" is pretty cool. Read all the details here.
'71 Plymouth Hemi Cuda Convertible sells for $3.5M [w/video]
Mon, 16 Jun 2014
We're plenty used to seeing classic cars selling for millions of dollars. It's just that they're usually European: Ferraris, Bugattis, Mercedes and the like. There are some rare American exceptions, usually wearing the names Duesenberg or Shelby. But what we have here is the most expensive Chrysler product ever sold at auction.
The vehicle in question is a Plymouth Barracuda - specifically a 1971 Hemi Cuda Convertible, chassis #BS27R1B315367 - that Mecum Auctions just sold after eight solid minutes of feverish bidding for a high bid of $3.5 million at its auction in Seattle, Washington. That figure positively eclipses the $2.2 million paid for a strikingly similar Hemi Cuda (chassis #BS27R1B269588) fetched nearly seven years ago in Scottsdale and another that was the first muscle car to break the million-dollar mark in 2002.